• Spring Type: for vehicles with air suspension
• Voltage [V]: 12
• Capacity at 12V: 70A
• Combi Switch Function: Normally Open Contact
• Colour: black
• Number of pins: 4
• Wiring Diagramme: S2
• Supplementary Article/Info 2: with resistor
• Protection Type (IP Code): IP54
• Inductive Load [A]: 35
• Capacitive Load [A]: 30
• Ohmic Load [A]: 40
• Plug Type ID: B
• Supplementary Article/Supplementary Info: without holder
• for OE number: 13171831
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 4RA933332531

Relay function: Pre-glow device, Heated windscreen, Heated rear window, Fan, heater/air conditioning, Comfort Equipment Variant (trim package), engine cooling, Clamp 15, ESP, Clamp 15R, Secondary Air System, Air Suspension, Engine control unit, Hydraulic Unit, Clamp 87, Starter, ABS, ABS recovery pump Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Valve Type: Control Valve
• Fabrication Number: ZPZ-LR-008
• Manufacturer: NTY

• Fitting Position: Rear, both sides
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 131-02-114

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Identification Number (VIN) from: 6A000001
• Fitting Position: Left Rear
• Valve Type: Multiport Valve
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of connectors: 4
• Supplementary Article/Info 2: with retaining ring
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.32
• Number of pins: 2
• Manufacturer: SKV GERMANY

• Vehicle Identification Number (VIN) from: 6A000001
• Valve Type: Multiport Valve
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of connectors: 3
• Supplementary Article/Info 2: with retaining ring
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.56
• Number of pins: 6
• Manufacturer: SKV GERMANY

• Fitting Position: Rear Axle
• Spring Design: Air Spring
• Manufacturer: KAMOKA

• Spring Type: for vehicles with air suspension
• Fitting Position: Rear Axle
• Spring Design: Air Spring
• Name: Ohkvedru,vedrustus
• Manufacturer: MAX

Suspension: for vehicles with electronic suspension control, for vehicles without electronic suspension control

• Fitting Position: Rear Axle
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Spring Type: for vehicles with air suspension
• Manufacturer: OYODO

• Klapitüüp: Magnetklapp
• Vedrustustüüp: õhkvedrustusega sõidukile
• Installatsiooni pool: ees
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Spring Design: Air Spring
• Guarantee: 3 years guarantee
• Weight [kg]: 2.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 58SKV013

• Fitting Position: Front Axle, Right
• Guarantee: 3 years guarantee
• paired article number: 58SKV087
• Weight [kg]: 5.4
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Left Front
• Shock Absorber Mounting Type: Top yoke, Bottom Yoke
• Spring Type: for vehicles with air suspension
• Manufacturer: KAMOKA

• Fitting Position: Right Front
• Shock Absorber Mounting Type: Top yoke, Bottom Yoke
• Spring Type: for vehicles with air suspension
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Left
• Guarantee: 3 years guarantee
• paired article number: 58SKV086
• Weight [kg]: 5.4
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Spring Type: for vehicles with air suspension
• Used part return not required:
• New part without deposit:
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 131-02-619

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Spring Type: for vehicles with air suspension
• Suspension: for vehicles without electronic suspension control
• Construction Year to: 12.2005
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Manufacturer: DENCKERMANN FILTRY

• Spring Type: for vehicles with air suspension
• Suspension: for vehicles without electronic suspension control
• Construction Year to: 12.2005
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Manufacturer: DENCKERMANN FILTRY

• Construction Year from: 01.2010
• Fitting Position: Front Axle Left
• paired article number: 35200811
• Manufacturer: GSP

• Construction Year from: 01.2010
• Fitting Position: Front Axle Right
• paired article number: 35200812
• Manufacturer: GSP

• Vehicle Identification Number (VIN) from: 6A000001
• Valve Type: Solenoid Valve
• Spring Type: for vehicles with air suspension
• Fitting Position: Right Rear
• paired article number: VB-3505
• Manufactured in: China
• Packaging length [cm]: 20.96
• Packaging width [cm]: 11.43
• Packaging height [cm]: 11.43
• Net weight [kg]: 0.318
• Weight [kg]: 0.454
• Manufacturer: ARNOTT

• Vehicle Identification Number (VIN) from: 6A000001
• Valve Type: Solenoid Valve
• Spring Type: for vehicles with air suspension
• Fitting Position: Front
• Manufactured in: China
• Packaging length [cm]: 20.96
• Packaging width [cm]: 11.43
• Packaging height [cm]: 11.43
• Net weight [kg]: 0.363
• Weight [kg]: 0.454
• Manufacturer: ARNOTT

