Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 12
-
Oil manufacturer recommendation: MIL-
L- 2105 C/ D, API GL- 5, GL- 5 - Transmission Type: for manual transmission
- Length [mm]: 60
- Colour: yellow
- Width [mm]: 115
- Capacity [litre]: 1
- Height [mm]: 225
- Chemical Properties: Contains mineral oil
- Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
-
Recommended change interval [km]: 80,
000 - Packing Type: Bottle
-
Article number of the recommended special tool: V99-
1017 - Observe service information:
-
SAE viscosity class: 80W-
90 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Number: PG1 5/
1 - Fill quantity [l]: 2
- Oil: Full Synthetic Oil
- SAE viscosity class: 75W
Specification: VW G 052 171, VW G 052 512, MB 235.73, Ford WSS-M2C200-D2, VW G 055 512, MIL-L-2105, VW G 052 178, API GL-4, VW G 052 726
-
API specification: GL-
4 - Capacity [litre]: 1
-
SAE viscosity class: 75W-
80 - Weight [kg]: 0.85
- Observe service information:
-
Manufacturer: FEBI-
OLEJE
Specification: BMW MTF LT-3, Fiat 9.55550-MX3, Fiat 9.55550-MZ1, Ford M2C200-C, JWS 227, LAND ROVER MTF-94, NISSAN MT-XZ TYP TL, NISSAN MT-XZ TYP JR, NISSAN MT-XZ, PSA B71 2330, Volvo 97308, VW 501 50, Ford M2C200-C2, Ford M2C200-C3 General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 12
-
Oil manufacturer recommendation: MIL-
L- 2105 E, G 052 145 S2, 235.8 - Packing Type: Bottle
- Length [mm]: 60
- Transmission Type: for manual transmission
- Colour: yellow
- Height [mm]: 225
- Capacity [litre]: 1
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Observe the vehicle manufacturer specifications:
- Observe system fill quantity:
- Oil: Full Synthetic Oil
- Observe service information:
- Width [mm]: 115
- Quantity Unit: Box
-
API specification: GL-
4, GL- 5, MT- 1 -
SAE viscosity class: 75W-
90 - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
API specification: GL-
4, MT- 1, GL- 5 -
Oil manufacturer recommendation: MIL-
L- 2105 E - Height [mm]: 230
- Transmission Type: for manual transmission
- Colour: yellow
- Capacity [litre]: 5
-
Article number of the recommended special tool: V99-
1017 - Recommended change interval [years]: 5
-
Recommended change interval [km]: 80,
000 - Observe system fill quantity:
- Observe the vehicle manufacturer specifications:
- Packing Type: Canister
- Width [mm]: 115
- Oil: Full Synthetic Oil
-
SAE viscosity class: 75W-
90 - Observe service information:
- Length [mm]: 300
- Quantity Unit: Box
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Number: PG1 5/
1 - Fill quantity [l]: 2
- Oil: Full Synthetic Oil
-
SAE viscosity class: 75W-
80
Specification: ZF TE-ML 08, ZF TE-ML 13, Volvo 97307, ZF TE-ML 02L, ZF TE-ML 16K, MAN 341 Type Z4, Renault (Note Techni, API GL-4, Eaton Europe (300, DAF, MAN 341 Typ E3, Volvo 97305, 000 km or 3 years), IVECO, DTFR 13B150 (MB 235., ZF TE-ML 01L
-
Transmission Number: PG1 5/
1 - Fill quantity [l]: 2
- Oil: Full Synthetic Oil
-
SAE viscosity class: 75W-
80
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks