• Fitting Position: Rear Axle
• WVA Number: 24192
• Test Mark: E9 90R-01825/1240
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 117
• Width 2 [mm]: 116
• Height 1 [mm]: 46
• Thickness 1 [mm]: 17
• Name: Brake pads
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
kulumimärguande näidiku jaoks ettevalmistatud
Jämedus 1 [mm]: 17,50
Kõrgus 1 (mm): 46,30
Laius 1 (mm): 116,80 Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
kulumimärguande näidiku jaoks ettevalmistatud
Jämedus 1 [mm]: 17,50
Kõrgus 1 (mm): 46,30
Laius 1 (mm): 116,80

• Vehicle Identification Number (VIN) from: AA257941
• Vehicle Identification Number (VIN) to: BA716231
• Fitting Position: Rear Axle
• Brake System: Lucas
• Height [mm]: 46.3
• Width [mm]: 117
• Thickness [mm]: 17.3
• Wear Warning Contact: prepared for wear indicator
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Fitting Position: Rear Axle Left, Rear Axle Right, Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,156
• Fabrication Number: HCZ-LR-001
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right, Front Axle
• Brake Type: Disc Brake
• Fabrication Number: HCZ-LR-009
• Manufacturer: NTY

• Fitting Position: Front Axle
• Required quantity: 1
• Brake Type: Disc Brake
• Length [mm]: 1,227
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Weight [kg]: 0.06
• Brake Type: Disc Brake
• Warning Contact Length [mm]: 1,227
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Brake System: TRW
• Length 1 [mm]: 1
• Brake Type: Disc Brake
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0194

• Vehicle Identification Number (VIN) from: *********AA000001
• Length [mm]: 1,227
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.06
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: *********AA000001
• Length [mm]: 1,227
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.06
• Name: SW 22 93 1821
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Manufacturer Restriction: TRW
• Length [mm]: 1,180
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,178
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO
• Name: BR A 00 265

• Fitting Position: Rear Axle Left, Rear Axle Right
• Brake Type: Disc Brake
• Length [mm]: 1,180
• Weight [kg]: 0.05
• Number of wear indicators [per axle]: 1
• Manufacturer Restriction: TRW
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Length [mm]: 1,230
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Manufacturer Restriction: TRW
• Width 1 [mm]: 116.7
• Height [mm]: 46.5
• Thickness [mm]: 17.4
• Wear Warning Contact: prepared for wear indicator
• Test Mark: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Required quantity: 1
• Brake Type: Disc Brake
• Length [mm]: 1,156
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: TRW
• Length [mm]: 1,180
• Supplementary Article/Supplementary Info: Axle Kit
• Name: QB WS0261A
• Manufacturer: QUICK BRAKE

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: TRW
• Weight [kg]: 0.035
• Warning Contact Length [mm]: 1,180
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Length [mm]: 1,183
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Warning Contact Length [mm]: 1,156
• Required quantity: 1
• Manufacturer: MEYLE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 1,229
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: TRW
• Length [mm]: 1,230
• Supplementary Article/Supplementary Info: Axle Kit
• Name: QB WS0278A
• Manufacturer: QUICK BRAKE

• Vehicle Identification Number (VIN) from: AA257941
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 116.5
• Height [mm]: 46.5
• Thickness [mm]: 17
• WVA Number: 24192
• Test Mark: ECE R90 APPROVED
• Manufacturer: JAPKO

• Vehicle Identification Number (VIN) from: AA257941
• Vehicle Identification Number (VIN) to: AA257940
• Fitting Position: Rear Axle
• Thickness [mm]: 17.4
• Width [mm]: 116.7
• Height [mm]: 46.5
• Wear Warning Contact: prepared for wear indicator
• Brake System: TRW
• Weight [kg]: 1.22
• Manufacturer: TOMEX BRAKES

• Length [mm]: 116.7
• Width [mm]: 46.4
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17.4
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.208
• Supplementary Article/Info 2: with screw set
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Thickness [mm]: 17.1
• Width [mm]: 116.6
• Height [mm]: 46.5
• Brake System: Trw
• Supplementary Article/Info 2: with brake caliper screws
• Manufacturer: OPTIMAL ZAWIESZENIE

