• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER
• Additional information: WS3038 VERNET
• Lisainfo: WS3038 VERNET

• Fitting Position: Front
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 120-01-086

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: both sides, Front, Rear, inner
• Fabrication Number: EPDC-LR-004
• Manufacturer: NTY

• Fabrication Number: CZW-LR-011
• Manufacturer: NTY

• Anduritüüp: NTC-andur
• Montaaživiis: Fikseerimisühendus
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• OE-numbri jaoks: 1338E5
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: NRF

• Number of pins: 2
• Housing Colour: black
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV646
• Manufacturer: ESEN SKV

• Vehicle Identification Number (VIN) from: 6A351057
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-LR-002
• Manufacturer: NTY
• Name: NTY HCA-LR-002

• Fitting Position: inner, Front
• Fabrication Number: EPDC-LR-000
• Manufacturer: NTY

• Fitting Position: outer, Rear, Front
• Fabrication Number: EPDC-LR-001
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-LR-007
• Manufacturer: NTY
• Name: NTY HCA-LR-007

Manufacturer: NRF KLIMATYZACJA

• Fitting Position: Rear
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• for OE number: 735393479
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: straight
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Fitting Position: Left, Right, outer, inner, Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Fitting Position: inner, Left, Right, outer, Rear, Front
• Construction Year from: 11.2004
• Vehicle Identification Number (VIN) from: 5A342950
• Vehicle Identification Number (VIN) to: 5A342949
• Sensor Type: Ultrasonic Sensor
• Length [mm]: 46
• Length from [mm]: 46
• Width [mm]: 27
• Height [mm]: 44.8
• Colour: black
• Shape: angled
• Number of connectors: 3
• Chemical Properties: Paintable
• Name: Parking sensor
• Quality class: PJ

Lisainfo: (kvaliteediklass PJ) Additional information: (kvaliteediklass PJ)

• Fitting Position: Rear
• Manufacturer: YSPARTS

• Construction Year from: 09.2004
• Construction Year to: 08.2009
• Vehicle Identification Number (VIN) from: 6A351057
• Sensor Type: Active sensor
• Cable Length [mm]: 1,200
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: straight
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV056

• Fitting Position: Front
• Colour: black
• Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Colour: black
• Material: Plastic
• Number of pins: 2
• Number of connectors: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear, Front
• Colour: black
• Shape: straight
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Cable Length [mm]: 1,070
• Number of pins: 2
• Sensor Type: Active sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Cable Length [mm]: 990
• Number of pins: 2
• Sensor Type: Active sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Additional information: 120-02-091 ABAK
• Lisainfo: 120-02-091 ABAK

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: Active sensor
• Cable Length [mm]: 1,250
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fabrication Number: EZC-FR-205
• Manufacturer: NTY
• Name: NTY EZC-FR-205

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.015
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.2004
• Construction Year to: 08.2009
• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 1,122
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.015
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: NRF

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 55
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358381091
• Manufacturer: HELLA

• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 980
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20167

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Cable Length [mm]: 1,075
• Weight [kg]: 0.075
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 2
• Cable Length [mm]: 1,065
• Fitting Depth [mm]: 28.2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• for OE number: JTF500010
• Manufacturer: MEAT&DORIA

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,065
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20166

• Fitting Position: Rear, Front
• Length [mm]: 63
• Width [mm]: 20
• Height [mm]: 30
• Colour: black
• Shape: straight
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Over-paintable
• Housing Colour: black
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 95
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11479

• Fitting Position: Rear Axle
• Overall Length [mm]: 1,170
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 1,065
• paired article number: 30569
• Weight [kg]: 0.12
• Manufacturer: ABS

• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Number of pins: 3
• Connector Shape: oval
• for OE number: YDB500300PMA
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Fabrication Number: EFP-CT-004
• Manufacturer: NTY
• Name: NTY EFP-CT-004

• Installatsiooni pool: kahepoolne
• Anduritüüp: Ultraheliandur
• Pistikkontaktide arv: 3
• OE-numbri jaoks: YDB500311PMA
• keem.omadus: värvitav
• Pikkus (mm): 75
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Construction Year from: 11.2004
• Vehicle Identification Number (VIN) from: 5A342950
• Vehicle Identification Number (VIN) to: 5A342949
• Fitting Position: Rear, Front
• Colour: black
• Number of pins: 3
• Shape: angled
• Chemical Properties: Paintable
• Manufacturer: FAE ELEKTRYKA

• Vehicle Identification Number (VIN) from: 6A351057
• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Manufacturer: ERA

• Number of pins: 3
• Fabrication Number: EFP-LR-000
• Manufacturer: NTY
• Name: NTY EFP-LR-000

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Manufacturer: BREMI

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Number of pins: 3
• Shape: straight
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 09.2004
• Construction Year to: 08.2009
• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00466

• Guarantee: 3 years guarantee
• Frequency Range [MHz]: 433
• Programmed:
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 09.2004
• Construction Year to: 08.2009
• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• Construction Year from: 09.2004
• Construction Year to: 08.2009
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00468

• Construction Year from: 09.2004
• Construction Year to: 08.2009
• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Manufacturer: BOSCH
• Name: BS F026C00469

• Construction Year from: 09.2004
• Construction Year to: 08.2009
• Supplementary Article/Info 2: with cable
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaablipikkus (mm): 1 030
• Pistikkontaktide arv: 2
• Installatsiooni sügavus (mm): 28
• Manufacturer: ERA

• Required quantity: 4
• Fitting Position: both sides, Rear
• Number of pins: 3
• Chemical Properties: Over-paintable
• Mounting Type: Plugged
• Socket colour: black
• Shaft form: round
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141731
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF

• Required quantity: 2
• Fitting Position: both sides, outer, Front
• Number of pins: 3
• Socket colour: black
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Shape: angled
• Shaft form: round
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141641
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 1209109
• Manufacturer: KAMOKA

• for OE number: PMM500080
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: Titanium
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF

• Fitting Position: Rear
• Vehicle Identification Number (VIN) from: 5A342950
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Colour: black
• Manufacturer: METZGER

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV592

• Construction Year from: 09.2004
• Construction Year to: 08.2009
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Pistikkontaktide arv: 3
• Kütusesüsteemi seadmed: Common Rail
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: silver
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF
• Additional information: UVS4050
• Lisainfo: UVS4050

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Name: Rattaandur, rehvirohu kontrollssteem
• Manufacturer: HUF

• Construction Year from: 11.2004
• Construction Year to: 06.2009
• Engine Code: 276DT
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: koos kaabliga
• Manufacturer: VALEO

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Colour: Orange
• Vehicle Equipment: for vehicles with tyre-pressure monitoring system
• Frequency Range [MHz]: 433
• Valve colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF

• Fabrication Number: EPP-LR-000
• Manufacturer: NTY
• Name: NTY EPP-LR-000

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.36
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fabrication Number: EGT-LR-001
• Fitting Position: Particulate Filter
• Cable Length [mm]: 160
• Manufacturer: NTY

• Construction Year from: 09.2004
• Construction Year to: 08.2009
• Cable Length [mm]: 95
• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Manufacturer: FAE

• Required quantity: 2
• Fitting Position: outer, both sides, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 42
• Width [mm]: 23.15
• Height [mm]: 46
• Number of pins: 3
• Diameter [mm]: 16.6
• Name: Sensor, parkimisabi
• Manufacturer: VAL

• for OE number: PHF500101
• Manufacturer: MEAT&DORIA

• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO
• Name: HU 138253

• Engine Code: 276DT(TDV6)
• Vehicle Identification Number (VIN) from: (V)5A333224
• Vehicle Identification Number (VIN) to: (V)6A499999
• Colour: black
• Number of pins: 4
• Name: Ohumassimootja
• Manufacturer: VDO

• Quantity: 1
• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI ELEKTRONIKA

• Number of pins: 4
• Inlet Ø [mm]: 90
• Outlet Ø [mm]: 90
• Manufacturer: ERA