Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Weight [kg]: 0.043
- Outer Diameter [mm]: 28
- Inner Diameter [mm]: 13
- Height [mm]: 20.5
- Manufacturer: 3RG
-
Material: Rubber/
Metal - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 20.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 28
-
Material: Rubber/
Metal - Fitting Position: Front
- Weight [kg]: 0.044
-
Name: PUKS,
PIKIVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 38
- Outer Diameter [mm]: 31
- Diameter 1 [mm]: 16.6
- Diameter 2 [mm]: 25
- Manufacturer: 3RG
- Quantity per packing unit: 5
- Length [mm]: 20.5
-
Material: Rubber/
Metal - Outer Diameter [mm]: 28
- Inner Diameter [mm]: 14
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Length [mm]: 38
- Inner Diameter [mm]: 25
- Outer Diameter [mm]: 31
- Fitting Position: Rear
- Weight [kg]: 0.064
- Manufacturer: FEBI BILSTEIN
- Additional information: F171154
- Lisainfo: F171154
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fabrication Number: NKW-
BM- 000 - Length [mm]: 56
- Diameter [mm]: 24
- Manufacturer: NTY
-
Name: NTY NKW-
BM- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Transmission Type: Automatic Transmission
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Production date to: 201505
- Weight [kg]: 0.256
- Packaging length [cm]: 5.9
- Packaging width [cm]: 5.9
- Packaging height [cm]: 2.4
- Diameter [mm]: 24
- Height [mm]: 56
- Manufacturer: FEBEST
-
Additional information: FSTASBM-
F15 -
Lisainfo: FSTASBM-
F15
-
Fabrication Number: NPE-
BM- 001 - Manufacturer: NTY
Lisainfo: Läbimõõt 110 mm Välis läbimõõt peab olema 140 mm ja poltide tsentrid105 mm. OE kood 26117610061 Additional information: Läbimõõt 110 mm Välis läbimõõt peab olema 140 mm ja poltide tsentrid105 mm. OE kood 26117610061
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front and Rear
-
Supplementary Article/Supplementary Info: without fastening/
mounting material - Joint Type: Flexible Joint Disc
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: MAX
-
Lisainfo: 49-
0969
Läbimõõt 140 mm -
Additional information: 49-
0969
Läbimõõt 140 mm
-
Fitting Position: Front,
Rear - for OE number: 26 11 7 546 425
- Manufacturer: GSP
- for OE number: 26 11 7 610 061
- Joint Type: Flexible Joint Disc
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: TRU
- Lisainfo: 08.34.164
- Additional information: 08.34.164
-
Fitting Position: Front,
Rear - Inner Diameter [mm]: 55
- Bolt Hole Circle Ø [mm]: 105
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Joint Type: Flexible Joint Disc
- Weight [kg]: 1.443
- Required quantity: 1
-
Name: Liigend,
pikivoll - Manufacturer: TED
-
Fitting Position: Left Front,
Left Rear - Block Separation:
- Joint Type: Flexible Joint Disc
- Number of Holes: 6
- Outer Diameter [mm]: 143
- Bolt Hole Circle Ø [mm]: 105
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Bolt Hole Circle Ø [mm]: 105
- Weight [g]: 973
- Name: IM 2380
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front and Rear
- Thickness [mm]: 41
- Inner Diameter [mm]: 54
- Outer Diameter [mm]: 140
- Bolt Hole Circle Ø [mm]: 105
- Hole Spacing [mm]: 64
- Outer Diameter 2 [mm]: 21
- Weight [kg]: 0.921
- Inner Diameter 2 [mm]: 12
- Observe service information:
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: FEB
- Additional information: F26294
- Lisainfo: F26294
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 41
- Inner Diameter [mm]: 54
- Outer Diameter [mm]: 140
- Bolt Hole Circle Ø [mm]: 105
- Number of Holes: 6
-
Supplementary Article/Supplementary Info: with nuts,
with bush -
Supplementary Article/Info 2: with bolts/
screws - Fitting Position: Rear
- Weight [kg]: 1.054
- Observe service information:
-
Name: Liigend,
pikivoll - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Bolt Hole Circle Ø [mm]: 105
- Number of Holes: 6
- Supplementary Article/Supplementary Info: with nuts
-
Supplementary Article/Info 2: with bolts/
screws - Fitting Position: Rear
- Weight [kg]: 1.46
- Observe service information:
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: FEB
- Lisainfo: 43527 FEBI
- Additional information: 43527 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Bolt Hole Circle Ø [mm]: 105
- Number of Holes: 6
- Supplementary Article/Supplementary Info: with nuts
-
Supplementary Article/Info 2: with bolts/
screws - Fitting Position: Rear
- Observe service information:
- Name: SW 20 94 3527
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Diameter [mm]: 144
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Joint Type: Flexible Joint Disc
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 105
- Quantity Unit: Piece
-
Name: Liigend,
pikivoll - Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Front
- Diameter [mm]: 144
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Joint Type: Flexible Joint Disc
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 105
- Quantity Unit: Piece
-
Name: Liigend,
pikivoll - Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Rear
- Diameter [mm]: 144
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Joint Type: Flexible Joint Disc
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 105
- Quantity Unit: Piece
-
Name: Liigend,
pikivoll - Manufacturer: MEY
-
Lisainfo: 3141522113/
HD -
Additional information: 3141522113/
HD
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks