Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 100
- Thickness [mm]: 1.3
- Weight [kg]: 0.002
- Shape: A Shape
- Material: Copper
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 16.7
- DIN/ISO: 7603
- Manufacturer: METALCAUCHO
- Quantity per packing unit: 25
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- Thickness [mm]: 1.5
- Material: Copper
- Shape: A Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.736,
505.550, 505.540 - Manufacturer: ELRING
- Additional information: 110.906 ELRING
- Lisainfo: 110.906 ELRING
- Quantity per packing unit: 4
- Length [mm]: 12
- Weight [kg]: 0.02
-
Thread Size: M12 x 1,
5 - Weight [g]: 20
- Manufacturer: METALCAUCHO
Manufacturer: DR MOTOR
- Quantity per packing unit: 10
- for OE number: 002 997 3430
-
Thread Size: M12 x 1,
5 - Manufacturer: TRUCKTEC
- Quantity per packing unit: 25
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Material: Copper
- Inner Diameter [mm]: 14
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Outer Diameter [mm]: 17
- Inner Diameter [mm]: 12.3
- Thickness [mm]: 1.5
- Material: Aluminium
- Shape: round
- Packing Type: Blister Pack
- Manufacturer: CORTECO
- for OE number: 002 997 3430 cpl.1
-
Thread Size: M12 x 1,
5 - Manufacturer: TRUCKTEC
- Material: Steel
- Length [mm]: 35
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
-
Thread Size: M14 x 1,
75 - for OE number: 1013938
- Manufacturer: DELLO AUTOMEGA
- Quantity per packing unit: 10
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Alternatively:
- Name: Rongastihend
- Manufacturer: FIS
- Length [mm]: 13
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 8
- Spanner Size: 17
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 10
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 13
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 8
- Spanner Size: 17
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 10
- Weight [kg]: 0.012
- Supplementary Article/Info 2: without seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Material: Steel,
Aluminium -
Thread Size: M12x1,
75 - Length [mm]: 21
- Screw length below head [mm]: 12
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 13
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Seal Material: Copper
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- Thickness [mm]: 1.5
- Packing Type: Bag
- Manufacturer: METZGER
- Length [mm]: 13
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 8
- Spanner Size: 17
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 10
- Weight [kg]: 0.016
- Supplementary Article/Info 2: with seal ring
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 21
-
Thread Size: M 12 x 1,
50 x 12 - Packing Type: Blister Pack
- Spanner Size: 13
- Supplementary Article/Info 2: with seal ring
- Manufacturer: CORTECO
- Name: COU 220118S
- Length [mm]: 13
- Outer Diameter [mm]: 17
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 8
- Spanner Size: 17
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 10
- Weight [kg]: 0.016
- Supplementary Article/Info 2: with seal ring
- Name: SW 20 93 0968
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 35
- Outer Diameter [mm]: 28
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 12
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 20
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: ENERGY
- Length [mm]: 35
- Outer Diameter [mm]: 28
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 12
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 21
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Observe service information:
-
Name: SULGURKRUVI,
OLIVANN - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 35
- Outer Diameter [mm]: 28
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 12
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 20
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 35
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 12
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 21
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 34.5
- Outer Diameter [mm]: 28
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 12
- Quality/ Grade: 5.8
- Spanner Size: 13
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 20
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Name: SW 50 92 1096
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 13
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 8
- Spanner Size: 17
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 10
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 100
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 17
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Manufacturer: FA1 FISCHER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks