Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Tightening Torque [Nm]: 28
- Electrode Gap [mm]: 0.8
-
Thread Size: M14 x 1,
25 -
Spanner Size: 20,
8 -
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 19
- Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188704171
- Manufacturer: HELLA
- for OE number: 59622A
- Spanner Size: 20
-
Spark Plug: Nickel Middle Electrode,
1 - Earthed Electrode - Thread Length [mm]: 19
- Manufacturer: KAMOKA
-
for OE number: 09482-
00299 - Spanner Size: 20
-
Spark Plug: Nickel Middle Electrode,
1 - Earthed Electrode - Thread Length [mm]: 19
- Manufacturer: KAMOKA
- Required quantity: 8
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
-
Spanner Size: 20,
8 - Spark Position [mm]: 3
- Number of pins: 1
- Manufacturer: BOSCH
- Name: BS 0242235663
-
Engine Code: 25 D,
24 D - Quantity per packing unit: 10
- Electrode Gap [mm]: 0.7
- Diameter [mm]: 21
- Length [mm]: 73.5
-
Thread Size: M14 x 1,
25 -
Spark Plug: 1 -
Earthed Electrode - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 4
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Manufacturer: NGK
-
Name: NG V-
LINE 2 -
Additional information: V-
LINE 2 -
Lisainfo: V-
LINE 2
Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
-
Engine Code: 24D,
25D - Electrode Gap [mm]: 0.7
- Length [mm]: 126
-
Spark Plug: 1 -
Earthed Electrode - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Required quantity: 8
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.9
- Thread Size: M14x1.25
- Thread Length [mm]: 19
- Technical Information Number: RN9YC
-
Connector type: M4/
SAE - Packing Type: Carton
- Spanner Size: 21 mm
- Quality/ Grade: Nickel GE
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 9
- Projection [mm]: 1.5
- Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
-
Võtmekaugus: 20,
8 mm -
Keermemõõt: M14 x 1,
25 - Keermepikkus (mm): 19
- Sädemeasetus (mm): 3
- Manufacturer: NGK
- Name: NG BPR6E
Süüteküünal: Niklist keskelektrood, 1-massielektrood, veakõrvaldused, 5 koom, koos lametihendikohaga, püsiv SAE-ühendus
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Manufacturer: NGK
Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
-
Engine Code: 24 D,
25 D - Required quantity: 8
- Quantity per packing unit: 4
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Electrode Gap [mm]: 0.8
- Thread Size: M14x1.25
- Thread Length [mm]: 19
- Diameter [mm]: 14
- Connector type: Crimped SAE
- Spanner Size: 20.6 mm
- Tightening Torque [Nm]: 22
- Weight [g]: 58
- Gross Weight [g]: 61
-
alternative item: IW20TT,
IW20 - Manufacturer: DENSO
- Name: DN W20TT
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Required quantity: 8
- alternatively:
- Quantity per packing unit: 10
-
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Electrode Gap [mm]: 0.9
- Thread Size: M14x1.25
- Thread Length [mm]: 19
- Technical Information Number: CET8
-
Connector type: M4/
SAE - Packing Type: Carton
- Spanner Size: 21 mm
-
Quality/ Grade: Ti Poly-
V - Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1.5
- Name: CH CET8
- Manufacturer: CHAMPION
- Required quantity: 8
- alternatively:
- Quantity per packing unit: 10
-
Süüteküünal: 1-
massielektrood, koos lametihendikohaga -
Elektroodide vahe (mm): 0,
9 -
Keermemõõt: M14x1,
25 - Keermepikkus (mm): 19
-
Ühendustehnika: M4/
SAE - Võtmekaugus: 21 mm
-
Kvaliteet/klass: Poly-
V Tit - Väändejõud alates [Nm]: 25
- Väändejõud kuni [Nm]: 30
- Takistus alates [koom]: 3
- Takistus kuni [koom]: 10
- Manufacturer: BERU
-
Engine Code: 24 D,
25 D - Required quantity: 8
-
Fuel Type: CNG/
LPG - Quantity per packing unit: 4
- Electrode Gap [mm]: 1
- Thread Size: M14x1.25
- Thread Length [mm]: 19
- Diameter [mm]: 14
- Connector type: Solid SAE
- Spanner Size: 20.6 mm
- Tightening Torque [Nm]: 22
- Weight [g]: 58
- Gross Weight [g]: 61
- alternative item: IW20TT
- Manufacturer: DENSO
- Name: DN IW20TT
- Quality class: Q
Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Manufacturer: NGK
Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 -
Fuel Type: CNG/
LPG -
Recommended change interval [km]: 60,
000 - Manufacturer: NGK
- Lisainfo: LPG2
- Additional information: LPG2
Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks