• Fabrication Number: ECT-HY-002
• Manufacturer: NTY
• Name: NTY ECT-HY-002

Manufacturer: MAGNETI MARELLI

• for OE number: 3 930 084 400
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 25
• Pressure to [kPA]: 95
• Fabrication Number: ECM-HY-502
• Manufacturer: NTY

• Fabrication Number: ECM-HY-504
• Manufacturer: NTY

• Engine Code: D4CB
• Number of pins: 2
• Voltage [V]: 12
• Thread Size: M 14x1,5
• Housing Colour: black
• Manufacturer: FAE

• Number of pins: 3
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: D4CB
• Thread Size: 3/8 GAS
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: D4CB
• Thread Size: M14x1,5
• Spanner Size: 21
• Name: EP 1.994.019
• Manufacturer: EPS

• Number of pins: 3
• Weight [kg]: 0.04
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: D4CB
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MAX

• Engine Code: D4CB
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550461
• Manufacturer: ERA

• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: before soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Fabrication Number: ECS-HY-000
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fitting Position: before soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV802

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of connectors: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Housing Type: with housing
• Fabrication Number: EPP-HY-503
• Manufacturer: NTY

• Engine Code: D4CB
• Fitting Position: Intake Manifold
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Alternatively:
• Number of pins: 4
• Alternative Repair Kit: 551110
• Manufacturer: ERA

• Number of pins: 4
• Pressure from [kPA]: 34
• Manufacturer: DELPHI

• Engine Code: D4CB
• Number of pins: 3
• Fitting Depth [mm]: 28
• Manufacturer: ERA

• Engine Code: D4CB
• Fitting Position: Intake Manifold
• Pressure from [kPA]: 29
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.48
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: EPS

• Engine Code: D4CB
• Pressure from [kPA]: 18
• Pressure to [kPA]: 300
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Construction Year from: 12.2008
• Weight [kg]: 0.29
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV173

• Production date from: 29.04.2015
• Emission Standard: Euro 6
• Number of connectors: 2
• Number of pins: 3
• Fitting Position: before soot particulate filter
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fabrication Number: EFP-HY-001
• Manufacturer: NTY
• Name: NTY EFP-HY-001

• for OE number: 28164-27800
• Manufacturer: KAMOKA

Manufacturer: MAGNETI MARELLI

• Number of pins: 4
• Pressure from [kPA]: 25
• Pressure to [kPA]: 95
• Manufacturer: FAE

Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Production date from: 29.04.2015
• Emission Standard: Euro 6
• Fitting Position: before soot particulate filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 2
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fabrication Number: ESL-HY-513
• Manufacturer: NTY

Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased Fitting Position: Front, before catalytic converter, after catalytic converter

• Engine Code: D4CB
• Fitting Position: Rear
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur,ohuvotu rohk
• Manufacturer: EPS

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping range from [mm]: 10, 11, 11.5, 12.5
• Clamping range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Construction Year from: 12.2008
• Construction Year to: 05.2021
• Emission Standard: Euro 5
• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Colour: black
• Name: Andur,ktuserohk
• Manufacturer: MAX

• Name: Andur, heitgaasisurve
• Manufacturer: MAG

• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Number of pins: 3
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MEY

• Number of pins: 4
• Weight [kg]: 0.023
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: BREMI
• Lisainfo: 30354 NRF
• Additional information: 30354 NRF

• for article number: 86239E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Fitting Position: Charge Air Cooler
• Number of pins: 4
• Connector Shape: oval
• Number of mounting bores: 2
• Pressure [Pa] from: 25,000
• Pressure [Pa] to: 95,000
• Manufacturer: METZGER

• Length [mm]: 28
• Outer Diameter [mm]: 18
• Number of connectors: 3
• Weight [kg]: 0.017
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Engine Code: D4CB
• Fitting Position: before catalytic converter
• Cable Length [mm]: 350
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.389
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PA009166801

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Quantity: 1
• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10391-12B1

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Model Year to: 2015
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Front
• Number of connectors: 5
• Manufacturer: VERNET

• Construction Year from: 12.2008
• Construction Year to: 12.2015
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 360
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 5
• Suction pipe connector diameter [mm]: 80
• Assy./disassy. by qualified personnel required!:
• Name: HE 8ET009149201
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Emission Standard: Euro 4 (D4), Euro 5
• Number of pins: 10
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Lambda Sensor: Regulating Probe
• Construction Year from: 12.2008
• Fitting Position: before catalytic converter
• Length [mm]: 400
• Number of pins: 6
• Manufacturer: FAE

• Engine Code: D4CB
• Required quantity: 1
• Housing Type: with housing
• Length [mm]: 96
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Name: EP 1.991.376
• Manufacturer: EPS

• Construction Year from: 12.2008
• Construction Year to: 05.2021
• Emission Standard: Euro 4 (D4), Euro 5
• Fuel Mixture Formation: Common Rail (CR)
• Supplementary Article/Info 2: High Pressure Side
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

Technical Information: The product fitted must be identified on the vehicle or, engine

• Construction Year from: 12.2008
• Construction Year to: 05.2021
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Lambda Sensor: Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 410
• for OE number: 55204005, 55564978, 5801529676, 82 00 420 670
• Manufacturer: MEAT&DORIA

• Fitting Position: before soot particulate filter
• Production date from: 27.03.2018
• Emission Standard: Euro 6c
• for OE number: 296504A870
• Number of pins: 5
• Connector Shape: oval
• Socket colour: black
• Number of mounting bores: 2
• Version: AM
• Manufacturer: METZGER

• Fitting Position: before soot particulate filter
• Production date from: 01.05.2015
• Emission Standard: Euro 6
• for OE number: 296504A200
• Number of pins: 5
• Connector Shape: oval
• Socket colour: black
• Number of mounting bores: 2
• Version: AM
• Manufacturer: METZGER

• Fitting Position: after soot particulate filter
• Production date from: 27.03.2018
• Emission Standard: Euro 6c
• for OE number: 296504A880
• Number of pins: 5
• Connector Shape: oval
• Socket colour: black
• Number of mounting bores: 2
• Version: AM
• Manufacturer: METZGER