• for OE number: 9675342080
• Spanner Size: 19
• Housing Colour: grey
• Manufacturer: KAMOKA

• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER
• Additional information: WS3038 VERNET
• Lisainfo: WS3038 VERNET

• for OE number: 55187973, 1920 JH, 4M5G 12K073 AB, 93183528
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-CH-005
• Manufacturer: NTY

• Number of pins: 2
• Socket colour: grey
• Spanner Size: 19
• for OE number: 1484876
• Manufacturer: MEAT & DORIA

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Corresponds to the original part in colour: grey
• Fabrication Number: ECT-LR-000
• Manufacturer: NTY
• Name: NTY ECT-LR-000

• Spanner Size: 19
• Number of pins: 2
• Socket colour: grey
• Manufacturer: FAST

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 3L8A12A648BA
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• OE-numbri jaoks: 1 109 340
• Pikkus (mm): 58
• Garantii: 3 aastat garantii
• Pistikkontaktide arv: 2
• Pinge [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with retaining spring
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: CZW-LR-011
• Manufacturer: NTY

• Pistikukatte kuju: ristkülik
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: S19
• Name: NI 207048
• Manufacturer: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: 448DT(DITC)
• Spanner Size: 19
• for article number: 1.879.948, 1.879.949, 1.879.950
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: EP 1.830.285
• Lisainfo: EP 1.830.285

• Engine Code: 448DT(DITC)
• Spanner Size: 19
• for article number: 7.7948, 7.7949, 7.7950
• Manufacturer: FACET

• Number of pins: 2
• Housing Colour: black
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV646
• Manufacturer: ESEN SKV

• Fitting Position: both sides, Rear, inner, Front, outer, Centre
• Fabrication Number: EPDC-LR-002
• Manufacturer: NTY

• Fitting Position: Front
• Fabrication Number: EPDC-LR-007
• Manufacturer: NTY

• Fitting Position: both sides, Front, Rear, inner
• Fabrication Number: EPDC-LR-003
• Manufacturer: NTY

Manufacturer: NRF KLIMATYZACJA

• Fitting Position: Front
• Colour: black
• Shape: straight
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pistikukatte kuju: ristkülik
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Name: NI 207010
• Manufacturer: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: 448DT(DITC)
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• Fitting Position: Front
• Colour: grey
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV229

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• for OE number: LR038084
• Colour: black
• Shape: angled
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Shape: straight
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Number of connectors: 3
• Chemical Properties: Paintable
• Quality class: PJ
• Name: Parking sensor

• Colour: grey
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Corresponds to the original part in colour: grey
• Mounting Type: Bracket mounting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009309781

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: grey
• Manufacturer: FAE

• Fitting Position: Front
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Name: ANDUR, KšTUSETEMPERATUUR
• Manufacturer: BOS

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• for OE number: 1826557
• Manufacturer: MEAT&DORIA

Manufacturer: FAST

• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: straight
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV057

• Height [mm]: 24.2
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET
• Additional information: CS0336 VERNET
• Lisainfo: CS0336 VERNET

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-LR-022
• Manufacturer: NTY

• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: MM SDP045
• Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. OPEL AGILA 1,0 03-
• Manufacturer: BRM

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 24.1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Vehicle Identification Number (VIN) from: 6A000001
• Colour: grey
• Fitting Position: Rear, Front
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Colour: black
• Material: Plastic
• Number of pins: 2
• Number of connectors: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Fitting Position: Right, Left
• Fitting Depth [mm]: 24.1
• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 12
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Colour: black
• Name: SN CMP158.02
• Manufacturer: SNR

• Fabrication Number: EZC-FR-205
• Manufacturer: NTY
• Name: NTY EZC-FR-205

• Guarantee: 5 years guarantee
• Number of pins: 3
• Sensor Type: Hall Sensor
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Manufacturer: NRF

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 55
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358381091
• Manufacturer: HELLA

• Required quantity: 4
• Fitting Position: Front
• Chemical Properties: Over-paintable
• Colour: black
• Number of pins: 3
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Manufacturer: MEY

Name: CZUJNIK PARKOWANIA LAND ROVER RANGE ROVER III, FREELANDER 02-

• Fabrication Number: ECS-LR-000
• Manufacturer: NTY

• Construction Year from: 09.2010
• Number of pins: 2
• Connector Shape: oval
• Socket colour: green
• Thread Size: M12x1,5 mm
• Spanner Size: 19 mm
• Fitting Position: High Pressure Pump (low pressure side)
• for OE number: 31272619
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Fitting Depth [mm]: 24
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Engine Code: 448DT(DITC)
• Manufacturer: FACET

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11212

• Required quantity: 2
• Number of pins: 2
• Cable Length [mm]: 690
• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358218251

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 2
• Number of pins: 2
• Cable Length [mm]: 850
• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU358218261
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 448DT(DITC)
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Fitting Position: both sides, Rear
• Required quantity: 4
• Supplementary Article/Supplementary Info: with gaskets/seals
• Diameter [mm]: 15.35
• Chemical Properties: Paintable
• Name: Sensor, parkimisabi
• Manufacturer: TRI

• Length [mm]: 51.6
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Installatsiooni pool: kahepoolne
• Anduritüüp: Ultraheliandur
• Pistikkontaktide arv: 3
• OE-numbri jaoks: YDB100070
• keem.omadus: värvitav
• Pikkus (mm): 75
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Length [mm]: 52
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Corresponds to the original part in colour: anthracite
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009163921

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: MAGNETI MARELLI

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front Axle
• Overall Length [mm]: 990
• Length [mm]: 25
• Sensor Type: Active sensor
• Socket colour: green
• Cable Length [mm]: 880
• paired article number: 30920
• Weight [kg]: 0.12
• Manufacturer: ABS

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Number of pins: 3
• Shape: straight
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: Esisild
• Pikkus (mm): 900
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Pistiku värv: sinine
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV348

• Guarantee: 3 years guarantee
• Frequency Range [MHz]: 433
• Programmed:
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Rear, Front
• Number of pins: 3
• Shape: angled
• Chemical Properties: Paintable
• Manufacturer: FAE ELEKTRYKA

• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Guarantee: 3 years guarantee
• Frequency Range [MHz]: 433
• Programmed:
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Kontrolltähistus: CE
• Tunnustäht: 1210
• Väändejõud [Nm]: 0
• Montaaživiis: pistetud
• Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
• Piirangutega toode/piirangu info 2: koos kruviga, koos klappidega
• lubatud suurim kiirus (km/h): 210
• Korpusevärv: must/valge
• Sagedusala [MHz]: 433
• Klapisäärematerjal: Kumm vasest riide lisamisega
• Ventiili värv: must
• Name: SCH 1210-GO1
• Manufacturer: SCHRADER

• can be programmed:
• Colour: silver
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00466

• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Rubber
• Manufacturer: BOSCH
• Name: BS F026C00469

• can be programmed:
• Colour: Titanium
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00467
• Lisainfo: F026C00467 BOSCH
• Additional information: F026C00467 BOSCH

• can be programmed:
• Colour: black
• Frequency Range [MHz]: 433
• Material: Steel
• Manufacturer: BOSCH
• Name: BS F026C00468

Manufacturer: BOSCH

• Supplementary Article/Info 2: with cable
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for OE number: 55187973
• Manufacturer: MEAT&DORIA

• Sensor Type: Ultrasonic Sensor
• Colour: black
• Diameter [mm]: 15.5
• Number of pins: 3
• Connector Shape: oval
• for OE number: 1S0919275D
• Manufacturer: MEAT & DORIA

• Kontrolltähistus: CE
• Väändejõud [Nm]: 6
• Montaaživiis: kruvitud
• Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
• Piirangutega toode/piirangu info 2: T-kujulise soonega, koos klappidega
• lubatud suurim kiirus (km/h): 250
• Sagedusala [MHz]: 433
• Klapisäärematerjal: Alumiinium
• Ventiili värv: must
• Name: SCH 2200B-GO1
• Manufacturer: SCHRADER

• Kontrolltähistus: CE
• Väändejõud [Nm]: 6
• Montaaživiis: kruvitud
• Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
• Piirangutega toode/piirangu info 2: T-kujulise soonega, koos klappidega
• lubatud suurim kiirus (km/h): 250
• Sagedusala [MHz]: 433
• Klapisäärematerjal: Alumiinium
• Ventiili värv: hõbedane
• Name: SCH 2200-GO1
• Manufacturer: SCHRADER

• Kontrolltähistus: CE
• Väändejõud [Nm]: 6
• Montaaživiis: kruvitud
• Sõidukivarustus: Rehvirõhu kontrollsüsteemiga sõidukite jaoks
• Piirangutega toode/piirangu info 2: T-kujulise soonega, koos klappidega
• lubatud suurim kiirus (km/h): 250
• Korpusevärv: must/valge
• Sagedusala [MHz]: 433
• Klapisäärematerjal: Alumiinium
• Ventiili värv: titaan
• Name: SCH 2200T-GO1
• Manufacturer: SCHRADER

• Engine Code: 448DT
• for OE number: 1 319 158
• Colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24.3
• Supplementary Article/Info 2: without cable, with seal ring
• Connector Shape: oval
• Resistor [kOhm]: 320
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Shape: angled
• Chemical Properties: Paintable
• Manufacturer: METZGER

• Weight [kg]: 0.05
• Test Mark: CE, FCC, IC
• Frequency Range [MHz]: 433
• Valve colour: silver
• Housing Colour: black
• Mounting Type: Bolted
• Installation Information: TPMS sensor needs to be programmed before use.
• Manufacturer: HUF