• Fitting Position: Front Axle
• Spring Type: for vehicles with air suspension
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Height [mm]: 62
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Centering Diameter [mm]: 79
• Surface: Coated
• Net weight [kg]: 12.06
• Lisainfo: pakendis 1 tk
• Additional information: pakendis 1 tk

• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles with height-adjustable suspension
• Fitting Position: Rear Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 350
• Brake Disc Thickness [mm]: 20
• Number of Holes: 5
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles without height-adjustable suspension
• Fitting Position: Rear Axle
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 325
• Brake Disc Thickness [mm]: 20
• Number of Holes: 5
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles without height-adjustable suspension
• Fitting Position: Front Axle
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 317
• Brake Disc Thickness [mm]: 30
• Number of Holes: 5
• Surface: Coated
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Vehicle Identification Number (VIN) from: *********DA000001
• Spring Type: for vehicles with coil spring suspension
• Brake Disc Thickness [mm]: 20
• Rim Hole Number: 5
• Thickness [mm]: 59
• Outer Diameter [mm]: 325
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 17
• Centering Diameter [mm]: 79
• Weight [kg]: 7.7
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: *********DA000001
• Spring Type: for vehicles with coil spring suspension
• Brake Disc Thickness [mm]: 20
• Rim Hole Number: 5
• Thickness [mm]: 59
• Outer Diameter [mm]: 325
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 17
• Centering Diameter [mm]: 79
• Weight [kg]: 8.35
• Observe service information:
• Name: PIDURIKETAS
• Manufacturer: BLP
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Brake Disc Thickness [mm]: 20
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 59
• Outer Diameter [mm]: 350
• Bolt Hole Circle Ø [mm]: 120
• Machining: High-carbon
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 17
• Centering Diameter [mm]: 79
• Weight [kg]: 9.26
• Observe service information:
• Manufacturer: FEBI
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Spring Type: for vehicles without air suspension
• Height [mm]: 62
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Number of bores: 1
• Outer Diameter [mm]: 317
• Number of Holes: 5
• Centering Diameter [mm]: 79
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Manufacturer: SKF TARCZE HAM

• Vehicle Identification Number (VIN) from: *********DA000001
• Spring Type: for vehicles with coil spring suspension
• Brake Disc Thickness [mm]: 30
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 62
• Outer Diameter [mm]: 317
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 27
• Centering Diameter [mm]: 79
• Weight [kg]: 10
• Observe service information:
• Manufacturer: FEBI HAMULCE
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: *********DA000001
• Spring Type: for vehicles with coil spring suspension
• Brake Disc Thickness [mm]: 20
• Rim Hole Number: 5
• Thickness [mm]: 59
• Outer Diameter [mm]: 325
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 17
• Centering Diameter [mm]: 79
• Weight [kg]: 7.7
• Name: SW 22 94 3849
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Shock Absorber System: Normal Suspension
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 20
• Number of Holes: 5
• Height [mm]: 59
• Centering Diameter [mm]: 79
• Outer Diameter [mm]: 325
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 17
• Tightening Torque [Nm]: 140
• Manufacturer: BREMBO
• Name: BR 09.8874.31
• Quality class: Q

• Fitting Position: Rear Axle
• Spring Type: for vehicles with air suspension
• Block Separation:
• for model code: Discovery
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E1 90R-02C0460/1469
• Surface: Coated
• Outer Diameter [mm]: 350
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17
• Centering Diameter [mm]: 79
• Height [mm]: 59.4
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG3925C

• Fitting Position: Front Axle
• Shock Absorber System: Normal Suspension
• Block Separation:
• for model code: Discovery
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E4 90R-02C0703/2626
• Surface: Coated
• Outer Diameter [mm]: 317
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Centering Diameter [mm]: 79
• Height [mm]: 62
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE BG9006C
• Quantity per packing unit: 2
• Quality class: PJ

• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles with height-adjustable suspension
• Fitting Position: Front Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Number of Holes: 5
• Surface: Coated
• Manufacturer: JP GROUP
• Lisainfo: Brake Disc
• Additional information: Brake Disc

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Brake Disc Type: Externally Vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 350
• Brake Disc Thickness [mm]: 20
• Height [mm]: 60
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Minimum thickness [mm]: 17
• Weight [kg]: 8.9
• Hole Arrangement/Number: 7/5
• Manufacturer: ZIMMERMANN
• Additional information: 450-5203-20
• Lisainfo: 450-5203-20

