• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 19
• Thread Size: M10x1,5
• Thread Type: with external thread
• Spanner Size: Torx-50
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M10x1.5 19,0mm Torx-50 2tk
• Additional information: M10x1.5 19,0mm Torx-50 2tk

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 18.9
• Thread Size: M10x1,5
• Material: Steel
• Surface: Geomitrised
• Bolt Head-/Nut Design: Female Torx
• Available as universal article as well, see article no.: TPM1000
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Quantity per packing unit: 2
• Thread Size: M10 x 1,5 x 19mm
• Required quantity: 2
• Manufacturer: METZGER

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 1,210
• Fabrication Number: HCZ-LR-012
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,156
• Fabrication Number: HCZ-LR-001
• Manufacturer: NTY

• for brake disc diameter [mm]: 360
• Vehicle Identification Number (VIN) from: 7A000001
• Fitting Position: Front Axle
• Number of pins: 2
• Wear Warning Contact: Change warning contact together with the pads
• Brake Type: Disc Brake
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle, Front Axle
• Brake Type: Disc Brake
• Length [mm]: 1,235
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX

• Brake System: TRW
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,180
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX

• Brake System: TRW
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: TRW
• Length 1 [mm]: 1,180
• Brake Type: Disc Brake
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0194

• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Warning Contact Length [mm]: 1,156
• Required quantity: 1
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Piduriliik: Ketaspidur
• Installatsiooni pool: Tagasild
• Pikkus (mm): 951
• Ühenduste arv: 2
• Manufacturer: JPN

• Vehicle Identification Number (VIN) from: *********AA000001
• Length [mm]: 1,227
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.06
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Manufacturer Restriction: TRW
• Length [mm]: 1,180
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,178
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO
• Name: BR A 00 265

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-LR-007
• Manufacturer: NTY
• Name: NTY HCA-LR-007

• Vehicle Identification Number (VIN) from: *********AA000001
• Length [mm]: 1,227
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.06
• Name: SW 22 93 1821
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: TRW
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Version: with elec park brake
• Fitting Position: Rear Axle
• Brake System: TRW
• Name: FR 901822
• Manufacturer: FRENKIT

• Fitting Position: Front Axle
• Brake System: Brembo
• Length 1 [mm]: 1,220
• Brake Type: Disc Brake
• Name: DE LZ0245
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,183
• Packaging length [cm]: 26
• Packaging width [cm]: 15
• Packaging height [cm]: 1
• Weight [kg]: 0.055
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX
• Lisainfo: 96990-0394
• Additional information: 96990-0394

• Length [mm]: 1,211
• Number of connectors: 2
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.05
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild
• Kaal (kg): 0,168
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 950
• Number of connectors: 2
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 1,425
• Number of connectors: 2
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.06
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: AA000001
• Brake Type: Disc Brake
• Length [mm]: 1,210
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: TRW
• Length [mm]: 1,180
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0261A

• Fitting Position: Rear Axle
• Required quantity: 1
• Brake Type: Disc Brake
• Length [mm]: 1,156
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE
• Quality class: Q

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-LR-008
• Manufacturer: NTY
• Name: NTY HCA-LR-008

• Fitting Position: Rear Axle Left, Rear Axle Right
• Brake Type: Disc Brake
• Length [mm]: 1,180
• Weight [kg]: 0.05
• Number of wear indicators [per axle]: 1
• Manufacturer Restriction: TRW
• Manufacturer: ABS

• Length [mm]: 950
• Number of connectors: 2
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.04
• Name: SW 22 94 7372
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: Brembo
• Length [mm]: 1,215
• Supplementary Article/Supplementary Info: Axle Kit
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Length [mm]: 1,183
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 1,213
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO HAMULCE

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: TRW
• Weight [kg]: 0.035
• Warning Contact Length [mm]: 1,180
• Manufacturer: TOMEX C

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 1,229
• Weight [kg]: 0.06
• Number of wear indicators [per axle]: 1
• Manufacturer: ABS

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: AA000000
• Brake Type: Disc Brake
• Length [mm]: 1,229
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Length [mm]: 1,213
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake System: BREMBO
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle
• Brake System: Brembo
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Cable Length [mm]: 1,070
• Number of pins: 2
• Sensor Type: Active sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Cable Length [mm]: 990
• Number of pins: 2
• Sensor Type: Active sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Additional information: 120-02-091 ABAK
• Lisainfo: 120-02-091 ABAK

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: Active sensor
• Cable Length [mm]: 1,250
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Brake System: TRW
• Manufacturer: METZGER

• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 1,122
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Cable Length [mm]: 1,070
• Manufacturer: ASHIKA

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,075
• Weight [kg]: 0.075
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 2
• Cable Length [mm]: 1,065
• Fitting Depth [mm]: 28.2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle
• Brake System: BREMBO
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,065
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20166

• Fitting Position: Rear Axle
• Brake System: TRW
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Brake System: BREMBO
• Weight [kg]: 0.42
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Overall Length [mm]: 1,170
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 1,065
• paired article number: 30569
• Weight [kg]: 0.12
• Manufacturer: ABS

• Fitting Position: Front Axle
• Manufacturer: FEBEST
• Additional information: FBS2903-001
• Lisainfo: FBS2903-001

• Fitting Position: Front Axle
• Overall Length [mm]: 1,100
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: grey
• Cable Length [mm]: 1,005
• paired article number: 30585
• Weight [kg]: 0.11
• Manufacturer: ABS

• Fitting Position: Front Axle
• Manufacturer Restriction: BREMBO
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 1,005
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Manufacturer: KAMOKA
• Additional information: 1180139 KAMOKA
• Lisainfo: 1180139 KAMOKA

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Manufacturer: KAMOKA
• Additional information: 1180140 KAMOKA
• Lisainfo: 1180140 KAMOKA

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Surface: painted, Cathodic Painting
• paired article number: 57785
• Diameter 1/Diameter 2 [mm]: 110 / 375
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Cathodic Painting, painted
• Diameter 1/Diameter 2 [mm]: 110 / 375
• paired article number: 57786
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• paired article number: 11371
• Weight [kg]: 1.1
• Manufacturer: ABS

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• paired article number: 11370
• Weight [kg]: 1.1
• Manufacturer: ABS