Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)


- Voltage [V]: 11
- Diameter [mm]: 6
- Length [mm]: 70
- Spanner Size: 12
-
Glow Plug Design: Metal glow plug,
Pencil- type Glow Plug - Fitting Depth [mm]: 24
- Manufacturer: KAMOKA



- Voltage [V]: 11
- Length [mm]: 73
- Manufacturer: FEBEST


- Number of circuits: 1
- Plug Type: Shrink Connector
-
Material: CuSn
(copper- tin) - Cable insulation material: Silicone
- Cable Length [mm]: 150
- Cable Cross Section [mm²]: 2.5
- Manufacturer: 3RG
- Additional information: RGI30204
- Lisainfo: RGI30204




























































- Engine Code: 11J
- Voltage [V]: 11
-
Thread Size: M12 x 1,
25 - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- Required quantity: 4
-
Thread Size: M12 x 1,
25 -
Glow Plug Design: Pencil-
type Glow Plug - Overall Length [mm]: 72
- Spanner Size: 12
- Connector type: M5
- Fitting Depth [mm]: 24.2
- Cone Pitch: 63°
- Rated Voltage [V]: 11
- Manufacturer: MEYLE
- Lisainfo: 0140201039
- Additional information: 0140201039


- Required quantity: 4
- Quantity per packing unit: 10
-
Glow Plug Design: Pencil-
type Glow Plug - Voltage [V]: 11
-
Thread Size: M12x1,
25 - Diameter [mm]: 6.1
- Fitting Depth [mm]: 24.3
- Connector type: M5
- Packing Type: Carton
- Spanner Size: 12 mm
-
Version: Double Coil Long,
Post Heating - Overall Length [mm]: 72
- Failure Moment [Nm]: 45
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 25
- Packaging length [cm]: 10
- Packaging width [cm]: 2.7
- Packaging height [cm]: 2.3
- Name: CH CH189
- Manufacturer: CHAMPION


- Engine Code: 12 J
- Connector type: M5
- Tightening torque to [Nm]: 22
- Current Strength [A]: 10
- Tightening torque from [Nm]: 15
- Tightening Torque [Nm]: 3
- Glow Plug Design: Metal glow plug
- Mounting Inclination: 63
- Voltage [V]: 11
- Length 1 [mm]: 32
- Length 2 [mm]: 25
- Overall Length [mm]: 72.4
-
Thread Size: M12X1,
25 - Spanner Size: 12
- Heat-up Time [min]: 7
- Manufacturer: MAGNETI MARELLI
- Name: MM UX20A


- Number of circuits: 1
- Plug Type: Shrink Connector
-
Material: CuSn
(copper- tin) - Cable insulation material: Silicone
- Cable Length [mm]: 60
- Number of pins: 1
- Cable Cross Section [mm²]: 2.5
- Manufacturer: 3RG



- Voltage [V]: 11.5
- Length [mm]: 125
- Manufacturer: FEBEST





- Construction Year to: 02.1994
- Required quantity: 4
- Glow Plug Design: Metal glow plug
- Voltage [V]: 11
- Thread Size: M12x1.25
-
alternative item: -
- for OE number: 5960G7
- Connector type: Thread
- Spanner Size: 12
- Version: Double coil
- Overall Length [mm]: 72
- Weight [g]: 27.5
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 20
- Manufacturer: DENSO
-
Name: DN DG-
001 - Quality class: Q
Additional information: "Tootja: DENSO
MONTEGO ESTATE (XE),
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
MONTEGO ESTATE (XE),
(kvaliteediklass: Q)"



- Voltage [V]: 11
- Length [mm]: 108
- Manufacturer: FEBEST



- Required quantity: 4
-
Glow Plug Design: after-
glow capable, Pencil- type Glow Plug - Voltage [V]: 11
-
Connector type: M5 /
3 Nm - Length [mm]: 71
- Fitting Depth [mm]: 25
-
Thread Size: M12x1,
25 - Spanner Size: 12 mm
- Current Strength [A]: 14
- Cone Pitch: 63
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 25
- Failure Moment [Nm]: 45
- Manufacturer: BERU
Technical Information: Cover glow plug thread and -shaft with mounting grease, (GKF 01 - Order No. 0 890 300 034), before fitting to enable easier removal and prevent corrosion.


- Technical Information Number: HKT
- Overall Length [mm]: 89
- Length 1 [mm]: 47
- Length 2 [mm]: 24
- Diameter [mm]: 5
- Voltage [V]: 10.5
- Manufacturer: ASHIKA





























































- Construction Year to: 02.1994
- Quantity: 4
- Voltage [V]: 12
-
Thread Size: M12 x 1,
25 -
Glow Plug Design: Pencil-
type Glow Plug - Rated Voltage [V]: 11
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.



- Construction Year from: 10.1990
- Construction Year to: 02.1994
- Engine Code: 12J
- Voltage [V]: 11
- Thread Size: M12x1.25
- Overall Length [mm]: 72.4
- Spanner Size: 12
- Tightening Torque [Nm]: 22
- Connector type: M5
- Manufacturer: VALEO



- Engine Code: 12 J
- for OE number: ERC8450
- Glow Plug Design: Metal glow plug
- Voltage [V]: 11
- Current Strength [A]: 5.5
- Resistor [Ohm]: 0.55
- Overall Length [mm]: 72
- Fitting Depth [mm]: 25
-
Thread Size: M12 x 1,
25 - Tightening Torque [Nm]: 23
- Spanner Size: 12 mm
-
Connector type: M5 /
3, 0- 4, 0 Nm - Manufacturer: NGK
-
Name: NG D-
POWER 1 -
Lisainfo: D-
POWER 1 -
Additional information: D-
POWER 1


- Technical Information Number: HKT
- Overall Length [mm]: 71
- Length 1 [mm]: 32
- Length 2 [mm]: 24
- Diameter [mm]: 6.1
- Voltage [V]: 11
- Manufacturer: JAPKO
- Lisainfo: B081
- Additional information: B081


- Voltage [V]: 11
-
Thread Size: M 12x1,
25 - Manufacturer: FAE





























-
Glow Plug Design: Pencil-
type Glow Plug, after- glow capable - Voltage [V]: 11
- Length [mm]: 71
-
Thread Size: M 12 x 1,
25 - Cone Pitch: 63
- Spanner Size: 12
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 25
- Connector type: M 5
- Fitting Depth [mm]: 25
- Manufacturer: BOSCH
- Name: BS 0250201039


- Technical Information Number: HKT
- Overall Length [mm]: 89
- Length 1 [mm]: 47
- Length 2 [mm]: 24
- Diameter [mm]: 5
- Voltage [V]: 5
- Manufacturer: JAPKO


- Required quantity: 4
-
Glow Plug Design: after-
glow capable, Pencil- type Glow Plug - Voltage [V]: 11
-
Connector type: M5 /
3 Nm - Length [mm]: 71
- Fitting Depth [mm]: 25
-
Thread Size: M12x1,
25 - Spanner Size: 12 mm
- Current Strength [A]: 14
- Cone Pitch: 63
- Tightening torque from [Nm]: 15
- Tightening torque to [Nm]: 25
- Failure Moment [Nm]: 45
- Manufacturer: BERU
Technical Information: Cover glow plug thread and -shaft with mounting grease, (GKF 01 - Order No. 0 890 300 034), before fitting to enable easier removal and prevent corrosion.


- Number of circuits: 1
- Supplementary Article/Supplementary Info: with squeeze connector
- Cable Length [mm]: 150
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Lisainfo: 107037 FEBI
- Additional information: 107037 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- Technical Information Number: HKT
- Overall Length [mm]: 91.5
- Length 1 [mm]: 46
- Length 2 [mm]: 24
- Diameter [mm]: 5
- Voltage [V]: 11
- Manufacturer: JAPKO


- Technical Information Number: HKT
- Overall Length [mm]: 70
- Length 1 [mm]: 33.5
- Length 2 [mm]: 17
- Diameter [mm]: 5
- Voltage [V]: 10.5
- Manufacturer: JAPKO
- Lisainfo: PS201 JAPKO
- Additional information: PS201 JAPKO


- Technical Information Number: HKT
- Overall Length [mm]: 89.5
- Length 1 [mm]: 44
- Length 2 [mm]: 24
- Diameter [mm]: 5
- Voltage [V]: 11
- Manufacturer: JAPKO


-
Glow Plug Design: Pencil-
type Glow Plug - Number of pins: 1
- long version:
- Length [mm]: 60
- angled version:
- Number of circuits: 1
- Cable Length [mm]: 150
- Cable Cross Section [mm²]: 2.5
- Cable insulation material: Silicone
- Supplementary Article/Supplementary Info: with shrink squeeze connector
-
Material: CuSn
(copper- tin) - Manufacturer: METZGER
- Lisainfo: 2324016 METZGER
- Additional information: 2324016 METZGER


-
Glow Plug Design: Pencil-
type Glow Plug - Number of pins: 1
- short version:
- Length [mm]: 40
- angled version:
- Number of circuits: 1
- Cable Length [mm]: 150
- Cable Cross Section [mm²]: 2.5
- Cable insulation material: Silicone
- Supplementary Article/Supplementary Info: with shrink squeeze connector
-
Material: CuSn
(copper- tin) - Manufacturer: METZGER


- Technical Information Number: HKT
- Overall Length [mm]: 74
- Length 1 [mm]: 32
- Length 2 [mm]: 29
- Diameter [mm]: 6.1
- Voltage [V]: 11
- Manufacturer: JAPKO