• Brake Disc Thickness [mm]: 20
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 59
• Outer Diameter [mm]: 350
• Bolt Hole Circle Ø [mm]: 120
• Machining: High-carbon
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Rear Axle
• Minimum thickness [mm]: 17
• Centering Diameter [mm]: 79
• Weight [kg]: 9.26
• Observe service information:
• Manufacturer: BLUE PRINT
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: *********DA000001
• Spring Type: for vehicles with coil spring suspension
• Brake Disc Thickness [mm]: 30
• Rim Hole Number: 5
• Number of mounting bores: 1
• Thickness [mm]: 62
• Outer Diameter [mm]: 317
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 27
• Centering Diameter [mm]: 79
• Weight [kg]: 10.07
• Observe service information:
• Name: PIDURIKETAS
• Manufacturer: BLP
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Shock Absorber System: Normal Suspension
• Quantity per packing unit: 2
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E1 90R-02C0460/1466
• Surface: Coated
• Outer Diameter [mm]: 325
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17
• Centering Diameter [mm]: 79
• Height [mm]: 59.5
• Name: DE BG4020C
• Manufacturer: DELPHI

• Vehicle Identification Number (VIN) from: DA000001
• Spring Type: for vehicles with coil spring suspension
• Fitting Position: Rear Axle
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 20
• Outer Diameter [mm]: 325
• Height [mm]: 59
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Surface: Coated
• Rim Hole Number: 5
• Name: Piduriketas
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Quantity per packing unit: 2
• Outer Diameter [mm]: 325
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17
• Height [mm]: 59.5
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Centering Diameter [mm]: 79
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Hub Diameter [mm]: 211
• Weight [kg]: 7.54
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Special Purpose Vehicle: not for armoured vehicles
• Fitting Position: Rear Axle
• Bolt Hole Circle Ø [mm]: 79
• Height [mm]: 60
• Outer Diameter [mm]: 350
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 18
• Number of bores: 5
• Brake Disc Type: Vented
• Surface: painted
• Tightening Torque [Nm]: 140
• for OE number: SDB000646
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Brake Disc Type: Vented
• Outer Diameter [mm]: 350
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17
• Number of Holes: 5
• Centering Diameter [mm]: 79
• Height [mm]: 59
• Bolt Hole Circle Ø [mm]: 120
• Thread Size: 15
• Colour: black
• Surface: painted
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 09.2010
• Construction Year to: 12.2017
• Fitting Position: Rear Axle
• Spring Type: for vehicles with air suspension
• Outer Diameter [mm]: 350
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17
• Height [mm]: 59.4
• Bolt Hole Circle Ø [mm]: 120
• Brake Disc Type: Vented
• Centering Diameter [mm]: 79
• Number of Holes: 5
• Surface: Coated
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Shock Absorber System: Normal Suspension
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 30
• Number of Holes: 5
• Height [mm]: 62
• Centering Diameter [mm]: 79
• Outer Diameter [mm]: 317
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 27
• Tightening Torque [Nm]: 140
• Manufacturer: BREMBO
• Name: BR 09.8873.31
• Quantity per packing unit: 2
• Quality class: Q

• Construction Year from: 09.2010
• Construction Year to: 12.2017
• Fitting Position: Front Axle
• Spring Type: for vehicles without air suspension
• Outer Diameter [mm]: 317
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Height [mm]: 62
• Bolt Hole Circle Ø [mm]: 120
• Brake Disc Type: Vented
• Centering Diameter [mm]: 79
• Number of Holes: 5
• Surface: Oiled
• Machining: High-carbon
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15
• Manufacturer: BOSCH

• Special Purpose Vehicle: not for armoured vehicles
• Quantity per packing unit: 2
• Fitting Position: Rear Axle
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 20
• Outer Diameter [mm]: 350
• Height [mm]: 59.4
• Centering Diameter [mm]: 79
• Surface: Coated
• Supplementary Article/Info 2: with bolts/screws
• Minimum thickness [mm]: 18
• Hole Arrangement/Number: 5/7
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle
• Spring Type: for vehicles with air suspension
• Outer Diameter [mm]: 350
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17
• Height [mm]: 59.5
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Centering Diameter [mm]: 79
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Hub Diameter [mm]: 222
• Weight [kg]: 8.8
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle
• Shock Absorber System: Normal Suspension
• Quantity per packing unit: 2
• Centering Diameter [mm]: 79
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 30
• Outer Diameter [mm]: 317
• Bolt Hole Circle Ø [mm]: 120
• Number of Holes: 5
• Minimum thickness [mm]: 27
• Thread Size: 15
• Height [mm]: 62
• Colour: black
• Surface: painted
• Machining: High-carbon
• Test Mark: E1 90R-02 C0176/0687
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles with height-adjustable suspension
• Outer Diameter [mm]: 350
• Brake Disc Thickness [mm]: 20
• Brake Disc Type: Externally Vented
• Minimum thickness [mm]: 17
• Height [mm]: 59
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: painted
• Number of Holes: 5
• Name: Piduriketas
• Manufacturer: QUARO

• Fitting Position: Rear Axle
• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles without height-adjustable suspension
• Quantity per packing unit: 2
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 325
• Brake Disc Thickness [mm]: 20
• Height [mm]: 59
• Minimum thickness [mm]: 17
• Surface: Coated
• Inner Diameter [mm]: 210
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Hole Arrangement/Number: 05/07
• Wheel Bolt Bore Diameter [mm]: 15
• Packaging length [cm]: 34.3
• Packaging width [cm]: 34.3
• Packaging height [cm]: 14.5
• Weight [kg]: 7.7
• Manufacturer: TEXTAR TARCZE HAMULCOWE

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Special Purpose Vehicle: not for armoured vehicles
• Quantity per packing unit: 2
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 20
• Number of Holes: 5
• Height [mm]: 59
• Centering Diameter [mm]: 79
• Outer Diameter [mm]: 350
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 17
• Tightening Torque [Nm]: 140
• Manufacturer: BREMBO
• Name: BR 09.8876.31
• Quality class: Q

• Fitting Position: Front Axle
• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles without height-adjustable suspension
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 317
• Brake Disc Thickness [mm]: 30
• Height [mm]: 62
• Minimum thickness [mm]: 27
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Hole Arrangement/Number: 05/06
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Weight [kg]: 10
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355118641
• Manufacturer: HELLA PAGID

• Construction Year from: 09.2010
• Construction Year to: 12.2017
• Fitting Position: Rear Axle
• Spring Type: for vehicles without air suspension
• Outer Diameter [mm]: 325
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17
• Height [mm]: 59.5
• Bolt Hole Circle Ø [mm]: 120
• Brake Disc Type: Vented
• Centering Diameter [mm]: 79
• Number of Holes: 5
• Surface: Coated
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15
• Manufacturer: BOSCH
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Outer Diameter [mm]: 317
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Height [mm]: 62
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Centering Diameter [mm]: 79
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Hub Diameter [mm]: 177
• Weight [kg]: 10.12
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Special Purpose Vehicle: not for armoured vehicles
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 350
• Height [mm]: 59
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17
• Centering Diameter [mm]: 79
• Bolt Hole Circle Ø [mm]: 120
• Wheel Bolt Bore Diameter [mm]: 15
• Number of Holes: 5
• Brake Disc Type: Vented
• Surface: Zink flake coated
• Quality: PREMIUM
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

General Information: MEYLE-PD brake disc with high-grade finish and brillant appearance: Modern cutting-edge coating technology for long lasting anti-corrosion protection. No degreasing needed, ready-to-fit. Easy rim disassembly due to coated mounting surfaces.

• Fitting Position: Rear Axle
• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles with height-adjustable suspension
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 350
• Brake Disc Thickness [mm]: 20
• Height [mm]: 59
• Minimum thickness [mm]: 17
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Hole Arrangement/Number: 05/07
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Weight [kg]: 8.8
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355118781
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles without height-adjustable suspension
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 317
• Brake Disc Thickness [mm]: 30
• Height [mm]: 62
• Minimum thickness [mm]: 27
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 165
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Hole Arrangement/Number: 05/06
• Wheel Bolt Bore Diameter [mm]: 15
• Packaging length [cm]: 32.8
• Packaging width [cm]: 32.8
• Packaging height [cm]: 10.5
• Weight [kg]: 10
• Name: PIDURIKETAS
• Manufacturer: TEX
• Quantity per packing unit: 2

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Rear Axle
• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles with height-adjustable suspension
• Quantity per packing unit: 2
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 350
• Brake Disc Thickness [mm]: 20
• Height [mm]: 59
• Minimum thickness [mm]: 17
• Surface: Coated
• Inner Diameter [mm]: 210
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Hole Arrangement/Number: 05/07
• Wheel Bolt Bore Diameter [mm]: 15
• Packaging length [cm]: 35.8
• Packaging width [cm]: 35.8
• Packaging height [cm]: 13.5
• Weight [kg]: 8.8
• Name: PIDURIKETAS
• Manufacturer: TEX

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: AA222221
• Brake Disc Type: internally vented
• Machining: High-carbon
• Surface: Coated
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Height [mm]: 62
• Rim Hole Number: 5
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Test Mark: ECE R90 APPROVED
• Minimum thickness [mm]: 27
• Weight [kg]: 12.4
• Hole Arrangement/Number: 6/5
• Manufacturer: ZIMMERMANN
• Quantity per packing unit: 2
• Additional information: 450-5202-20
• Lisainfo: 450-5202-20

• Fitting Position: Rear Axle
• Shock Absorber System: Normal Suspension
• Quantity per packing unit: 2
• Centering Diameter [mm]: 79
• Thread Size: 15
• Bolt Hole Circle Ø [mm]: 120
• Minimum thickness [mm]: 17
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 20
• Outer Diameter [mm]: 325
• Number of Holes: 5
• Height [mm]: 59
• Colour: black
• Surface: painted
• Machining: High-carbon
• Manufacturer: TRW
• Quality class: Q
• Name: Brake discs

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Test Mark: E1 90R-02C0460/1466
• Brake Disc Type: Vented
• Number of Holes: 5
• Outer Diameter [mm]: 325
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17
• Centering Diameter [mm]: 79
• Height [mm]: 59
• Quality class: PJ
• Name: Brake discs

• Fitting Position: Rear Axle
• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles without height-adjustable suspension
• Brake Disc Type: Externally Vented
• Outer Diameter [mm]: 325
• Brake Disc Thickness [mm]: 20
• Height [mm]: 59
• Minimum thickness [mm]: 17
• Surface: Coated
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Hole Arrangement/Number: 05/07
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Weight [kg]: 7.7
• Assy./disassy. by qualified personnel required!:
• Name: HE 8DD355118771
• Manufacturer: HELLA PAGID

• Special Purpose Vehicle: not for armoured vehicles
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 350
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17
• Brake Disc Type: Vented
• Surface: Coated
• Machining: Alloyed/High-carbon
• Number of Holes: 5
• MAPP code available:
• Bolt Hole Circle Ø [mm]: 120
• Height [mm]: 59
• Centering Diameter [mm]: 79
• Inner Diameter [mm]: 210
• Bore Diameter [mm]: 15
• Test Mark: E1 90R-02C0234/1321
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quality class: Q

• Installatsiooni pool: Tagasild
• Kõrgus (mm): 59
• Piduriketta liik: õhutusega
• Pidurikettajämedus [mm]: 20
• Miinimumjämedus (mm): 17
• Aukude arv: 5
• Välisläbimõõt [mm]: 350
• Tsentri läbimõõt (mm): 79
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Height [mm]: 48.5
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 25
• Minimum thickness [mm]: 23
• Outer Diameter [mm]: 320
• Number of Holes: 5
• Centering Diameter [mm]: 63.5
• Bolt Hole Circle Ø [mm]: 108
• Surface: Coated
• Manufacturer: SKF TARCZE HAM

• Fitting Position: Front Axle
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles without height-adjustable suspension
• Outer Diameter [mm]: 317
• Brake Disc Thickness [mm]: 30
• Brake Disc Type: internally vented
• Minimum thickness [mm]: 27
• Height [mm]: 62
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: painted
• Number of Holes: 5
• Name: Piduriketas
• Manufacturer: QUARO

• Special Purpose Vehicle: not for armoured vehicles
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 350
• Height [mm]: 59
• Brake Disc Thickness [mm]: 20
• Minimum thickness [mm]: 17
• Centering Diameter [mm]: 79
• Bolt Hole Circle Ø [mm]: 120
• Wheel Bolt Bore Diameter [mm]: 15
• Number of Holes: 5
• Brake Disc Type: Vented
• Surface: Zink flake coated
• Machining: High-carbon
• Quality: PREMIUM
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

General Information: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.

• Vehicle Identification Number (VIN) from: *********DA000001
• Spring Type: for vehicles with air suspension
• Brake Disc Thickness [mm]: 30
• Rim Hole Number: 5
• Number of mounting bores: 2
• Thickness [mm]: 62.1
• Outer Diameter [mm]: 360
• Bolt Hole Circle Ø [mm]: 120
• Machining: High-carbon
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 27
• Centering Diameter [mm]: 79
• Weight [kg]: 12.06
• Observe service information:
• Manufacturer: FEBI-UKLAD HAMULCOWY
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Shock Absorber System: Normal Suspension
• Installatsiooni pool: Esisild
• Kõrgus (mm): 62
• Piduriketta liik: õhutusega
• Pidurikettajämedus [mm]: 30
• Miinimumjämedus (mm): 27
• Aukude arv: 5
• Välisläbimõõt [mm]: 317
• Tsentri läbimõõt (mm): 79
• Manufacturer: DRIVE

• Vehicle Identification Number (VIN) from: *********DA000001
• Spring Type: for vehicles with air suspension
• Brake Disc Thickness [mm]: 30
• Rim Hole Number: 5
• Number of mounting bores: 2
• Thickness [mm]: 62
• Outer Diameter [mm]: 360
• Bolt Hole Circle Ø [mm]: 120
• Machining: High-carbon
• Surface: Coated
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 27
• Centering Diameter [mm]: 79
• Weight [kg]: 12.06
• Observe service information:
• Manufacturer: BLUEPRINT
• Quantity per packing unit: 2

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spring Type: for vehicles with air suspension
• Suspension: for vehicles with height-adjustable suspension
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 27
• Height [mm]: 62
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: painted
• Machining: High-carbon
• Number of Holes: 5
• Name: Piduriketas
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Spring Type: for vehicles with air suspension
• Block Separation:
• for model code: Discovery
• Brake Disc Type: Vented
• Number of Holes: 5
• Test Mark: E1 90R-02C0343/1765
• Surface: Coated
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Centering Diameter [mm]: 79
• Height [mm]: 62.1
• Name: DE BG9007C
• Manufacturer: DELPHI
• Quantity per packing unit: 2

• Spring Type: for vehicles with air suspension
• Suspension: for vehicles with height-adjustable suspension
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Brake Disc Type: internally vented
• Fitting Position: Front Axle
• Minimum thickness [mm]: 27
• Height [mm]: 62
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Supplementary Article/Info 2: without wheel hub, without wheel studs
• Surface: painted
• Number of Holes: 5
• Name: Piduriketas
• Manufacturer: QUARO
• Lisainfo: QD3524
• Additional information: QD3524

• Fitting Position: Front Axle
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Height [mm]: 62
• Rim Hole Number: 5
• Brake Disc Type: Vented
• Centering Diameter [mm]: 79
• Bolt Hole Circle Ø [mm]: 120
• Surface: Coated
• Hub Diameter [mm]: 187
• Weight [kg]: 12.06
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: AA222221
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 30
• Number of Holes: 5
• Height [mm]: 62
• Centering Diameter [mm]: 79
• Outer Diameter [mm]: 360
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 27
• Tightening Torque [Nm]: 140
• Name: BR 09.8877.31
• Manufacturer: BREMBO

Brief Information: PVT vented disc. The PVT disc uses, in its ventilation chamber, pillars instead of vanes. Disc cooling capacity is enhanced by an extra 40% and therefore provides more resistance against thermal cracking.

• Vehicle Identification Number (VIN) to: AA222221
• Fitting Position: Front Axle
• Bolt Hole Circle Ø [mm]: 79
• Height [mm]: 63
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 28
• Number of bores: 5
• Brake Disc Type: Vented
• Surface: painted
• Tightening Torque [Nm]: 140
• for OE number: SDB000624
• Manufacturer: JAPKO

• Construction Year from: 01.2011
• Brake System: Brembo
• Fitting Position: Front Axle
• Test Mark: ECE-R90
• Height [mm]: 62
• Brake Disc Type: Vented
• Brake Disc Thickness [mm]: 30
• Outer Diameter [mm]: 360
• Number of Holes: 5
• Centering Diameter [mm]: 79
• Surface: painted
• Manufacturer: METELLI UKL.HAMULCOWY
• Quantity per packing unit: 2

• Fitting Position: Front Axle
• Special Purpose Vehicle: not for armoured vehicles
• Suspension: for vehicles with height-adjustable suspension
• Brake Disc Type: internally vented
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Height [mm]: 62
• Minimum thickness [mm]: 27
• Machining: High-carbon
• Surface: Coated
• Inner Diameter [mm]: 174.8
• Bolt Hole Circle Ø [mm]: 120
• Centering Diameter [mm]: 79
• Hole Arrangement/Number: 05/06
• Wheel Bolt Bore Diameter [mm]: 15
• Packaging length [cm]: 37.3
• Packaging width [cm]: 37.3
• Packaging height [cm]: 10.5
• Weight [kg]: 12
• Name: Piduriketas
• Manufacturer: TEX
• Quantity per packing unit: 2

Supplementary Article/Info 2: without wheel hub, without wheel bearing, without wheel studs

• Construction Year from: 09.2010
• Construction Year to: 12.2017
• Fitting Position: Front Axle
• Spring Type: for vehicles with air suspension
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Height [mm]: 62
• Bolt Hole Circle Ø [mm]: 120
• Brake Disc Type: Vented
• Centering Diameter [mm]: 79
• Number of Holes: 5
• Surface: Coated
• fulfils ECE norm: ECE-R90
• Bore Diameter up to [mm]: 15
• Name: PIDURIKETAS
• Manufacturer: BOS

• Vehicle Identification Number (VIN) to: AA222221
• Fitting Position: Front Axle
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Brake Disc Type: Vented
• Surface: Coated
• Number of Holes: 5
• Bolt Hole Circle Ø [mm]: 120
• Height [mm]: 62
• Centering Diameter [mm]: 79
• Inner Diameter [mm]: 175
• Bore Diameter [mm]: 15
• Test Mark: E1 90R-02C0115/1004
• MAPP code available:
• Name: PIDURIKETAS
• Manufacturer: ATE
• Quantity per packing unit: 2
• Quality class: Q

• Fitting Position: Front Axle
• Spring Type: for vehicles with air suspension
• Brake Disc Type: Vented
• Outer Diameter [mm]: 360
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Number of Holes: 5
• Centering Diameter [mm]: 79
• Height [mm]: 62
• Bolt Hole Circle Ø [mm]: 120
• Thread Size: 15
• Colour: black
• Surface: painted
• Machining: High-carbon
• Test Mark: E190R-02C0176/0584
• Name: PIDURIKETAS
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Spring Type: for vehicles with air suspension
• Fitting Position: Front Axle
• Outer Diameter [mm]: 360
• Height [mm]: 62
• Brake Disc Thickness [mm]: 30
• Minimum thickness [mm]: 27
• Centering Diameter [mm]: 79
• Bolt Hole Circle Ø [mm]: 120
• Wheel Bolt Bore Diameter [mm]: 15
• Number of Holes: 5
• Brake Disc Type: Vented
• Surface: Zink flake coated
• Machining: High-carbon
• Quality: PREMIUM
• Required quantity: 2
• Name: PIDURIKETAS
• Manufacturer: MEY

General Information: High-carbon MEYLE-PD brake disc. Increased carbon content of brake disc material to 3.6-3.9% due to a special high carbonization process. The result: Better warping resistance because of increased thermal conductivity.

• Spring Type: for vehicles with air suspension
• Installatsiooni pool: Esisild
• Kõrgus (mm): 62,1
• Piduriketta liik: õhutusega
• Pidurikettajämedus [mm]: 30
• Miinimumjämedus (mm): 27
• Aukude arv: 5
• Välisläbimõõt [mm]: 360
• Tsentri läbimõõt (mm): 79
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: AA222221
• Brake Disc Type: internally vented
• Brake Disc Thickness [mm]: 30
• Number of Holes: 5
• Height [mm]: 62
• Centering Diameter [mm]: 79
• Outer Diameter [mm]: 360
• Machining: High-carbon
• Surface: Coated
• Minimum thickness [mm]: 27
• Tightening Torque [Nm]: 135
• Manufacturer: BREMBO
• Name: BR 09.B858.11
• Quantity per packing unit: 2
• Quality class: Q