• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Manufacturer: JP GROUP A/S
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 16
• Thread Size: M8x1,25
• Thread Type: with external thread
• Spanner Size: Hex-6
• Manufacturer: QUICK BRAKE
• Lisainfo: M8x1.25 16,0mm Hex-6 2tk
• Additional information: M8x1.25 16,0mm Hex-6 2tk

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Fabrication Number: HCZ-BM-045
• Manufacturer: NTY

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Manufacturer: JP GROUP

• Installatsiooni pool: esisild vasakul, esisild paremal
• Anduritüüp: Aktiivne andur
• Manufacturer: JP GROUP A/S
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• for brake disc diameter [mm]: 348
• for brake disc thickness [mm]: 36
• Installatsiooni pool: esisild paremal
• Välisläbimõõt [mm]: 385
• Siseläbimõõt [mm]: 185

• Thread Size: M8 x 1,25
• Length [mm]: 15
• Bolt Head-/Nut Design: Hexagon Socket
• Fitting Position: Front Axle both sides, Rear Axle both sides
• Quantity Unit: Set
• Quantity: 2
• Quality/ Grade: 8,8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Pikkus (mm): 15,5
• Väliskeerme mõõde: M8 x 1,25
• Kvaliteet/klass: 10.9
• Võtmekaugus: 6
• Kruvipea-/Mutriprofiil: sisekuuskant
• Pealispind: fosfeeritud
• Installatsiooni pool: Esisild, Tagasild
• Kaal (kg): 0,01
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: PROFIPOWER

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Ate
• Manufacturer: AUTOFREN SEINSA
• Additional information: D42483A
• Lisainfo: D42483A

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Pikkus (mm): 15,7
• Keermemõõt: M8X1,25
• Materjal: Metall
• Pealispind: Kroom-(VI)-vaba passiveerimine
• Kruvipea-/Mutriprofiil: sisekuuskant
• ka universaaltootena saadav vaata toode-nr.: TPM1000
• Manufacturer: TEXTAR

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: QUICK BRAKE
• Name: QB 109-1201

• Fitting Position: Rear Axle
• Brake System: Teves
• Weight [kg]: 0.044
• Manufacturer: TOMEX C

• Fitting Position: Rear Axle
• Brake System: ATE
• Weight [kg]: 0.1
• Manufacturer: ABS

• Brake Type: Disc Brake
• Fitting Position: Front Axle Left
• Length [mm]: 1,087
• Fabrication Number: HCZ-BM-028
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Fabrication Number: HCZ-BM-068
• Manufacturer: NTY

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901201

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN HAMULCE

• Installatsiooni pool: Tagasild
• Kulumisnäidikute arv [ühe telje kohta]: 1
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 1 075
• OE-numbri jaoks: 3435 6 791 960
• Kulumishoiatus kontakt: Detektor muutuda piduriklotsid
• Piduriliik: Ketaspidur
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: Esisild
• Kulumisnäidikute arv [ühe telje kohta]: 1
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 1 090
• OE-numbri jaoks: 123 456 789
• Kulumishoiatus kontakt: Detektor muutuda piduriklotsid
• Piduriliik: Ketaspidur
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Brake System: ATE
• Quantity per packing unit: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0295
• Quality class: PJ

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Piduriliik: Ketaspidur
• Installatsiooni pool: Esisild
• OE-numbri jaoks: 34 35 6 775 850
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Brake System: ATE
• Quality class: PJ
• Name: Brake pads fitting kit

• Quantity per packing unit: 10
• OE-numbri jaoks: 34 35 6 791 958
• Installatsiooni pool: esisild mõlemapoolselt
• Piduriliik: Ketaspidur
• Manufacturer: TRUCKTEC

• Brake Type: Disc Brake
• Fitting Position: Front Axle Left
• Number of wear indicators [per axle]: 1
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 1,065
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0285A

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 1,085
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE

• Fitting Position: Front Axle
• Brake System: ATE
• Pikkus 1 [mm]: 1 087
• Piduriliik: Ketaspidur
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0211

• Fitting Position: Rear Axle
• Brake System: ATE
• Pikkus 1 [mm]: 1 066
• Piduriliik: Ketaspidur
• Name: DE LZ0213
• Manufacturer: DELPHI

• Construction Year to: 05.2015
• Fitting Position: Rear Axle
• Pikkus (mm): 1 066
• Piduriliik: Ketaspidur
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Front Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 1 080
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

• Fitting Position: Rear Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 1 070
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW

• Construction Year to: 05.2015
• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH UK£ADY HAMULCOWE

• Fitting Position: Front Axle Left
• Piduriliik: Ketaspidur
• Pikkus (mm): 1 083
• Kulumisnäidikute arv [ühe telje kohta]: 1
• Name: BR A 00 422
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 1 066
• Kulumisnäidikute arv [ühe telje kohta]: 1
• Manufacturer: BREMBO
• Name: BR A 00 423

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-BM-030
• Manufacturer: NTY

• Fitting Position: Front Axle
• Length [mm]: 920
• Cable Length [mm]: 880
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Colour: black
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV417
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Brake System: ATE
• Weight [kg]: 0.16
• Manufacturer: ABS

• Fitting Position: Front Axle Left
• Piduriliik: Ketaspidur
• Pikkus (mm): 1 080
• pakendi pikkus [cm]: 26
• pakendi laius [cm]: 15
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,047
• Manufacturer: TEXTAR

• Construction Year to: 05.2015
• Fitting Position: Front Axle
• Pikkus (mm): 1 083
• Piduriliik: Ketaspidur
• Manufacturer: BOSCH
• Name: BS 1987473500

• Fitting Position: Rear Axle
• Pikkus 1 [mm]: 1 055
• Piduriliik: Ketaspidur
• Name: DE LZ0343
• Manufacturer: DELPHI

• Fitting Position: Rear Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 1 065
• pakendi pikkus [cm]: 26
• pakendi laius [cm]: 15
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,045
• Manufacturer: TEXTAR

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Left, Right
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Right
• Colour: silver
• Outer Diameter [mm]: 385
• Inner Diameter [mm]: 190
• Material: Aluminium
• paired article number: 131-07-131
• Article number of recommended accessories: 231-03-231
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 131-07-132

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left
• Colour: silver
• Outer Diameter [mm]: 385
• Inner Diameter [mm]: 190
• Material: Aluminium
• paired article number: 131-07-132
• Article number of recommended accessories: 231-03-232
• Assy./disassy. by qualified personnel required!:
• Name: AB 131-07-131
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HTO-BM-049
• Manufacturer: NTY

• Fitting Position: Front Axle Right
• Surface: Zinc-coated
• Fabrication Number: HTO-BM-031
• paired article number: HTO-BM-030
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Surface: Zinc-coated
• Fabrication Number: HTO-BM-030
• paired article number: HTO-BM-031
• Manufacturer: NTY

• Required quantity: 1
• Fitting Position: Front Axle Left
• Brake Type: Disc Brake
• Length [mm]: 1,087
• Manufacturer: ATE

• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,065
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake System: ATE
• Manufacturer: QUICK BRAKE
• Name: QB 109-1851

• Fitting Position: Right, Front Axle
• Material: Aluminium
• Name: CFD 610338
• Manufacturer: DACO

• Fitting Position: Left, Front Axle
• Material: Aluminium
• Name: CFD 610337
• Manufacturer: DACO

• Installatsiooni pool: esisild vasakul
• Materjal: Alumiinium
• Manufacturer: KAMOKA

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 955
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: esisild paremal
• Materjal: Alumiinium
• Manufacturer: KAMOKA

• Construction Year to: 05.2015
• Fitting Position: Rear Axle
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV359

• Piduriliik: Ketaspidur
• Installatsiooni pool: Esisild
• Hoiatuskontakti pikkus (mm): 1 087
• vajaminev tükihulk: 1
• Manufacturer: MEYLE

• paaris tootenumbrid: 176765
• Installatsiooni pool: esisild vasakul
• Kaal (kg): 0,68
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 176764 FEBI
• Additional information: 176764 FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paaris tootenumbrid: 176764
• Installatsiooni pool: esisild paremal
• Kaal (kg): 0,68
• Hooldusinfot jälgida:
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 176765 FEBI
• Additional information: 176765 FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 988
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Diameter 1 [mm]: 182
• Thickness [mm]: 10
• Weight [kg]: 0.1
• Surface: Cathodic Painting
• Material: Sheet Steel
• Manufacturer: ABS

• Pikkus (mm): 985
• Ühenduste arv: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaablipikkus (mm): 880
• Kaal (kg): 0,05
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paaris tootenumbrid: 33 10 5636
• Installatsiooni pool: esisild paremal
• Kaal (kg): 0,68
• Name: SW 33 10 5634
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paaris tootenumbrid: 33 10 5634
• Installatsiooni pool: esisild vasakul
• Kaal (kg): 0,68
• Name: SW 33 10 5636
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for brake disc diameter [mm]: 348
• for brake disc thickness [mm]: 36
• Installatsiooni pool: esisild vasakul
• Välisläbimõõt [mm]: 385
• Siseläbimõõt [mm]: 185

• Pikkus (mm): 985
• Ühenduste arv: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaablipikkus (mm): 880
• Kaal (kg): 0,05
• Name: SW 20 10 3279
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Cable Length [mm]: 880
• Sensor Type: Active sensor
• Fitting Depth [mm]: 31
• Number of connectors: 2
• Manufacturer: ERA

• Fitting Position: Front Axle Right
• Manufacturer: YSPARTS

• Fitting Position: Front Axle Left
• Manufacturer: YSPARTS

• OE-numbri jaoks: 34 11 6 775 265
• Installatsiooni pool: esisild vasakul
• Manufacturer: TRUCKTEC

• Installatsiooni pool: esisild vasakul
• Materjal: Alumiinium
• paaris tootenumbrid: 503 348
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left
• Guarantee: 3 years guarantee
• paired article number: 57SKV138
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV137

• Fitting Position: Front Axle
• Tootja piirang: ATE
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads fitting kit

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901851

• Fitting Position: Front Axle
• Overall Length [mm]: 970
• Length [mm]: 31
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 865
• paired article number: 31225
• Weight [kg]: 0.09
• Manufacturer: ABS

• Fitting Position: Front Axle Right
• Guarantee: 3 years guarantee
• paired article number: 57SKV137
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Right
• Manufacturer: OYODO

• Fitting Position: Front Axle Left
• Manufacturer: OYODO

• Installatsiooni pool: esisild paremal
• Materjal: Alumiinium
• paaris tootenumbrid: 503 347
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for brake disc thickness [mm]: 36
• for brake disc diameter [mm]: 348
• Installatsiooni pool: esisild vasakul
• Värv: hõbedane
• Materjal: Alumiinium
• paaris tootenumbrid: BSP-5008R
• Manufacturer: OPTIMAL ZAWIESZENIE

• for brake disc thickness [mm]: 36
• for brake disc diameter [mm]: 348
• Installatsiooni pool: esisild paremal
• Värv: hõbedane
• Materjal: Alumiinium
• paaris tootenumbrid: BSP-5008L
• Manufacturer: OPTIMAL ZAWIESZENIE

• Installatsiooni pool: esisild vasakul
• paaris tootenumbrid: V20-3591
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Front Axle
• Quantity: 2
• Anduritüüp: Aktiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 926
• Manufacturer: DELPHI ELEKTRONIKA