• General Information: Gasket bolt for transmission oil sump
• Manufacturer: BORSEHUNG

• Transmission Type: 8-Speed Automatic Transmission
• Transmission ID: 8HP45Z, 8HP70Z
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with filter, with screw set
• Oil Sump Material: Plastic
• Assy./disassy. by qualified personnel required!:
• Name: AB 100-00-157
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Filter type: Filter Insert
• Number of mounting bores: 13
• Transmission Type: Automatic Transmission
• Length [mm]: 488
• Width [mm]: 284
• Height [mm]: 50
• Supplementary Article/Supplementary Info: with gasket/seal, with integrated hydraulic filter
• Manufacturer: KAMOKA

• Transmission Type: 6-Speed Automatic Transmission
• Width [mm]: 300
• Height [mm]: 108
• Supplementary Article/Supplementary Info: with oil drain plug, with gasket/seal
• Length [mm]: 495
• Supplementary Article/Info 2: with filter
• See accessories list for additionally required parts:
• Observe system fill quantity:
• Fabrication Number: FSF-LR-000
• Manufacturer: NTY
• Name: NTY FSF-LR-000

• Fabrication Number: BMO-BM-003
• Manufacturer: NTY
• Name: NTY BMO-BM-003

• Fabrication Number: BMO-BM-004
• Manufacturer: NTY
• Name: NTY BMO-BM-004

• Filter type: Filter Insert
• Transmission Code: 6HP
• Transmission Type: Automatic Transmission
• Length [mm]: 498
• Width [mm]: 299
• Height [mm]: 109
• Supplementary Article/Supplementary Info: with gasket/seal, with integrated hydraulic filter
• Manufacturer: KAMOKA
• Additional information: F600701 KAMOKA
• Lisainfo: F600701 KAMOKA

• Filter type: Filter Insert
• Transmission Code: 6HP
• Transmission Type: Automatic Transmission
• Length [mm]: 484
• Width [mm]: 302
• Height [mm]: 118
• Supplementary Article/Supplementary Info: with gasket/seal, with integrated hydraulic filter
• Manufacturer: KAMOKA

• Transmission Type: 6-Speed Automatic Transmission
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with filter
• Oil Sump Material: Plastic
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 100-00-130

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Manufacturer: JPN

Manufacturer: JPN

• Material: Plastic
• Transmission Code: GA8HP45Z, GA8HP70Z
• Manufacturer: DR MOTOR
• Name: DRM 0671

• Name: Oil pan (gearbox)
• Quality class: PJ

Lisainfo: X5 (E70), 04.10- (kvaliteediklass PJ)

• Name: Oil pan (gearbox)
• Quality class: PJ

Lisainfo: 5 E60/E61 03-10 (kvaliteediklass PJ)

• Transmission ID: GA8HP70Z, GA8HP45Z
• Supplementary Article/Supplementary Info: with gaskets/seals, with oil drain plug
• Supplementary Article/Info 2: with filter, with bolts/screws
• Oil Sump Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Supplementary Article/Supplementary Info: with gaskets/seals, with oil drain plug
• Transmission Code: GA6HP26Z
• Supplementary Article/Info 2: with filter
• Transmission Type: 6-Speed Automatic Transmission
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with filter
• Length [mm]: 486
• Manufacturer: BGA

• Transmission Code: ZF 6HP28, 6HP26Z
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: with filter
• Observe system fill quantity:
• Width [mm]: 300
• Height [mm]: 108
• Supplementary Article/Supplementary Info: with oil drain plug, with gasket/seal
• Depth [mm]: 495
• See accessories list for additionally required parts:
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VAICO

Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Guarantee: 3 years guarantee
• Transmission ID: 6HP19 / 6HP21
• Weight [kg]: 2.47
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 48SKV805

• Transmission Type: Automatic Transmission
• Transmission ID: GA8HP70Z
• Oil Sump Material: Plastic
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with filter, with screw set
• Number of bolts/screws: 13
• Observe system fill quantity:
• Observe the vehicle manufacturer specifications:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Supplementary Info: with gasket/seal, with oil drain plug
• See accessories list for additionally required parts:
• Transmission Type: 8-Speed Automatic Transmission
• Supplementary Article/Info 2: with filter, without bolts/screws
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VIEROL
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Code: 8HP45 XHIS, 8HP70, 8HP70 HIS, 8HP50Z, 8HP70Z, 8HP45Z, 8HP75Z General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 487
• Width [mm]: 286
• Height [mm]: 54
• Manufacturer: HENGST FILTRY

• Transmission Code: 8HP45/70
• for OE number: 24 11 5 A13 115
• Name: OLIVANN, AUTOMAATKŽIGUKAST
• Manufacturer: TRU

• Transmission Code: ZF 6HP21, 6HP19Z
• Supplementary Article/Supplementary Info: with oil drain plug, with gasket/seal
• Height [mm]: 115
• Width [mm]: 485
• Depth [mm]: 300
• Supplementary Article/Info 2: with filter
• See accessories list for additionally required parts:
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Manufacturer: VIEROL
• Quality class: PJ
• Name: Automatic transmission filter

Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: Automatic Transmission
• Transmission ID: GA6HP26Z
• Oil Sump Material: Plastic
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with filter, with screw set
• Number of bolts/screws: 21
• Observe system fill quantity:
• Observe the vehicle manufacturer specifications:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: with filter, with bolts/screws
• Supplementary Article/Supplementary Info: with gasket/seal, with oil drain plug
• Transmission Type: 8-Speed Automatic Transmission
• See accessories list for additionally required parts:
• Recommended change interval [km]: 80,000
• Recommended change interval [years]: 5
• Name: MISKA OLEJOWA AUTOMATYCZNEJ SKRZYNI BIEGàW BMW
• Manufacturer: VAI
• Quality class: PJ

Transmission Code: 8HP45 XHIS, 8HP70, 8HP70 HIS, 8HP45Z, 8HP75Z, 8HP50Z, 8HP70Z General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Code: 6HP26
• for OE number: 24 11 7 571 227
• Name: OLIVANN, AUTOMAATKŽIGUKAST
• Manufacturer: TRU

• Supplementary Article/Info 2: with bolts/screws
• for OE number: 24 11 8 612 901
• Guarantee: 3 years guarantee
• Supplementary Article/Supplementary Info: with gaskets/seals, with oil drain plug
• Transmission ID: 8HP45Z, 8HP70Z
• Transmission Type: 8-Speed Automatic Transmission
• Quantity Unit: Kit
• Width [mm]: 55
• Height [mm]: 285
• Length [mm]: 490
• Seal Material: Rubber
• Material: Plastic
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Length [mm]: 303
• Width [mm]: 497
• Height [mm]: 108
• Weight [kg]: 1.91
• Inner Diameter [mm]: 16
• Manufacturer: METALCAUCHO

• Height [mm]: 107.7
• Overall Length [mm]: 497.53
• Width [mm]: 304
• Inner Diameter 2 [mm]: 26
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with filter
• Packaging width [cm]: 12.5
• Packaging length [cm]: 31
• Packaging height [cm]: 49.5
• Manufacturer: MAHLE KNECHT

• Height 1 [mm]: 26
• Height [mm]: 107.7
• Overall Length [mm]: 497.53
• Width [mm]: 304
• Inner Diameter 2 [mm]: 26
• Number of Holes: 24
• Supplementary Article/Supplementary Info: with gasket/seal
• Transmission Code: 6HP26Z
• Oil Sump Material: Plastic
• Supplementary Article/Info 2: with filter
• Transmission Type: 6-Speed Automatic Transmission
• Packaging width [cm]: 12.5
• Net Weight [g]: 1,677
• Packaging length [cm]: 31
• Packaging height [cm]: 49.5
• Name: KN HX152
• Manufacturer: KNECHT

• Height [mm]: 53.5
• Overall Length [mm]: 486.5
• Width [mm]: 285
• Inner Diameter 2 [mm]: 35
• Inner Diameter 3 [mm]: 34.9
• Number of Holes: 13
• Supplementary Article/Supplementary Info: with gasket/seal
• Transmission Code: 8HP45Z, 8HP50Z, 8HP70Z, 8HP75Z
• Oil Sump Material: Plastic
• Supplementary Article/Info 2: with filter
• Transmission Type: 8-Speed Automatic Transmission
• Packaging width [cm]: 33
• Packaging length [cm]: 52
• Packaging height [cm]: 7
• Manufacturer: MAHLE KNECHT

• Height [mm]: 53.5
• Overall Length [mm]: 486.5
• Width [mm]: 285
• Inner Diameter 2 [mm]: 35
• Number of Holes: 13
• Supplementary Article/Supplementary Info: with gasket/seal
• Transmission Code: 8HP45Z, 8HP50Z, 8HP70Z, 8HP75Z
• Oil Sump Material: Plastic
• Supplementary Article/Info 2: with filter
• Transmission Type: 8-Speed Automatic Transmission
• Net Weight [g]: 1,777
• Packaging width [cm]: 33
• Packaging length [cm]: 52
• Packaging height [cm]: 7
• Manufacturer: FILTRY KNECHT / MAHLE

• Transmission Code: GA8HP45Z, GA8HP70Z
• Material: Plastic
• Alternative Repair Kit: 8020033
• Manufacturer: METZGER

Supplementary Article/Supplementary Info: with integrated hydraulic filter, with oil drain plug Supplementary Article/Info 2: with oil sump gasket, with screw set, with sealing plug

• Transmission Code: GA8HP45Z, GA8HP70Z
• Supplementary Article/Info 2: with oil sump gasket, with screw set
• Material: Plastic
• Alternative Repair Kit: 0899058
• Manufacturer: METZGER

Supplementary Article/Supplementary Info: with integrated hydraulic filter, with oil drain plug