• Fitting Position: Right Front
• Spring Type: for vehicles with air suspension
• Shock Absorber Mounting Type: Top yoke, Bottom Yoke
• replacement in pairs recommended:
• paired article number: A-2934
• Manufactured in: The Netherlands
• Packaging length [cm]: 47
• Packaging width [cm]: 19
• Packaging height [cm]: 18.5
• Net weight [kg]: 4.3
• Weight [kg]: 5.1
• Manufacturer: ARNOTT
• Lisainfo: 02-12 Land Rover Range Rover (L322)
• Additional information: 02-12 Land Rover Range Rover (L322)

• Fitting Position: Left Front
• Spring Type: for vehicles with air suspension
• Shock Absorber Mounting Type: Top yoke, Bottom Yoke
• replacement in pairs recommended:
• paired article number: A-2933
• Manufactured in: The Netherlands
• Packaging length [cm]: 47.5
• Packaging width [cm]: 18.5
• Packaging height [cm]: 19
• Net weight [kg]: 4.4
• Weight [kg]: 5.2
• Manufacturer: ARNOTT
• Lisainfo: 02-12 Land Rover Range Rover (L322)
• Additional information: 02-12 Land Rover Range Rover (L322)

• Fitting Position: Front Axle Right
• paired article number: 35200462
• Manufacturer: GSP

• Fitting Position: Front Axle Left
• paired article number: 35200461
• Manufacturer: GSP

• Fitting Position: Rear
• Spring Type: for vehicles with air suspension
• Shock Absorber Mounting Type: Top yoke, Bottom Pin
• replacement in pairs recommended:
• Manufactured in: USA
• Packaging length [cm]: 48
• Packaging width [cm]: 18.5
• Packaging height [cm]: 18.5
• Net weight [kg]: 2.3
• Weight [kg]: 2.7
• Manufacturer: ARNOTT
• Lisainfo: 02-12 Land Rover Range Rover -vasak või parem
• Additional information: 02-12 Land Rover Range Rover -vasak või parem

• Fitting Position: Rear Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber System: Monotube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Manufacturer: KAMOKA

• Spring Type: for vehicles with air suspension
• Supplementary Article/Info 2: with dryer
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 4
• Manufacturer: SKV GERMANY

• Construction Year to: 12.2005
• Spring Type: for vehicles with air suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 11-0807
• Name: Ohuamort
• Manufacturer: MAX

• Construction Year to: 12.2005
• Spring Type: for vehicles with air suspension
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 11-0806
• Name: Ohuamort
• Manufacturer: MAX

• Spring Type: for vehicles with air suspension
• Used part return not required:
• New part without deposit:
• for OE number: LR041777
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Spring Type: for vehicles with air suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 11-0805
• Name: Ohuamort
• Manufacturer: MAX

• Spring Type: for vehicles with air suspension
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 11-0804
• Name: Ohuamort
• Manufacturer: MAX

• Fitting Position: Left Front
• Shock Absorber Mounting Type: Top yoke, Bottom Fork
• Spring Type: for vehicles with air suspension
• Suspension: for vehicles without electronic suspension control
• Manufacturer: KAMOKA

• Spring Type: for vehicles with air suspension
• Suspension: for vehicles without electronic suspension control
• Construction Year from: 01.2006
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Manufacturer: DENCKERMANN AMORTYZATORY

• Spring Type: for vehicles with air suspension
• Suspension: for vehicles without electronic suspension control
• Construction Year from: 01.2006
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Manufacturer: DENCKERMANN AMORTYZATORY

• Vehicle Identification Number (VIN) to: 5A999999
• Spring Type: for vehicles with air suspension
• Supplementary Article/Info 2: with dryer
• Manufacturer: JPA

Name: KOMPRESOR ZAWIESZENIA PNEUMATYCZNEGO LAND ROVER RANGE ROVER III 3,0-4,4 02-12

• Spring Type: for vehicles with air suspension
• Supplementary Article/Info 2: with dryer
• Manufacturer: JPA

Name: KOMPRESOR ZAWIESZENIA PNEUMATYCZNEGO LAND ROVER RANGE ROVER III 3,0-5,0 02-12

• Fitting Position: Front Axle Right
• paired article number: 30900462
• Manufacturer: GSP

• Fitting Position: Front Axle Left
• paired article number: 30900461
• Manufacturer: GSP

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) to: 6A999999
• Fitting Position: Front Axle, Right
• Guarantee: 3 years guarantee
• New Part:
• paired article number: 58SKV709
• Weight [kg]: 14
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Vehicle Identification Number (VIN) to: 6A999999
• Fitting Position: Front Axle, Left
• Guarantee: 3 years guarantee
• New Part:
• paired article number: 58SKV710
• Weight [kg]: 14
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 01.2006
• Spring Type: for vehicles with air suspension
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 11-0755
• Name: Amort
• Manufacturer: MAX

• Construction Year from: 01.2006
• Spring Type: for vehicles with air suspension
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 11-0756
• Name: Ohuamort
• Manufacturer: MAX

• Pinge [V]: 12
• Vedrustustüüp: õhkvedrustusega sõidukile
• OE-numbri jaoks: LR072537
• Name: Kompressor,suruohussteem
• Manufacturer: MD

• for manufacturer number: 2077036
• Manufacturer: KAMOKA

• Fitting Position: Right Front
• Spring Type: for vehicles with air suspension
• Manufacturer: KAMOKA

• Pinge [V]: 12
• Vedrustustüüp: õhkvedrustusega sõidukile
• OE-numbri jaoks: RQL000014
• Name: Kompressor,suruohussteem
• Manufacturer: MD

Manufacturer: KAMOKA

• Fitting Position: Right Front
• Shock Absorber Mounting Type: Top yoke, Bottom Fork
• Spring Type: for vehicles with air suspension
• Suspension: for vehicles without electronic suspension control
• Manufacturer: KAMOKA

• Fitting Position: Left Front
• Shock Absorber Mounting Type: Top yoke, Bottom Fork
• Braking/Driving Dynamics: for vehicles with Variable Damping System (VDS)
• Spring Type: for vehicles with air suspension
• Suspension: for vehicles with electronic suspension control
• Manufacturer: KAMOKA

• Fitting Position: Right Front
• Shock Absorber Mounting Type: Top yoke, Bottom Yoke
• Braking/Driving Dynamics: for vehicles with Variable Damping System (VDS)
• Spring Type: for vehicles with air suspension
• Suspension: for vehicles with electronic suspension control
• Manufacturer: KAMOKA

• for manufacturer number: 2077050
• Manufacturer: KAMOKA

• for OE number: LR041777
• Name: Kompressor,suruohussteem
• Manufacturer: TRU

• Fitting Position: Right Front
• Suspension: for vehicles without electronic suspension control
• Spring Type: for vehicles with air suspension
• Shock Absorber Mounting Type: Top yoke, Bottom Fork
• replacement in pairs recommended:
• paired article number: AS-2962
• Manufactured in: USA
• Packaging length [cm]: 84
• Packaging height [cm]: 24
• Packaging width [cm]: 22
• Net weight [kg]: 12.5
• Weight [kg]: 14.4
• Manufacturer: ARNOTT
• Lisainfo: 02-12 Land Rover Range Rover (L322)
• Additional information: 02-12 Land Rover Range Rover (L322)

• Fitting Position: Left Front
• Suspension: for vehicles without electronic suspension control
• Spring Type: for vehicles with air suspension
• Shock Absorber Mounting Type: Top yoke, Bottom Fork
• replacement in pairs recommended:
• paired article number: AS-2961
• Manufactured in: USA
• Packaging length [cm]: 82
• Packaging height [cm]: 22
• Packaging width [cm]: 22
• Net weight [kg]: 12.4
• Weight [kg]: 14.3
• Manufacturer: ARNOTT
• Lisainfo: 02-12 Land Rover Range Rover (L322)
• Additional information: 02-12 Land Rover Range Rover (L322)

• Fitting Position: Right Front
• Spring Type: for vehicles with air suspension
• Manufactured in: USA
• Packaging length [cm]: 22
• Packaging height [cm]: 23
• Packaging width [cm]: 83
• Weight [kg]: 14.1

• Fitting Position: Left Front
• Spring Type: for vehicles with air suspension
• Used part return required:
• Generally overhauled:
• Manufactured in: USA
• Packaging length [cm]: 82
• Packaging height [cm]: 21
• Packaging width [cm]: 23
• Weight [kg]: 14
• Lisainfo: 02-12 Land Rover Range Rover (L322)
• Additional information: 02-12 Land Rover Range Rover (L322)

• Fitting Position: Right Front
• Spring Type: for vehicles with air suspension
• Used part return required:
• Generally overhauled:
• Manufactured in: USA
• Packaging length [cm]: 64
• Packaging height [cm]: 21
• Packaging width [cm]: 18.5
• Weight [kg]: 14

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Manufacturer: KAMOKA

• Fitting Position: Right Front
• Suspension: for vehicles without electronic suspension control
• Spring Type: for vehicles with air suspension
• Used part return required:
• Generally overhauled:
• Manufactured in: USA
• Packaging length [cm]: 25
• Packaging height [cm]: 22
• Packaging width [cm]: 83
• Weight [kg]: 15.4
• Lisainfo: 05-09 Land Rover Range Rover (Supercharged)
• Additional information: 05-09 Land Rover Range Rover (Supercharged)

• Fitting Position: Left Front
• Suspension: for vehicles without electronic suspension control
• Spring Type: for vehicles with air suspension
• Generally overhauled:
• Manufactured in: USA
• Packaging length [cm]: 25
• Packaging height [cm]: 22
• Packaging width [cm]: 83
• Weight [kg]: 15.4
• Lisainfo: 05-09 Land Rover Range Rover (Supercharged)
• Additional information: 05-09 Land Rover Range Rover (Supercharged)

• Construction Year from: 01.2010
• Fitting Position: Front Axle Right
• paired article number: 30900812
• Manufacturer: GSP

• Construction Year from: 01.2010
• Fitting Position: Front Axle Left
• paired article number: 30900811
• Manufacturer: GSP

• Fitting Position: Front Axle Right
• Manufacturer: METALCAUCHO

• Spring Type: for vehicles with air suspension
• Supplementary Article/Supplementary Info: Relay replacement necessary, without relay
• Manufactured in: Germany
• Packaging length [cm]: 35
• Packaging width [cm]: 34.5
• Packaging height [cm]: 19.5
• Net weight [kg]: 5.4
• Weight [kg]: 5.7

• for OE number: LR006201
• Spring Type: for vehicles with air suspension
• Supplementary Article/Info 2: with dryer, with integrated relay
• Supplementary Article/Supplementary Info: Relay replacement necessary
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• See accessories list for additionally required parts:
• Article number of recommended accessories: at14319, at14320, at14171, at14172
• Article number of the recommended special tool: at14132
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Construction Year to: 12.2005
• Spring Type: for vehicles with air suspension
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• paired article number: 45-260230
• Manufacturer: BILSTEIN

• Spring Type: for vehicles with air suspension
• Supplementary Article/Supplementary Info: Relay replacement necessary, with relay
• Supplementary Article/Info 2: with dryer
• Manufactured in: China
• Packaging length [cm]: 20
• Packaging width [cm]: 35
• Packaging height [cm]: 35
• Net weight [kg]: 5.3
• Weight [kg]: 5.6
• Manufacturer: ARNOTT

• Construction Year from: 01.2010
• Fitting Position: Left Front
• Suspension: for vehicles with electronic suspension control
• Spring Type: for vehicles with air suspension
• Braking/Driving Dynamics: for vehicles with Variable Damping System (VDS)
• Shock Absorber Mounting Type: Top yoke, Bottom Fork
• Used part return required:
• Generally overhauled:
• replacement in pairs recommended:
• paired article number: AS-2757
• Manufactured in: USA
• Packaging length [cm]: 83
• Packaging height [cm]: 24
• Packaging width [cm]: 22
• Net weight [kg]: 12.4
• Weight [kg]: 14.3

Lisainfo: 10-12 Land Rover Range Rover w/Variable Damping Suspension Additional information: 10-12 Land Rover Range Rover w/Variable Damping Suspension

• Construction Year from: 01.2010
• Fitting Position: Right Front
• Suspension: for vehicles with electronic suspension control
• Spring Type: for vehicles with air suspension
• Braking/Driving Dynamics: for vehicles with Variable Damping System (VDS)
• Shock Absorber Mounting Type: Top yoke, Bottom Fork
• Used part return required:
• Generally overhauled:
• replacement in pairs recommended:
• paired article number: AS-2758
• Manufactured in: USA
• Packaging length [cm]: 83
• Packaging height [cm]: 24
• Packaging width [cm]: 22
• Net weight [kg]: 12.6
• Weight [kg]: 14.5

Lisainfo: 10-12 Land Rover Range Rover w/Variable Damping Suspension Additional information: 10-12 Land Rover Range Rover w/Variable Damping Suspension

• Vehicle Identification Number (VIN) to: 5A999999
• Spring Type: for vehicles with air suspension
• Supplementary Article/Supplementary Info: Relay replacement necessary, with relay
• Supplementary Article/Info 2: with dryer
• Manufactured in: Germany
• Packaging length [cm]: 30
• Packaging width [cm]: 19
• Packaging height [cm]: 22
• Net weight [kg]: 4.4
• Weight [kg]: 4.7
• Lisainfo: 02-05 Land Rover Range Rover (L322)
• Additional information: 02-05 Land Rover Range Rover (L322)