• Fitting Position: Cylinder Head
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Fabrication Number: ECT-BM-002
• Manufacturer: NTY

• Required quantity: 1
• Manufacturer Restriction: für Heizkörper, für Verdampfer
• Number of pins: 2
• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV695
• Manufacturer: ESEN SKV

• Fabrication Number: ECT-BM-017
• Manufacturer: NTY

• Colour: black
• Fabrication Number: ECT-BM-001
• Manufacturer: NTY

• Engine Code: N47 D20 C
• Construction Year from: 07.2012
• Required quantity: 1
• Housing Colour: black
• Number of pins: 2
• Connector Shape: oval
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Quantity: 1
• Trim Level: N47ND20C
• Number of pins: 2
• Housing Colour: black
• Manufacturer: DELPHI
• Name: DE TS10501

• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG

• Engine Code: N47 D20 C
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 07.2012
• Quantity: 1
• Weight [kg]: 0.006
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Housing Colour: black
• Thread Size: M 12x125
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Number of connectors: 2
• Weight [kg]: 0.007
• Name: Andur,sisendohu temperatuur
• Manufacturer: FEB
• Additional information: FE171622
• Lisainfo: FE171622

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-BM-003
• Manufacturer: NTY

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-BM-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Height [mm]: 28.4
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: N47 D20 C
• Construction Year from: 07.2012
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Engine Code: N47 D20 C
• Construction Year from: 07.2012
• Required quantity: 1
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Engine Code: N47 D20 C
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 3
• Fabrication Number: ECS-BM-003
• Manufacturer: NTY

• Construction Year from: 07.2012
• Required quantity: 1
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 3
• Material: Plastic
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

Manufacturer: MAGNETI MARELLI

• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: METZGER

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• for OE number: 1362 7 805 152
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• for OE number: 13 62 7 804 742, 89420 WA010
• Number of pins: 3
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Fabrication Number: ECM-BM-000
• Manufacturer: NTY

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Housing Colour: black
• Number of pins: 2
• Connector Shape: oval
• Manufacturer: FAE

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11221

• Construction Year from: 07.2012
• Quantity: 1
• Manufacturer: VERNET

• Engine Code: N47 D20 C
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ERA

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.03
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 20 93 6411
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 13 62 7 808 013
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-BM-002
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Construction Year to: 06.2012
• Exhaust System: before turbocharger
• Pressure [Pa] from: 13,600
• Pressure [Pa] to: 400,000
• Manufacturer: NRF

• Fitting Position: Intake Manifold
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 3
• Material: Plastic
• Name: SW 20 94 7155
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before soot particulate filter
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: HEL
• Lisainfo: 6PP009409-021
• Additional information: 6PP009409-021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: N47 D20 C
• Number of pins: 3
• Pressure to [kPA]: 400
• Manufacturer: VDO

• Engine Code: N47 D20 C
• Construction Year to: 06.2012
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: FAE

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV350

• Number of connectors: 3
• Warranty: 5 years warranty
• Manufacturer: HUCO
• Name: HU 137417

• Engine Code: N47 D20 C
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.508
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of connectors: 3
• Weight [kg]: 0.014
• for OE number: 13 62 7 804 742
• Name: SW 33 10 1713
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N47 D20 C
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• for OE number: 13 62 7 804 742
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Number of connectors: 3
• Weight [kg]: 0.014
• for OE number: 13 62 7 804 742
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• not for emission standard: Euro 3 (D3)
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 12.2009
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.03
• Manufacturer: VALEO

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of circuits: 1
• Weight [kg]: 0.03
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 13627805152
• Manufacturer: MEAT&DORIA

• Engine Code: N47 D20 C
• Alternatively:
• Number of pins: 3
• Alternative Repair Kit: 550666
• Manufacturer: ERA

• Exhaust System: after soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Weight [kg]: 0.13
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Number of pins: 3
• Opening pressure [kPa]: 90
• Manufacturer: DELPHI

• for OE number: 13 62 8 507 634
• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Fabrication Number: ECS-BM-005
• Manufacturer: NTY

• Alternatively:
• Number of connectors: 3
• Connector Shape: D Shape
• Alternative Repair Kit: 551441
• Manufacturer: ERA

• Number of pins: 3
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles without urea injection (AdBlue®)
• not for emission standard: Euro 3 (D3)
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: N47 D20 C
• Exhaust System: before soot particulate filter
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.283
• Manufacturer: EPS

• Construction Year to: 06.2012
• Number of pins: 3
• Opening pressure [kPa]: 42
• Manufacturer: DLP

Name: CZUJNIK CI—N. SPALIN BMW 116D, 118D, X6 XDRIVE 40D 04-

• Engine Code: N47 D20 C
• Number of pins: 3
• Pressure to [kPA]: 400
• Manufacturer: FAE

• Engine Code: N47 D20 C
• Construction Year to: 06.2012
• Exhaust System: before turbocharger
• Pressure from [kPA]: 14
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 3.643
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Cable Length [mm]: 460
• Number of pins: 2
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV449

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 13 62 7 808 013
• Manufacturer: MEAT&DORIA

• for OE number: 13 62 7 788 743
• Manufacturer: KAMOKA

• Construction Year to: 06.2012
• Housing Type: with housing
• Fabrication Number: EPP-BM-012
• Manufacturer: NTY

• Cable Length [mm]: 590
• Number of pins: 2
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV448

• Construction Year to: 06.2012
• Number of pins: 3
• Pressure [Pa] from: 42,000
• Pressure [Pa] to: 502,000
• Manufacturer: FAE

• Number of pins: 3
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• for OE number: 13 62 7 804 742, 89420 WA010
• Manufacturer: MEAT&DORIA

• Construction Year from: 07.2012
• Number of pins: 3
• Opening pressure [kPa]: 100
• Name: CZUJNIK CI—N. SPALIN BMW 114D, X6 XDRIVE 40D 04-
• Manufacturer: DLP

• Fabrication Number: EGT-BM-014
• Cable Length [mm]: 300
• Manufacturer: NTY

• Number of pins: 3
• Manufacturer: FAE