Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle,
Wheel Side - Height [mm]: 156
- Joint Type: Universal Joint
- Supplementary Article/Info 2: with clamps
- Inner Diameter 1 [mm]: 23
- Inner Diameter 2 [mm]: 112
-
Name: KAITSEKUMMIKOMPLEKT,
VEOVOLL - Manufacturer: SKF
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 81
- Height [mm]: 130
- Version: UNIVERSAL BOOT KIT
-
Name: KAITSEKUMMIKOMPLEKT,
VEOVOLL - Manufacturer: AUT
- Additional information: D8000E
- Lisainfo: D8000E
- Fitting Position: Front Axle
- Outer Diameter [mm]: 30
- for shaft diameter [mm]: 103
- Supplementary Article/Info 2: with clamps
-
Fabrication Number: NOP-
073 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Wheel Side
- Length [mm]: 139
-
Material: NBR
(nitrile butadiene rubber) - Joint Type: CV Joint
- Inner Diameter 1 [mm]: 30
- Inner Diameter 2 [mm]: 104
- Manufacturer: FEBEST
-
Additional information: FST2517-
BOX3 -
Lisainfo: FST2517-
BOX3
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 [mm]: 23
- Inner Diameter 2 [mm]: 116
- Height [mm]: 136
- Name: SN OBK10.002
- Manufacturer: SNR
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 72
- Height [mm]: 97
- Name: SN OBK10.005
- Manufacturer: SNR
-
Fitting Position: Wheel Side,
Front Axle - Inner Diameter 1 from [mm]: 22
- Inner Diameter 1 to [mm]: 29
- Inner Diameter 2 from [mm]: 72
- Inner Diameter 2 to [mm]: 84
- Height [mm]: 97
- Material: Rubber
- Joint Type: Universal Joint
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 72
-
Name: KAITSEKUMMIKOMPLEKT,
VEOVOLL - Manufacturer: SKF
- Fitting Position: transmission sided
- Inner Diameter 1 [mm]: 48
- Inner Diameter 2 [mm]: 104
- Height [mm]: 124
-
Name: KAITSEKUMMIKOMPLEKT,
VEOVOLL - Manufacturer: AUT
- Fitting Position: Wheel Side
- Length [mm]: 106
- Material: PVC
- Inner Diameter 1 [mm]: 31
- Inner Diameter 2 [mm]: 104
- Manufacturer: FEBEST
- Construction Year to: 08.2009
- Vehicle Identification Number (VIN) from: 7A000001
-
Bellows Material: TPE
(thermoplastic elastomer) - Quantity Unit: Kit
- New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
Fitting Position: Wheel Side, transmission sided, Rear Axle Left, Rear Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Construction Year to: 08.2009
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 [mm]: 34
- Inner Diameter 2 [mm]: 103
- Height [mm]: 126
-
Bellows Material: TPE
(thermoplastic elastomer) - New Part:
- Supplementary Article/Supplementary Info: with grease
-
Name: Kaitsekummikomplekt,
veovoll - Manufacturer: GKN
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Fitting Position: transmission sided
- Length [mm]: 122
- Material: PVC
- Inner Diameter 1 [mm]: 104
- Inner Diameter 2 [mm]: 48
- Manufacturer: FEBEST
- Fitting Position: transmission sided
- Length [mm]: 110
- Material: PVC
- Inner Diameter 1 [mm]: 34
- Inner Diameter 2 [mm]: 78
- Manufacturer: FEBEST
- Construction Year to: 08.2009
- Inner Diameter 1 [mm]: 34
- Inner Diameter 2 [mm]: 103
- Height [mm]: 126
-
Bellows Material: TPE
(thermoplastic elastomer) - Quantity Unit: Kit
- New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
Fitting Position: Wheel Side, transmission sided, Front Axle Left, Front Axle Right Installation Information: Changing the wheel-side boot can only be done via the gearbox side! General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Construction Year to: 08.2009
- Inner Diameter 1 [mm]: 34
- Inner Diameter 2 [mm]: 126
- Height [mm]: 103
-
Bellows Material: TPE
(thermoplastic elastomer) - Quantity Unit: Kit
- New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
Fitting Position: Wheel Side, transmission sided, Rear Axle Left, Rear Axle Right Installation Information: Changing the wheel-side boot can only be done via the gearbox side! General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks