• Connector Shape: rectangular
• Thread Size: M12
• Number of pins: 1
• Supplementary Article/Info 2: with seal ring
• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.2
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Engine Code: N57 D30 B
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO

• Engine Code: N57 D30 B
• Colour: brown
• Pressure to [bar]: 0.5
• Pressure from [bar]: 0.2
• Pressure [bar]: 0.3
• Thread Size: M12x1,5
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: N57 D30 B
• Colour: brown
• Pressure to [bar]: 0.5
• Pressure from [bar]: 0.2
• Pressure [bar]: 0.3
• Thread Size: M12x1,5
• Spanner Size: 24
• Manufacturer: FACET

• Connector Shape: rectangular
• Operating Mode: Hydraulic
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Number of pins: 1
• Switch point from [bar]: 0.2
• Switch point to [bar]: 0.5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M 12x1,5
• Number of pins: 1
• Housing Colour: brown
• Manufacturer: FAE

• Length [mm]: 70
• Housing Colour: black
• Manufacturer: KAMOKA

• Pressure from [bar]: 0.2
• Pressure to [bar]: 0.5
• Combi Switch Function: Normally Closed Contact
• Colour: brown
• Spanner Size: 24
• Thread Size: M12 x 1,5
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: MEY

• Pressure [bar]: 5
• Housing Colour: brown
• Thread Size: M12x1.5
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: DELPHI
• Name: oil pressure sensor
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Length [mm]: 70
• Material: Plastic
• Number of pins: 2
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Thread Size: M12x1,5
• Colour: brown
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pressure [bar]: 0.35
• Thread Size: M12 x 1,5
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Switch Pressure [bar]: 0.3
• Thread Size: M12x1.5
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Fabrication Number: ECT-BM-017
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Thread Size: M12x1.5
• for OE number: 13627797957
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 2
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Thread Size: M12 x 1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: N57 D30 B
• Housing Colour: black
• Number of pins: 2
• Connector Shape: oval
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Number of pins: 2
• Thread Size: M 12
• Thread Pitch [mm]: 1.5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: N57 D30 B
• Thread Size: M12x1,5
• Manufacturer: FACET

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-BM-003
• Manufacturer: NTY

• Thread Size: M12x1,5
• Number of pins: 2
• Mounting Type: Screw Connection
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT013113241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N57 D30 B
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: N57 D30 B
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Length [mm]: 70
• External Thread Size: M12 x 1,5
• Bolt Head-/Nut Design: Male Star
• Number of connectors: 2
• Material: Plastic
• Screw length below head [mm]: 45
• Weight [kg]: 0.01
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Length [mm]: 70
• External Thread Size: M12 x 1,5
• Bolt Head-/Nut Design: Male Star
• Number of connectors: 2
• Material: Plastic
• Screw length below head [mm]: 45
• Weight [kg]: 0.01
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Charge Air Cooler
• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: rectangular
• Colour: black
• Power [W]: 0.06
• Manufacturer: METZGER

• Length [mm]: 70
• External Thread Size: M12 x 1,5
• Bolt Head-/Nut Design: Male Star
• Number of connectors: 2
• Material: Plastic
• Screw length below head [mm]: 45
• Weight [kg]: 0.01
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: SW 20 93 7032
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Name: DE SS12009-12B1
• Manufacturer: DELPHI

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: N57 D30 B
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Height [mm]: 28.4
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: N57 D30 B
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Engine Code: N57 D30 B
• Manufacturer: FACET

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: METZGER

Manufacturer: MAGNETI MARELLI

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 28.2
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Number of pins: 2
• Housing Colour: black
• Connector Shape: rectangular
• Manufacturer: FAE

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for OE number: 13627803093
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: DLP

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

Manufacturer: VERNET

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 20 93 6411
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Guarantee: 5 years guarantee
• Number of pins: 3
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Code: N57 D30 B
• Manufacturer: FACET

• Engine Code: N57 D30 B
• Name: EP 1.953.826
• Manufacturer: EPS

• Engine Code: N57 D30 B
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Engine Code: N57 D30 B
• Manufacturer: FACET

• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 13 62 7 804 150
• Fabrication Number: EPP-BM-016
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

Manufacturer: NRF

• Number of pins: 3
• Connector Shape: oval
• Manufacturer: ERA

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAU KORB. BMW 1 F20 118D 11-
• Manufacturer: BRM

• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV347

• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU013122801

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 05.2015
• Block Separation:
• Oxygen Sensor: Diagnostic Probe, Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 530
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 05.2015
• Block Separation:
• Oxygen Sensor: Diagnostic Probe, Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 540
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: N57 D30 B
• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Length [mm]: 500
• Name: Lambda andur
• Manufacturer: MAX

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Construction Year to: 05.2015
• Length [mm]: 500
• Number of pins: 6
• Manufacturer: FAE

• Oxygen Sensor: Broadband Oxygen Sensor
• Number of pins: 5
• Cable Length [mm]: 410
• Quality: OE EQUIVALENT
• for OE number: A0035427018
• Manufacturer: MEAT&DORIA

• Block Separation:
• Cable Length [mm]: 540
• Manufacturer: DELPHI ELEKTRONIKA

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Broadband Oxygen Sensor, Heated Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: N57 D30 B
• Required quantity: 1
• Block Separation:
• Cable Length [mm]: 570
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.472
• Manufacturer: EPS

Fitting Position: before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: N57 D30 B
• Required quantity: 1
• Block Separation:
• Cable Length [mm]: 570
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Fitting Position: before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Required quantity: 1
• Housing Type: without housing
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: BREMI

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Number of pins: 9
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV424

• Construction Year to: 05.2015
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Block Separation:
• Number of circuits: 5
• Overall Length [mm]: 540
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10504-12B1

• for OE number: 13627804150
• Manufacturer: MEAT&DORIA