• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-LR-004
• Manufacturer: NTY
• Name: NTY HCA-LR-004

• Vehicle Identification Number (VIN) from: 1A000001
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-LR-003
• Manufacturer: NTY
• Name: NTY HCA-LR-003

• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 130
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Fabrication Number: HCA-LR-012
• Manufacturer: NTY
• Name: NTY HCA-LR-012

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-LR-011
• Name: NTY HCA-LR-011
• Manufacturer: NTY

• Voltage [V]: 12
• Capacity at 12V: 70A
• Combi Switch Function: Normally Open Contact
• Colour: black
• Number of pins: 4
• Wiring Diagramme: S2
• Supplementary Article/Info 2: with resistor
• Protection Type (IP Code): IP54
• Inductive Load [A]: 35
• Capacitive Load [A]: 30
• Ohmic Load [A]: 40
• Plug Type ID: B
• Supplementary Article/Supplementary Info: without holder
• for OE number: 13171831
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 4RA933332531

Relay function: Pre-glow device, Heated windscreen, Heated rear window, Fan, heater/air conditioning, Comfort Equipment Variant (trim package), engine cooling, Clamp 15, ESP, Clamp 15R, Secondary Air System, Air Suspension, Engine control unit, Hydraulic Unit, Clamp 87, Starter, ABS, ABS recovery pump Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle
• Width [mm]: 13.1
• Number of Teeth: 60
• Outer Diameter [mm]: 92
• Inner Diameter [mm]: 88
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 1,015
• Braking/Driving Dynamics: for vehicles with ABS
• Fabrication Number: HCA-LR-006
• Manufacturer: NTY
• Name: NTY HCA-LR-006

• Fitting Position: Front Axle
• Cable Length [mm]: 940
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Cable Length [mm]: 740
• Number of pins: 2
• Connector Shape: round
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Cable Length [mm]: 740
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Cable Length [mm]: 960
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Rear
• Manufacturer: ASHIKA

• Fitting Position: Rear
• Cable Length [mm]: 590
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Number of pins: 2
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 1A000001
• Vehicle Identification Number (VIN) to: 1A999999
• Fitting Position: Front Axle
• Colour: black
• Sensor Type: Passive sensor
• Length [mm]: 1,000
• Manufacturer: JPN

• Fitting Position: Front Axle
• Cable Length [mm]: 950
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Cable Length [mm]: 590
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Installatsiooni pool: Esisild
• Pikkus (mm): 930
• Piirangutega toode/piirangu info: koos lisadega
• Pistikkontaktide arv: 2
• Pistikute teostus: Male
• Pistikukatte kuju: ümar
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,12
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV132

• Fitting Position: Front Axle
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Front Axle
• Cable Length [mm]: 960
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Installatsiooni pool: Tagasild
• Pikkus (mm): 700
• Piirangutega toode/piirangu info: koos lisadega
• Pistikkontaktide arv: 2
• Pistikute teostus: Male
• Pistikukatte kuju: ümar
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,12
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Installatsiooni pool: Esisild
• Garantii: 3 aastat garantii
• Kaal (kg): 0,09
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV392

• Fitting Position: Rear
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Vehicle Identification Number (VIN) from: WA601203
• Vehicle Identification Number (VIN) to: YA999999
• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Installatsiooni pool: Tagasild
• Pikkus (mm): 730
• Piirangutega toode/piirangu info: koos lisadega
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Pistikukatte kuju: ümar
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,13
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV173

• Vehicle Identification Number (VIN) from: *********2A000001
• Length [mm]: 1,005
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 930
• Weight [kg]: 0.065
• Supplementary Article/Info 2: with screw
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Front
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Quantity: 2
• Vehicle Identification Number (VIN) from: 1A000001
• Vehicle Identification Number (VIN) to: 1A999999
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 736
• Name: Andur, rattap””rete arv
• Manufacturer: DLP

• Fitting Position: Rear Axle Left, Rear Axle Right, Front Axle
• Supplementary Article/Supplementary Info: with accessories
• Fabrication Number: HCA-LR-014
• Manufacturer: NTY
• Name: NTY HCA-LR-014

• Fitting Position: Rear Axle
• Quantity: 2
• Vehicle Identification Number (VIN) from: WA601203
• Vehicle Identification Number (VIN) to: YA999999
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 735
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20636

• Installatsiooni pool: Esisild
• Pikkus (mm): 930
• Piirangutega toode/piirangu info: koos lisadega
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Pistikukatte kuju: ümar
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,13
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV131

• Fitting Position: Front Axle
• Quantity: 2
• Vehicle Identification Number (VIN) from: 2a000001
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 940
• Name: Andur, rattap””rete arv
• Manufacturer: DLP

• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 1A000001
• Vehicle Identification Number (VIN) to: 1A999999
• Cable Length [mm]: 947
• Fitting Depth [mm]: 40.5
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front
• Cable Length [mm]: 960
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 2a000001
• Overall Length [mm]: 822
• Length [mm]: 30
• Sensor Type: Active sensor
• Socket colour: blue
• Cable Length [mm]: 712
• paired article number: 30823
• Weight [kg]: 0.12
• Manufacturer: ABS

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: WA601202, YA999999
• Block Separation:
• Vehicle Identification Number (VIN) from: WA601203
• Overall Length [mm]: 1,060
• Length [mm]: 41
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 956
• paired article number: 30630
• Weight [kg]: 0.16
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 1A000001
• Vehicle Identification Number (VIN) to: 1A999999
• Overall Length [mm]: 840
• Length [mm]: 40
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 738
• paired article number: 30632
• Weight [kg]: 0.07
• Manufacturer: ABS

• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: WA601203
• Vehicle Identification Number (VIN) to: YA999999
• Cable Length [mm]: 1,000
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle
• Quantity: 2
• Vehicle Identification Number (VIN) from: 1A000001
• Vehicle Identification Number (VIN) to: 1A999999
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 945
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20583

• Vehicle Identification Number (VIN) from: *********2A000001
• Length [mm]: 783
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.066
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Rear Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Front and Rear
• Inner Diameter [mm]: 88.3
• Width [mm]: 13.1
• Outer Diameter [mm]: 92.3
• Number of Teeth, ABS ring: 60
• Manufacturer: TRISCAN
• Lisainfo: 854017402
• Additional information: 854017402

• Vehicle Identification Number (VIN) from: 2A000001
• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Vehicle Identification Number (VIN) from: 2A000001
• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 2a000001
• Overall Length [mm]: 1,040
• Length [mm]: 30
• Sensor Type: Active sensor
• Socket colour: blue
• Cable Length [mm]: 930
• paired article number: 30760
• Weight [kg]: 0.11
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 2A000001
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 710
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20340

• Fitting Position: Rear Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 2a000001
• Cable Length [mm]: 712
• Fitting Depth [mm]: 30.3
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: YA999999
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 942
• Manufacturer: DELPHI
• Name: DE SS20370

• Fitting Position: Rear Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 1A000001
• Vehicle Identification Number (VIN) to: 1A999999
• Cable Length [mm]: 732
• Fitting Depth [mm]: 40.5
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear Axle
• Quantity: 2
• Vehicle Identification Number (VIN) to: WA601202
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 499
• Manufacturer: DELPHI ELEKTRONIKA

• Vehicle Identification Number (VIN) to: WA601202
• Required quantity: 2
• Installatsiooni pool: Tagasild
• Pikkus (mm): 7 780
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,31
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 06SKV237
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: WA601203
• Vehicle Identification Number (VIN) to: YA999999
• Cable Length [mm]: 783
• Fitting Depth [mm]: 41.5
• Number of pins: 2
• Resistance [Ohm]: 1,147
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: WA601202
• Overall Length [mm]: 5,800
• Sensor Type: Passive sensor
• paired article number: 30779
• Weight [kg]: 0.28
• Manufacturer: ABS

• Cable Length [mm]: 960
• Number of pins: 2
• Fitting Depth [mm]: 40
• Vehicle Identification Number (VIN) from: 1A 000001
• Vehicle Identification Number (VIN) to: 1A 999999
• Fitting Position: Front Axle Right, Front Axle Left
• for OE number: SSW100080
• Manufacturer: MEAT&DORIA