• Installatsiooni pool: Esisild, Tagasild
• Läbimõõt [mm]: 42
• Pidurisüsteem: AP Lockheed
• Versioon: Basic Parts
• Name: FR 242061
• Manufacturer: FRENKIT

• Diameter [mm]: 41
• Brake System: LOCKHEED
• Fitting Position: Rear Axle
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-077

• Fitting Position: Front Axle, Rear Axle
• Diameter [mm]: 42
• Brake System: AP Lockheed
• Manufacturer: FRENKIT
• Name: FR 242002

• Fitting Position: Rear Axle
• Brake System: AP Lockheed
• for brake disc thickness [mm]: 12.5
• Brake Caliper Type: Brake Caliper (2 pistons)
• Diameter [mm]: 41
• Quantity per axle: 2
• Manufacturer: QUICK BRAKE
• Name: QB 114-0294

• Fitting Position: Front Axle
• Diameter [mm]: 46
• Brake System: LOCKHEED
• Name: SE D4-191
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle
• Diameter [mm]: 46
• Brake System: AP Lockheed
• Manufacturer: FRENKIT
• Name: FR 246002

• Fitting Position: Rear Axle
• Diameter [mm]: 41
• Brake System: LOCK
• Full Set:
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2510C

• Fitting Position: Front Axle
• Brake Disc Type: Vented, solid
• Brake System: AP Lockheed
• for brake disc thickness [mm]: 14, 24
• Brake Caliper Type: Brake Caliper (4 pistons)
• Vehicle Identification Number (VIN) from: EA999999, FA000001
• Block Separation:
• Diameter [mm]: 46
• Quantity per axle: 2
• Manufacturer: QUICK BRAKE
• Name: QB 114-0197

• Fitting Position: Rear Axle
• Diameter [mm]: 41
• Brake System: AP Lockheed
• Version: Kit+Piston
• Full Set:
• Manufacturer: FRENKIT
• Name: FR 241904

• Fitting Position: Front Axle
• Diameter [mm]: 46
• Brake System: AP Lockheed
• Version: Kit+Piston
• Full Set:
• Manufacturer: FRENKIT
• Name: FR 246901

• Fitting Position: Front Axle
• Brake Disc Type: Vented, solid
• Brake System: AP Lockheed
• for brake disc thickness [mm]: 14, 24
• Brake Caliper Type: Brake Caliper (4 pistons)
• Vehicle Identification Number (VIN) from: EA999999, FA000001
• Block Separation:
• Diameter [mm]: 46
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston
• Manufacturer: QUICK BRAKE

• Installatsiooni pool: Tagasild paremal
• Pidurisüsteem: AP LOCKHEED
• Pidurisadulateostus: Pidurisadul (2 kolbi)
• Kolvi läbimõõt 1 [mm]: 41
• Kolvi läbimõõt 2 [mm]: 41
• pidurikettajämedusele (mm): 12,6
• pidurikettaläbimõõdule (mm): 290
• Seerianumber: HZT-LR-005
• paaris tootenumbrid: HZT-LR-004
• Manufacturer: NTY

• Installatsiooni pool: Tagasild vasakul
• Pidurisüsteem: AP LOCKHEED
• Pidurisadulateostus: Pidurisadul (2 kolbi)
• Kolvi läbimõõt 1 [mm]: 41
• Kolvi läbimõõt 2 [mm]: 41
• pidurikettajämedusele (mm): 12,6
• pidurikettaläbimõõdule (mm): 290
• Seerianumber: HZT-LR-004
• paaris tootenumbrid: HZT-LR-005
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Fabrication Number: HZP-LR-021
• Brake Caliper Type: Brake Caliper (4 pistons)
• Piston Diameter [mm]: 46
• for brake disc thickness [mm]: 24
• Number of connectors: 1
• Brake System: AP LOCKHEED
• paired article number: HZP-LR-020

• Fitting Position: Front Axle Left
• Fabrication Number: HZP-LR-020
• Brake Caliper Type: Brake Caliper (4 pistons)
• Piston Diameter [mm]: 46
• for brake disc thickness [mm]: 24
• Number of connectors: 1
• Brake System: AP LOCKHEED
• paired article number: HZP-LR-021

• Fitting Position: Rear Axle Left
• Diameter [mm]: 41
• Brake System: LOCKHEED
• Manufacturer: YSPARTS

• Fitting Position: Rear Axle Right
• Diameter [mm]: 41
• Brake System: LOCKHEED
• Manufacturer: YSPARTS

• Fitting Position: Front Axle Left
• Brake Caliper Type: Fixed Caliper (4 pistons)
• Material: Cast Iron
• Piston Diameter [mm]: 46
• paired article number: HZP-LR-009
• Fabrication Number: HZP-LR-008
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Brake Caliper Type: Fixed Caliper (4 pistons)
• Material: Cast Iron
• Piston Diameter [mm]: 46
• paired article number: HZP-LR-008
• Fabrication Number: HZP-LR-009
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Brake Caliper Type: Brake Caliper (2 pistons)
• Material: Grey Cast Iron
• Brake System: LOCKHEED
• paired article number: JBC1206
• Piston Diameter [mm]: 46
• for brake disc thickness [mm]: 24
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Right
• Brake Caliper Type: Brake Caliper (2 pistons)
• Material: Grey Cast Iron
• Brake System: LOCKHEED
• paired article number: JBC1205
• Piston Diameter [mm]: 46
• for brake disc thickness [mm]: 24
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Brake System: AP LOCKHEED
• Brake Caliper Type: Brake Caliper (4 pistons)
• Piston Diameter [mm]: 46
• paired article number: 131-04-986
• for brake disc thickness [mm]: 24
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Right
• Brake Caliper Type: Brake Caliper (2 pistons)
• Material: Grey Cast Iron
• Brake System: LOCKHEED
• paired article number: JBC1203
• Piston Diameter [mm]: 46
• for brake disc thickness [mm]: 14
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Brake Caliper Type: Brake Caliper (2 pistons)
• Material: Grey Cast Iron
• Brake System: LOCKHEED
• paired article number: JBC1204
• Piston Diameter [mm]: 46
• for brake disc thickness [mm]: 14
• Manufacturer: KAMOKA

• paired article number: 179096
• Brake Caliper Piston Diameter [mm]: 41
• Brake Caliper Type: Brake Caliper (2 pistons)
• New Part:
• Material: Cast Iron
• Fitting Position: Rear Axle Right
• Weight [kg]: 3.547
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 179097
• Brake Caliper Piston Diameter [mm]: 41
• Brake Caliper Type: Brake Caliper (2 pistons)
• New Part:
• Material: Cast Iron
• Fitting Position: Rear Axle Left
• Weight [kg]: 3.547
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Manufacturer Restriction: AP LOCKHEED
• Brake Caliper Type: Brake Caliper (2 pistons)
• Material: Cast Iron
• Piston Diameter [mm]: 41
• paired article number: BHS596E
• Exchange Part:
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN) to: *********EA999999
• Brake Disc Type: Vented
• paired article number: 179239
• Brake Caliper Piston Diameter [mm]: 46
• Brake Caliper Type: Brake Caliper (4 pistons)
• New Part:
• Material: Cast Iron
• Fitting Position: Front Axle Left
• Weight [kg]: 6.12
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: *********HA701009
• Brake Disc Type: solid
• Axle number from: 23L05988, 23L06079, 22L09655, 22L10272
• Axle number to: 23L06059, 22L10191
• Block Separation:
• paired article number: 181552
• Brake Caliper Piston Diameter [mm]: 41
• Brake Caliper Type: Brake Caliper (4 pistons)
• New Part:
• Material: Cast Iron
• Fitting Position: Front Axle Right
• Weight [kg]: 5.8
• Manufacturer: FEBI

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: *********HA701009
• Brake Disc Type: solid
• Axle number from: 23L05988, 23L06079, 22L09655, 22L10272
• Axle number to: 23L06059, 22L10191
• Block Separation:
• paired article number: 181553
• Brake Caliper Piston Diameter [mm]: 41
• Brake Caliper Type: Brake Caliper (4 pistons)
• New Part:
• Material: Cast Iron
• Fitting Position: Front Axle Left
• Weight [kg]: 5.8
• Manufacturer: FEBI

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: *********EA999999
• Brake Disc Type: Vented
• paired article number: 179238
• Brake Caliper Piston Diameter [mm]: 46
• Brake Caliper Type: Brake Caliper (4 pistons)
• New Part:
• Material: Cast Iron
• Fitting Position: Front Axle Right
• Weight [kg]: 6.12
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right
• Vehicle Identification Number (VIN) from: EA999999
• paired article number: BHS226E
• Manufacturer Restriction: AP LOCKHEED
• Brake Caliper Type: Fixed Caliper (4 pistons)
• Material: Cast Iron
• Piston Diameter [mm]: 46
• Single/Dual Circuit Brake Caliper: 1-circuit brake saddle
• Exchange Part:
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Vehicle Identification Number (VIN) from: EA999999
• paired article number: BHS225E
• Manufacturer Restriction: AP LOCKHEED
• Brake Caliper Type: Fixed Caliper (4 pistons)
• Material: Cast Iron
• Piston Diameter [mm]: 46
• Single/Dual Circuit Brake Caliper: 1-circuit brake saddle
• Exchange Part:
• Observe technical data:
• Manufacturer: LUCAS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Brake Caliper Type: Brake Caliper (2 pistons)
• Material: Grey Cast Iron
• Brake System: LOCKHEED
• paired article number: ZH0306
• Piston Diameter [mm]: 46
• for brake disc thickness [mm]: 24
• Manufacturer: ENERGY

• Fitting Position: Rear Axle
• Brake System: AP Lockheed
• for brake disc thickness [mm]: 12.5
• Brake Caliper Type: Brake Caliper (2 pistons)
• Diameter [mm]: 41
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: with piston