• Fitting Position: Rear Axle Left
• Sensor Type: Hall Sensor
• Cable Length [mm]: 1,200
• Number of pins: 2

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 62
• Outer Diameter [mm]: 74
• Width [mm]: 12
• Number of Teeth: 48
• Name: ANDUR,ABS
• Manufacturer: MAX
• Lisainfo: 27-0317
• Additional information: 27-0317

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 73
• Outer Diameter [mm]: 87
• Width [mm]: 10
• Number of Teeth: 48
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 73
• Width [mm]: 15.2
• Outer Diameter [mm]: 87
• Number of Teeth, ABS ring: 48
• Name: Andur,ABS
• Manufacturer: TRI

• for OE number: 95670 2E310
• Overall Length [mm]: 1,090
• Sensor Type: Hall Sensor
• Number of pins: 2
• Fitting Depth [mm]: 30
• Connector Shape: rectangular
• Fitting Position: Front Axle Right
• Fabrication Number: HCA-HY-539
• paired article number: HCA-HY-538
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-HY-538
• paired article number: HCA-HY-539
• Manufacturer: NTY

• Fitting Position: Right Front
• Length [mm]: 110
• Number of pins: 2
• paired article number: 06SKV466
• Colour: black
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Left Front
• Length [mm]: 1,035
• Cable Length [mm]: 1,015
• Number of pins: 2
• paired article number: 06SKV467
• Voltage [V]: 12
• Colour: black
• Guarantee: 3 years guarantee
• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV466

• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 73
• Width [mm]: 10
• Outer Diameter [mm]: 87
• Number of Teeth, ABS ring: 48
• Name: ANDUR,ABS
• Manufacturer: TRI

• Fitting Position: Rear Axle Right
• Sensor Type: Hall Sensor
• Length [mm]: 1,200
• Socket colour: white

• Fitting Position: Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 1,100
• Socket colour: black

• Fitting Position: Front Axle Left
• Sensor Type: Active sensor
• Length [mm]: 1,100
• Socket colour: black

• Fitting Position: Rear Axle Left
• Fabrication Number: HCA-KA-314
• paired article number: HCA-KA-315

• Fitting Position: Front Axle, Front Axle Left
• Supplementary Article/Info 2: with cable
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• paired article number: ADG071110
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 1,115
• Weight [kg]: 0.138
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 172538
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Cable Length [mm]: 1,000
• Weight [kg]: 0.136
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Connector Shape: rectangular
• Overall Length [mm]: 1,190
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 28
• Fabrication Number: HCA-KA-315
• paired article number: HCA-KA-314
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Overall Length [mm]: 1,230
• Number of pins: 2
• Weight [kg]: 0.15
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV468
• Manufacturer: ESEN SKV

• paired article number: 107583
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 1,115
• Weight [kg]: 0.138
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• Overall Length [mm]: 1,165
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 1,100
• paired article number: 30795
• Weight [kg]: 0.22
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Overall Length [mm]: 1,165
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 1,100
• paired article number: 30794
• Weight [kg]: 0.21
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Left
• Overall Length [mm]: 1,270
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: white
• Cable Length [mm]: 1,200
• paired article number: 30797
• Weight [kg]: 0.2
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle Right
• Cable Length [mm]: 1,250
• Sensor Type: Active sensor
• paired article number: 06-S444
• Manufacturer: OPTIMAL ZAWIESZENIE

• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.135
• Fitting Position: Rear Axle Right
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• paired article number: 33 10 5919
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Cable Length [mm]: 1,115
• Weight [kg]: 0.138
• Name: SW 33 10 5936
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,230
• Manufacturer: DELPHI
• Name: DE SS20521

• Fitting Position: Front Axle Left
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,100
• Name: Andur, rattap””rete arv
• Manufacturer: DLP

• Fitting Position: Rear Axle, Right, Rear Axle Right
• Quantity: 1
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.135
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Right
• Required quantity: 1
• Cable Length [mm]: 1,094
• Fitting Depth [mm]: 28
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear Axle Right
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,200
• Name: Andur, rattap””rete arv
• Manufacturer: DLP

• Fitting Position: Rear Axle Right
• Overall Length [mm]: 1,270
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: white
• Cable Length [mm]: 1,200
• paired article number: 30796
• Weight [kg]: 0.22
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,100
• Name: Andur, rattap””rete arv
• Manufacturer: DLP

• Fitting Position: Rear Axle Left
• Quantity: 1
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,230
• Name: Andur, rattap””rete arv
• Manufacturer: DLP

• Fitting Position: Rear Axle Right
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,230
• Manufacturer: DELPHI

• Fitting Position: Front Axle, Front Axle Right
• Number of pins: 2
• Connector Shape: rectangular
• Overall Length [mm]: 1,090
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 30
• for OE number: 95670 2E310
• Manufacturer: MEAT&DORIA

• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Weight [kg]: 0.135
• Fitting Position: Rear Axle Left
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Inner Diameter [mm]: 73
• Outer Diameter [mm]: 87
• Width [mm]: 10
• Fitting Position: Front Axle both sides
• Number of Teeth, ABS ring: 48
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 1
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 1
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 1
• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front Axle Left
• Cable Length [mm]: 1,070
• Sensor Type: Active sensor
• paired article number: 06-S630
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle Right
• Required quantity: 1
• Cable Length [mm]: 1,230
• Fitting Depth [mm]: 28
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear Axle Right
• Length [mm]: 1,110
• Sensor Type: Active sensor
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!