• Production date from: 20150126
• Fitting Position: Lower Front Axle
• Name: Puks
• Manufacturer: MAX

• Diameter 4 [mm]: 14
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 16
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: mounting
• Mounting Type: Rubber-Metal Mount
• Quality class: PJ
• Name: Control arm bush left=right

• Fitting Position: Front Axle, inner, Lower, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 40
• Thickness 1 [mm]: 54
• Manufacturer: DELPHI
• Name: DE TD1708W

• Fitting Position: Lower, Lower Front Axle
• Manufacturer: GSP ZAWIESZENIE

• Production date from: 20150126
• Fitting Position: Rear Axle Lower
• Name: Puks
• Manufacturer: MAX

• Length [mm]: 54
• Width [mm]: 41
• Thickness [mm]: 54
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 22
• Material: Rubber/Metal
• Weight [kg]: 0.18
• Manufacturer: FEBI

Fitting Position: Front Axle Left, Front, Lower, Front Axle Right, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date to: 202012
• Weight [kg]: 0.149
• Packaging length [cm]: 11
• Packaging width [cm]: 2.8
• Packaging height [cm]: 2.8
• Length [mm]: 108
• Thread Size: M14x1,5
• Manufacturer: FEBEST
• Additional information: FBS0398-001
• Lisainfo: FBS0398-001

• Production date to: 201807
• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.142
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Packaging length [cm]: 3.9
• Packaging width [cm]: 3.9
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Production date to: 202401
• Fitting Position: Lower Front Axle
• Weight [kg]: 0.193
• Packaging length [cm]: 5.4
• Packaging width [cm]: 4.2
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• for OE number: 545513X000
• paired article number: 2256130
• Manufacturer: SASIC

• Length [mm]: 54
• Width [mm]: 41
• Thickness [mm]: 54
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 22
• Material: Rubber/Metal
• Weight [kg]: 0.18
• Name: SW 90 10 2673
• Manufacturer: SWAG

Fitting Position: Front Axle Left, Front, Lower, Front Axle Right, inner General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Production date to: 201807
• Fitting Position: Rear
• Weight [kg]: 0.187
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 41
• Packaging length [cm]: 4.4
• Packaging width [cm]: 4.1
• Packaging height [cm]: 4.1
• Manufacturer: FEBEST

• Production date to: 202401
• Weight [kg]: 0.13
• Packaging length [cm]: 9.9
• Packaging width [cm]: 2.8
• Packaging height [cm]: 2.8
• Manufacturer: FEBEST

• Fitting Position: Front Axle both sides, Lower, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41
• Height [mm]: 54
• Name: ALT 88585AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, both sides, Front
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 41
• Width [mm]: 54
• SVHC: No SVHC present!
• Manufacturer: FAG

• Height [mm]: 54
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laagripuks, ootshoob
• Manufacturer: MEY

Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner

• Production date to: 202401
• Fitting Position: Rear, inner
• Length [mm]: 79
• Weight [kg]: 0.185
• Quantity: 2
• Packaging length [cm]: 9.1
• Packaging width [cm]: 2.4
• Packaging height [cm]: 2.4
• Manufacturer: FEBEST
• Lisainfo: 0498-002-PCS2 FEBEST
• Additional information: 0498-002-PCS2 FEBEST

• Production date to: 202012
• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.199
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Packaging length [cm]: 4.5
• Packaging width [cm]: 4.2
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, inner, Lower, behind the axle
• Axle: Multi-link Axle
• Height 1 [mm]: 60
• Height 2 [mm]: 36
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 44
• Manufacturer: KAVO PARTS

• Production date to: 202012
• Fitting Position: Rear Axle, behind the axle
• Weight [kg]: 0.187
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 6
• Packaging width [cm]: 4.5
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 40
• Length [mm]: 54
• paired article number: 271579
• Weight [kg]: 0.21
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, inner, Lower

• Fitting Position: Rear Axle
• Fabrication Number: ZTT-NS-038B
• Manufacturer: NTY

• Production date to: 201810
• Fitting Position: Rear Axle
• Weight [kg]: 0.288
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 40
• Packaging length [cm]: 6
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• Production date to: 202401
• Fitting Position: inner, Rear
• Weight [kg]: 0.438
• Packaging length [cm]: 7
• Packaging width [cm]: 7
• Packaging height [cm]: 6
• Manufacturer: FEBEST

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 22
• Inner Diameter [mm]: 12
• Height [mm]: 54
• Guarantee: 3 years guarantee or up to 75,000km
• Manufacturer: METZGER

Fitting Position: Front Axle Left, Front Axle Right, both sides, Front, inner

• Fitting Position: Rear Axle Left, Rear Axle Right
• Overall Length [mm]: 59
• Inner Diameter [mm]: 14.1
• Outer Diameter [mm]: 44.1
• Control/Trailing Arm Type: Control Arm
• Manufacturer: METALCAUCHO

• Production date to: 201807
• Fitting Position: Rear Axle Lower
• Weight [kg]: 0.27
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 44
• Packaging length [cm]: 5.9
• Packaging width [cm]: 4.4
• Packaging height [cm]: 4.4
• Manufacturer: FEBEST

• Fitting Position: Front Axle both sides, Lower, Rear
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 70
• Height [mm]: 60
• Name: ALT 93955AL
• Manufacturer: ALTE AUTOMOTIVE

• Production date to: 201807
• Fitting Position: Rear Axle
• Weight [kg]: 0.329
• Packaging length [cm]: 7
• Packaging width [cm]: 4.4
• Packaging height [cm]: 4.4
• Manufacturer: FEBEST

• Production date to: 201807
• Fitting Position: Lower Front Axle, Rear
• Weight [kg]: 0.461
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 70
• Packaging length [cm]: 7.1
• Packaging width [cm]: 7.1
• Packaging height [cm]: 6
• Manufacturer: FEBEST

• Production date to: 201807
• Fitting Position: Lower, outer, Centre, Rear Axle
• Weight [kg]: 0.395
• Packaging length [cm]: 6.8
• Packaging width [cm]: 6.8
• Packaging height [cm]: 4.5
• Manufacturer: FEBEST

• Fitting Position: inner, outer, Rear Axle, Upper
• Axle: Multi-link Axle
• Shape: round
• Mounting Type: Press-fitted, Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Required quantity: 1
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 41.1
• Height [mm]: 44.5
• Name: Puks
• Manufacturer: TRI

• Production date to: 201807
• Fitting Position: Rear Axle Upper, Front, Right
• Weight [kg]: 0.709
• Inner Diameter [mm]: 14
• Packaging length [cm]: 12.5
• Packaging width [cm]: 7.6
• Packaging height [cm]: 7.6
• Manufacturer: FEBEST

• Production date to: 201807
• Fitting Position: Left, Rear Axle Upper, Front
• Weight [kg]: 0.71
• Inner Diameter [mm]: 14
• Packaging length [cm]: 12.5
• Packaging width [cm]: 7.5
• Packaging height [cm]: 7.5
• Manufacturer: FEBEST