• Construction Year from: 07.2010
• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 117
• Height [mm]: 46
• Thickness [mm]: 18
• WVA Number: 24192
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.11
• Name: VA 302405
• Manufacturer: VALEO

• Length [mm]: 117
• Width [mm]: 46
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.208
• Supplementary Article/Info 2: with screw set
• Manufacturer: BLUEPRINT
• Additional information: ADJ134205
• Lisainfo: ADJ134205

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 116.7
• Width [mm]: 46.4
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17.4
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with screw set
• Name: SW 22 11 6118
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Thickness [mm]: 18
• Width [mm]: 192
• Height [mm]: 72
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Lucas / TRW
• Supplementary Article/Info 2: with brake caliper screws
• Manufacturer: KAMOKA

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: AA256675
• Width 1 [mm]: 116.6
• Height 1 [mm]: 46.4
• Thickness 1 [mm]: 17.1
• Brake System: TRW
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.17
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• FMSI Code: D1099-8203
• Test Mark: E9 90R-01825/1240
• WVA Number: 24192
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 116.8
• Width 2 [mm]: 116.5
• Height 1 [mm]: 46.3
• Height 2 [mm]: 46.3
• Thickness 1 [mm]: 17.4
• Thickness 2 [mm]: 17.4
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1936

• Fitting Position: Front Axle
• Test Mark: E9 90R - 01107/2730
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Wear Warning Contact: prepared for wear indicator
• Manufacturer Restriction: TRW
• Width [mm]: 193
• Height [mm]: 72
• Thickness [mm]: 18.7
• Quality class: PJ
• Name: Brake pads

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: AA257940
• Width [mm]: 117
• Thickness [mm]: 17
• Height [mm]: 46
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Lucas
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 24192
• Manufacturer: BREMBO
• Name: BR P 44 019

• Fitting Position: Front Axle
• Width [mm]: 192.7
• Height [mm]: 72.2
• Thickness [mm]: 18.5
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 350
• Number of pads: 4
• Thickness [mm]: 17.5
• Length [mm]: 116.7
• Height [mm]: 46.3
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: With bevelled edges
• Brake System: TRW
• WVA Number: 24192
• Name: SK VKBP90257
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: AA257941
• Vehicle Identification Number (VIN) to: BA716231
• Width [mm]: 117
• Thickness [mm]: 17
• Height [mm]: 46
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Lucas
• Supplementary Article/Info 2: with brake caliper screws
• WVA Number: 24192
• Manufacturer: BREMBO
• Name: BR P 44 013

• Fitting Position: Rear Axle
• Manufacturer Restriction: TRW
• Width [mm]: 116.7
• Height [mm]: 46.5
• Thickness [mm]: 17.4
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E9 90R - 01120/1240
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

SVHC: No information available, please contact the manufacturer!

• Construction Year from: 07.2010
• Construction Year to: 06.2011
• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 117
• Height [mm]: 46.4
• Thickness [mm]: 17.4
• WVA Number: 24192
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.115
• Manufacturer: VALEO

• Fitting Position: Front Axle
• Width 1 [mm]: 192.7
• Height 1 [mm]: 72.2
• Thickness 1 [mm]: 18.5
• Brake System: TRW
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.99
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Thickness [mm]: 18.7
• Width [mm]: 192.6
• Height [mm]: 72.2
• Wear Warning Contact: prepared for wear indicator
• Brake System: TRW
• Weight [kg]: 3.2
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Width [mm]: 116.7
• Thickness [mm]: 17
• Height [mm]: 46.3
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with anti-squeak plate, with brake caliper screws
• Fulfils ECE norm: R90
• Manufacturer: METZGER

• Construction Year from: 07.2010
• Fitting Position: Front Axle
• Brake System: TRW
• Width [mm]: 193
• Height [mm]: 72
• Thickness [mm]: 18
• WVA Number: 25021
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 2.95
• Name: VA 302409
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Manufacturer Restriction: TRW
• Width [mm]: 116.7
• Height [mm]: 46.5
• Thickness [mm]: 17.4
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E990R-02A1148/1240
• Manufacturer: TRW

Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!

• Length [mm]: 192.6
• Width [mm]: 72.2
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 18.7
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 3.146
• Supplementary Article/Info 2: with screw set
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• FMSI Code: D1479-8542
• Test Mark: E9 90R-01841/2730
• WVA Number: 25021 25022 25203 25
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 192.9
• Width 2 [mm]: 192.5
• Height 1 [mm]: 72.5
• Height 2 [mm]: 72.5
• Thickness 1 [mm]: 18
• Thickness 2 [mm]: 18
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Length [mm]: 193
• Width [mm]: 72
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 19
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 3.146
• Supplementary Article/Info 2: with screw set
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: AA257940
• Article number of recommended accessories: 8DK 355 251-331
• Width [mm]: 116.9
• Height [mm]: 46.3
• Thickness [mm]: 17.3
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 24192
• Brake System: Lucas
• Name: HE 8DB355016181
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: AA257941
• Article number of recommended accessories: 8DK 355 251-331
• Width [mm]: 116.9
• Height [mm]: 46.3
• Thickness [mm]: 17.3
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 24192
• Brake System: Lucas
• Weight [kg]: 1.15
• Name: HE 8DB355011981
• Manufacturer: HELLA PAGID

• Fitting Position: Rear Axle
• Width [mm]: 116.6
• Height [mm]: 46.4
• Thickness [mm]: 17.1
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Test Mark: E9 90R-01229/1240
• MAPP code available:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: BA264633
• Braking System: for vehicles with Performance brakes
• for brake disc diameter [mm]: 360
• Number of pads: 4
• Thickness [mm]: 18.7
• Length [mm]: 192.7
• Height [mm]: 72.2
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: Without Bevelled Edges
• Brake System: TRW
• WVA Number: 25021, 25022, 25203, 25204
• Name: SK VKBP80324
• Manufacturer: SKF

• Fitting Position: Front Axle
• Material: Low-Metallic
• Thickness [mm]: 18.7
• Width [mm]: 192.6
• Height [mm]: 72.2
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Manufacturer Restriction: TRW
• Width [mm]: 192.6
• Height [mm]: 72.2
• Thickness [mm]: 18.7
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Test Mark: E9 90R - 01107/2730
• directional:
• Manufacturer: TRW
• Lisainfo: GDB1898
• Additional information: GDB1898

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 117
• Height [mm]: 46
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply, with spring
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Braking System: for vehicles without Performance brakes
• Number of pads: 4
• Thickness [mm]: 16.5
• Length [mm]: 189.8
• Height [mm]: 95.6
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: With bevelled edges
• Brake System: Brembo
• WVA Number: 24659
• Name: SK VKBP80449
• Manufacturer: SKF

• Fitting Position: Front Axle
• Width [mm]: 193
• Thickness [mm]: 19
• Height [mm]: 72
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: TRW
• Supplementary Article/Info 2: with brake caliper screws
• directional:
• WVA Number: 25203, 25204, 25021, 25022
• Manufacturer: BREMBO
• Name: BR P 44 022

• Fitting Position: Front Axle
• Manufacturer Restriction: TRW
• Width [mm]: 192.6
• Height [mm]: 72.2
• Thickness [mm]: 18.7
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Test Mark: E990R-02A1062/2730
• Manufacturer: TRW

Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Width [mm]: 192.8
• Height [mm]: 72.1
• Thickness [mm]: 18.6
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories, with counterweights
• directional:
• WVA Number: 25022
• Brake System: TRW
• Observe mounting information:
• Weight [kg]: 2.98
• Name: HE 8DB355015551
• Manufacturer: HELLA PAGID

• Fitting Position: Front Axle
• Width [mm]: 192.7
• Height [mm]: 72.2
• Thickness [mm]: 18.5
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Number of bolts/screws: 4
• Brake System: Lucas / TRW
• Article number of recommended accessories: 24.8190-0814.2
• Test Mark: E9 90R-01247/3185
• MAPP code available:
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Rear Axle
• Braking System: Low dust brake pads
• Brake System: TRW
• Width [mm]: 117
• Height [mm]: 46
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• for brake disc diameter [mm]: 360
• Fitting Position: Front Axle
• Brake System: TRW
• Width [mm]: 193
• Height [mm]: 72
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply, with spring
• Supplementary Article/Info 2: with bolts/screws
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 360
• Braking System: Low dust brake pads
• Brake System: TRW
• Width [mm]: 193
• Height [mm]: 72
• Thickness [mm]: 19
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN