• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-BM-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of connectors: 3
• Fabrication Number: ECS-BM-007
• Manufacturer: NTY

• Number of pins: 3
• Fabrication Number: ECS-BM-003

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV351

• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles without SCR system
• Connector Shape: D Shape
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• for OE number: 13 62 7 808 013
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-BM-002
• Manufacturer: NTY

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Number of pins: 3
• not for emission standard: Euro 3 (D3)
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of connectors: 3
• Weight [kg]: 0.09
• Name: SW 33 11 1698
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Fitting Position: after exhaust gas recirculation
• Number of pins: 2
• Connector Shape: oval
• Cable Length [mm]: 195
• Thread Size: M10x1.25
• Manufacturer: METZGER

• Engine Code: N57 D30 A
• Construction Year to: 06.2012
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Construction Year to: 06.2012
• Exhaust System: before turbocharger
• Pressure [Pa] from: 13,600
• Pressure [Pa] to: 400,000
• Manufacturer: NRF

• Construction Year from: 07.2009
• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles without SCR system
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: HEL
• Lisainfo: 6PP009409-021
• Additional information: 6PP009409-021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Manufacturer: JPN

• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles with urea injection (AdBlue®)
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV801

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 100,000
• Manufacturer: NRF

• Exhaust System: after soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV665

• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV873
• Manufacturer: ESEN SKV

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV350

• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DLP

Name: CZUJNIK CI—NIENIA SPALIN BMW 120D, X6 XDRIVE M50D 04-

• Alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 89.9
• Manufacturer: DELPHI
• Name: DE DPS00004

• Engine Code: N57 D30 A
• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur, heitgaasisurve
• Manufacturer: EPS

• Construction Year from: 07.2012
• Exhaust System: before turbocharger
• Connector Shape: oval
• Number of pins: 3
• for OE number: 13628507634
• Manufacturer: NRF

• Engine Code: N57 D30 A
• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Construction Year from: 07.2009
• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Mounting Type: Bolted
• Number of pins: 3
• Diameter 1 [mm]: 8
• Diameter 2 [mm]: 8
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009403421

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 13627805152
• Manufacturer: MEAT&DORIA

• for OE number: 13 62 8 507 634
• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Fabrication Number: ECS-BM-005
• Manufacturer: NTY

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of circuits: 1
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: N57 D30 A
• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles without SCR system
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.283
• Manufacturer: EPS

• Engine Code: N57 D30 A
• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles without SCR system
• Pressure from [kPA]: 10
• Pressure to [kPA]: 213
• Output Voltage, from [V]: 0.93
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Number of pins: 3
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles without urea injection (AdBlue®)
• not for emission standard: Euro 3 (D3)
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: N57 D30 A
• Number of pins: 3
• Pressure [Pa] from: 88,000
• Pressure [Pa] to: 202,000
• Manufacturer: FAE

• Alternatively:
• Number of connectors: 3
• Alternative Repair Kit: 551455
• Manufacturer: ERA

• Number of pins: 3, 1
• Connector Shape: oval
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Engine Code: N57 D30 A
• Construction Year to: 06.2012
• Exhaust System: before turbocharger
• Pressure from [kPA]: 14
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 3.643
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Engine Code: N57 D30 A
• Emission Standard: Euro 5
• not for vehicle configuration line / variant: Blue Performance
• Alternatively:
• Number of connectors: 3
• Connector Shape: D Shape
• Alternative Repair Kit: 551441
• Manufacturer: ERA

• Engine Code: N57 D30 A
• Construction Year to: 06.2012
• Exhaust System: before turbocharger
• Pressure from [kPA]: 14
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 3.643
• Manufacturer: FACET

• Fitting Position: before soot particulate filter
• Guarantee: 5 years guarantee
• Number of connectors: 2
• Number of pins: 3
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fitting Position: after soot particulate filter
• Guarantee: 5 years guarantee
• Number of connectors: 1
• Number of pins: 3
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Construction Year from: 07.2012
• Exhaust System: before turbocharger
• Number of pins: 3
• Opening pressure [kPa]: 100
• Name: CZUJNIK CI—N. SPALIN BMW 114D, X6 XDRIVE 40D 04-
• Manufacturer: DLP

• Vehicle Equipment: for vehicles with SCR system
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Construction Year to: 06.2012
• Number of pins: 3
• Pressure [Pa] from: 42,000
• Pressure [Pa] to: 502,000
• Manufacturer: FAE

• Engine Code: N57 D30 A
• Vehicle configuration line / variant: Blue Performance
• for facelift:
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• Fabrication Number: EGT-BM-026
• Fitting Position: before catalytic converter
• Cable Length [mm]: 975
• Number of pins: 2
• Manufacturer: NTY

• Construction Year from: 07.2012
• Block Separation:
• Oxygen Sensor: Diagnostic Probe, Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 530
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year from: 07.2012
• Block Separation:
• Oxygen Sensor: Diagnostic Probe, Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 540
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fabrication Number: EGT-BM-014
• Cable Length [mm]: 300
• Manufacturer: NTY

• Fitting Position: before exhaust turbocharger
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• not for emission standard: Euro 5
• Model Year to: 2012
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 400
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 13627808013
• Manufacturer: MEAT & DORIA

• Fabrication Number: EGT-BM-021
• Number of pins: 2
• Cable Length [mm]: 600
• Sensor Type: Closed-type Sensor
• Fitting Position: before catalytic converter
• Manufacturer: NTY

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• for OE number: 13 62 7 805 606
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Guarantee: 3 years guarantee
• Exhaust System: after soot particulate filter
• Socket colour: black
• Weight [kg]: 0.07
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV399

• not for emission standard: Euro 5
• Model Year to: 2012
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 380
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: N57 D30 A
• Construction Year from: 07.2009
• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 5
• Length [mm]: 500
• Name: Lambda andur
• Manufacturer: MAX

• Vehicle Equipment: for vehicles with urea injection (AdBlue®)
• Fitting Position: Pipe at EGR valve
• Cable Length [mm]: 105
• Overall Length [mm]: 683
• for OE number: 13628506995
• Socket colour: black
• Manufacturer: METZGER

• for facelift:
• Fitting Position: Exhaust Manifold
• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• Manufacturer: METZGER

• Engine Code: N57 D30 A
• Fitting Position: before soot particulate filter
• Number of pins: 2
• Guarantee: 3 years guarantee
• Version: AM
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV437

• Construction Year to: 07.2012
• Exhaust System: before soot particulate filter
• Cable Length [mm]: 215
• Number of pins: 2
• Name: CZUJNIK TEMP. SPALIN BMW 1, 2, 3 1,6-3,0 D 04-
• Manufacturer: DLP

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.18
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV424

• Construction Year to: 07.2012
• Block Separation:
• Construction Year from: 08.2012
• Cable Length [mm]: 300
• Number of pins: 2
• Name: CZUJNIK TEMP. SPALIN BMW 1, 2, 3 2,0-3,0 D 04-
• Manufacturer: DLP

Exhaust System: before catalytic converter, before soot particulate filter

• Construction Year from: 11.2008
• Construction Year to: 06.2012
• Oxygen Sensor: Diagnostic Probe, Heated
• Conductor Number: 5
• Length [mm]: 1,020
• Number of circuits: 5
• Resistor [Ohm]: 4.9
• Cable Length [mm]: 1,020
• Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Emission Standard: Euro 5
• Fitting Position: before catalytic converter
• Cable Length [mm]: 385
• Manufacturer: DELPHI
• Name: DE ES21067-12B1

• Oxygen Sensor: Broadband Oxygen Sensor
• Number of pins: 5
• Cable Length [mm]: 410
• Quality: OE EQUIVALENT
• for OE number: A0035427018
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Diagnostic Probe, Broadband Oxygen Sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 540
• Manufacturer: DELPHI ELEKTRONIKA

• Engine Code: N57 D30 A
• Fitting Position: before soot particulate filter
• Number of pins: 2
• Version: IAM
• Manufacturer: METZGER

• Engine Code: N57 D30 A
• Fitting Position: Particulate Filter
• Number of pins: 2
• Version: IAM
• Manufacturer: METZGER

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• not for emission standard: Euro 5
• Model Year to: 2012
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N57 D30 A
• Construction Year to: 06.2012
• Fitting Position: before catalytic converter
• Required quantity: 1
• Vehicle Equipment: for vehicles without SCR system
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.467
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: N57 D30 A
• Construction Year to: 06.2012
• Fitting Position: before catalytic converter
• Required quantity: 1
• Vehicle Equipment: for vehicles without SCR system
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: N57 D30 A
• Construction Year to: 06.2012
• Required quantity: 1
• Vehicle Equipment: for vehicles with SCR system
• Block Separation:
• Construction Year from: 07.2012
• Cable Length [mm]: 570
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.472
• Manufacturer: EPS

Fitting Position: after catalytic converter, before catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• not for emission standard: Euro 5
• Model Year to: 2012
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Name: SW 33 10 4087
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N57 D30 A
• Construction Year to: 06.2012
• Required quantity: 1
• Vehicle Equipment: for vehicles with SCR system
• Block Separation:
• Construction Year from: 07.2012
• Cable Length [mm]: 570
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Fitting Position: after catalytic converter, before catalytic converter Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Fitting Position: before soot particulate filter
• Oxygen Sensor: Broadband Oxygen Sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 400
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

• Construction Year to: 06.2012
• Emission Standard: Euro 5
• Length [mm]: 350
• Number of pins: 5
• Connector Shape: D Shape
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Construction Year from: 11.2008
• Construction Year to: 06.2012
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Emission Standard: Euro 6
• Number of circuits: 5
• Overall Length [mm]: 380
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS