• Colour: grey
• Number of connectors: 2
• Manufacturer: JP GROUP A/S
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Fitting Position: Left
• Vehicle Identification Number (VIN) to: (V)6A999999
• Thread Size: M18x1.5
• Cable Length [mm]: 420
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: MHK500910
• Quality: OE
• Weight [g]: 94
• Gross Weight [g]: 127
• Manufacturer: DENSO
• Name: DN DOX-0414

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
DISCOVERY III (TAA),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
DISCOVERY III (TAA),
(kvaliteediklass: Q)"

• Fitting Position: Left
• Vehicle Identification Number (VIN) from: (V)7A000001
• Thread Size: M18x1.5
• Cable Length [mm]: 230
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: MHK501050
• Quality: OE
• Weight [g]: 80
• Gross Weight [g]: 113
• Manufacturer: DENSO
• Name: DN DOX-0416

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
DISCOVERY III (TAA),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
DISCOVERY III (TAA),
(kvaliteediklass: Q)"

• Fitting Position: Right
• Vehicle Identification Number (VIN) to: (V)6A999999
• Thread Size: M18x1.5
• Cable Length [mm]: 370
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: MHK500960
• Quality: OE
• Weight [g]: 88
• Gross Weight [g]: 121
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
DISCOVERY III (TAA),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
DISCOVERY III (TAA),
(kvaliteediklass: Q)"

• for OE number: 9675342080
• Spanner Size: 19
• Housing Colour: grey
• Manufacturer: KAMOKA

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: 3/8 NPT
• for OE number: 3F1A12A648AA
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: 448PN(AJV8)
• Thread Size: 3/818NPT
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: 448PN(AJV8)
• Thread Size: 3/818NPT
• Spanner Size: 19
• Manufacturer: FACET

• Pistikukatte kuju: ovaalne
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: S19
• Keermemõõt: NPT3/8
• Manufacturer: NISSENS

• Thread Size: 3/8" x 18 NPT
• Spanner Size: 19
• Number of pins: 2
• Colour Coding: white
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: grey
• Shape: rectangular
• Housing Colour: grey
• Number of pins: 2
• Thread Size: NPT3/8
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Number of connectors: 2
• Colour: grey
• Weight [kg]: 0.029
• for OE number: 1 802 332
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: Right
• Fitting Depth [mm]: 29
• Number of connectors: 2
• Number of mounting bores: 1
• Cable Length 1 [mm]: 180
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Inductive Sensor
• Connector Shape: angular
• Colour: grey/black
• Name: SN CMP161.08
• Manufacturer: SNR

• Construction Year to: 09.2006
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Housing Type: without housing
• Fabrication Number: EPP-MZ-001
• Manufacturer: NTY
• Name: NTY EPP-MZ-001

• Fitting Position: Right
• Length [mm]: 230
• Number of pins: 2
• Name: DE SS11467
• Manufacturer: DELPHI

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of pins: 5
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: AB 120-08-085
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Right
• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Fitting Position: Left
• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Oxygen Sensor: Diagnostic Probe
• Cable Length [mm]: 900
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe, Heated
• Length [mm]: 230
• Resistor [Ohm]: 13
• Conductor Number: 4
• Number of circuits: 4
• Cable Length [mm]: 230
• Manufacturer: MAGNETI MARELLI

• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Number of pins: 5
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Oxygen Sensor: Diagnostic Probe
• Vehicle Identification Number (VIN) from: (V)7A000001
• Fitting Position: Left, Right
• Exhaust System: after catalytic converter
• Block Separation:
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Left
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0109
• Additional information: DOX-0109 DENSO
• Lisainfo: DOX-0109 DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Thread Size: M18x1.5
• Cable Length [mm]: 300
• Number of pins: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-LR-004
• Manufacturer: NTY

Lisainfo: ENG. 4.2,4.4 LAND ROVER DISCOVERY III 04-09, RANGE ROVER III 04-12, RANGE ROVER SPORT I 05-13 / REGULACYJNA DLA KATALIZATORA WSTPNEGO, Dœ.KABLI 300MM Additional information: ENG. 4.2,4.4 LAND ROVER DISCOVERY III 04-09, RANGE ROVER III 04-12, RANGE ROVER SPORT I 05-13 / REGULACYJNA DLA KATALIZATORA WSTPNEGO, Dœ.KABLI 300MM

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV107

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV151

Manufacturer: MAGNETI MARELLI

• Housing Type: without housing
• Number of pins: 5
• Name: PRZEPYWOMIERZ POWIETRZA LEXYS GS 300 00-
• Manufacturer: VDO

• Fitting Position: after catalytic converter
• Cable Length [mm]: 484
• Oxygen Sensor: Planar Sensor, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Lisainfo: ES20364-12B1
• Additional information: ES20364-12B1

• Engine Code: 448PN(AJV8)
• Housing Type: without housing
• Name: EP 1.991.163
• Manufacturer: EPS

• for OE number: 1380084E00000
• Manufacturer: MEAT&DORIA

• Engine Code: 448PN(AJV8)
• Housing Type: without housing
• Manufacturer: FACET

• Number of pins: 5
• Supplementary Article/Info 2: with seal ring
• Number of Holes: 2
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Mounting Type: Bolted
• Number of pins: 5
• Housing Colour: black
• Plug Type: Male
• Assy./disassy. by qualified personnel required!:
• Name: OHUMASSIMOOTJA
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 448PN(AJV8)
• Operating Mode: Electric
• Voltage [V]: 12
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Fitting Position: Left, Right
• Oxygen Sensor: Regulating Sensor, Heated
• Exhaust System: for pre-catalytic converter
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 460
• Weight [kg]: 0.092
• Name: SW 33 10 3141
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Number of circuits: 4
• Cable Length [mm]: 200
• Weight [kg]: 0.076
• Observe service information:
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 5
• for OE number: 22204-21010
• Quality: OE
• Operating Mode: Electric
• Gross Weight [g]: 79
• alternative item: -
• Manufacturer: DENSO
• Name: DN DMA-0113

Additional information: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)"

• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• for OE number: MHK500840, MHK500880
• Thread Size: M18x1.5
• Cable Length [mm]: 300
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 92
• Gross Weight [g]: 120
• Manufacturer: DENSO
• Name: DN DOX-0525

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Broadband Oxygen Sensor, Thread pre-greased