• Length [mm]: 66
• Number of connectors: 2
• Manufacturer: JP GROUP A/S
• Lisainfo: Sensor, exterior temperature
• Additional information: Sensor, exterior temperature

• Fitting Position: Front Axle Left, Front Axle Right
• Construction Year from: 10.2009
• Brake Type: Disc Brake
• Length [mm]: 1,194

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Active sensor
• Manufacturer: JP GROUP A/S
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Number of pins: 2
• Material: Plastic
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Cable Length [mm]: 845
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Length [mm]: 70
• Housing Colour: black
• Manufacturer: KAMOKA

• Cable Length [mm]: 830
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Cylinder Head
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Fabrication Number: ECT-BM-002
• Manufacturer: NTY

• Supplementary Article/Info 2: without sensor, without cable
• Supplementary Article/Supplementary Info: with socket housing
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 1
• Vehicle Equipment: for vehicles with automatic climate control
• Number of pins: 2
• Fabrication Number: ECT-BM-003
• Manufacturer: NTY

• Supplementary Article/Info 2: with cable
• Number of pins: 2
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV679

• Colour: black
• Fabrication Number: ECT-BM-001
• Manufacturer: NTY

• Fitting Position: Front
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• Thread Size: M12x1.5
• for OE number: 13627797957
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Number of pins: 2
• Thread Size: M12 x 1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: both sides, Front, Rear, inner, Centre, outer
• Fabrication Number: EPDC-BM-002
• Manufacturer: NTY
• Name: NTY EPDC-BM-002

• Fitting Position: both sides, Front, Rear, inner
• Fabrication Number: EPDC-BM-018
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-BM-030
• Manufacturer: NTY

• Fitting Position: Front Axle
• Length [mm]: 920
• Cable Length [mm]: 880
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Colour: black
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV417
• Manufacturer: ESEN SKV

• Fitting Position: outer, Rear, Front, inner
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Shape: angled
• Colour: black
• Fabrication Number: EPDC-BM-008
• Manufacturer: NTY

• Thread Size: M 12x125
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Fitting Position: Front, Rear
• Voltage [V]: 12
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV086

• Engine Code: N57 D30 A
• Thread Size: M12x1,5
• Manufacturer: FACET

• Fitting Position: Left, Right
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: MM SDP013
• Manufacturer: MAGNETI MARELLI

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Length [mm]: 66
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.004
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left, Right, inner, Front, Rear
• Construction Year from: 11.2008
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV014

• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Socket colour: black
• Manufacturer: FAE

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-BM-003
• Manufacturer: NTY

• Construction Year from: 07.2009
• Thread Size: M12x1,5
• Number of pins: 2
• Mounting Type: Screw Connection
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT013113241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N57 D30 A
• Thread Size: M12x1,5
• Manufacturer: EPS

• Engine Code: N57 D30 A
• Thread Size: M12x1,5
• Spanner Size: 17
• Name: EP 1.830.375
• Manufacturer: EPS

• for OE number: 13 62 7 804 742, 89420 WA010
• Number of pins: 3
• Pressure from [kPA]: 27
• Pressure to [kPA]: 400
• Fabrication Number: ECM-BM-000
• Manufacturer: NTY

• Fitting Position: Left, Right, inner, Front, Rear
• Construction Year from: 11.2008
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV071

• Number of pins: 2
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Housing Colour: black
• Fitting Position: Cylinder Head
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: N57 D30 A
• Name: EP 1.994.038
• Manufacturer: EPS

• Construction Year to: 06.2012
• Fitting Position: Rear Axle
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV359

• Number of connectors: 2
• Weight [kg]: 0.007
• Manufacturer: FEBI
• Additional information: FE171622
• Lisainfo: FE171622

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 70
• External Thread Size: M12 x 1,5
• Bolt Head-/Nut Design: Male Star
• Number of connectors: 2
• Material: Plastic
• Screw length below head [mm]: 45
• Weight [kg]: 0.01
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• Length [mm]: 70
• External Thread Size: M12 x 1,5
• Bolt Head-/Nut Design: Male Star
• Number of connectors: 2
• Material: Plastic
• Screw length below head [mm]: 45
• Weight [kg]: 0.01
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Charge Air Cooler
• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: rectangular
• Colour: black
• Power [W]: 0.06
• Manufacturer: METZGER

• Length [mm]: 70
• External Thread Size: M12 x 1,5
• Bolt Head-/Nut Design: Male Star
• Number of connectors: 2
• Material: Plastic
• Screw length below head [mm]: 45
• Weight [kg]: 0.01
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: SW 20 93 7032
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Name: DE SS12009-12B1
• Manufacturer: DELPHI

• Length [mm]: 985
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 880
• Weight [kg]: 0.05
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Manufacturer: MAHLE
• Packaging height [cm]: 1
• Packaging length [cm]: 10
• Packaging width [cm]: 12
• Net Weight [g]: 7
• Name: MH ASE27000P

General Information: PREMIUM LINE - OE Quality for customers expecting the optimum

• Height [mm]: 28.4
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year from: 07.2009
• Number of pins: 2
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009109351

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 985
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 880
• Weight [kg]: 0.05
• Name: SW 20 10 3279
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Cable Length [mm]: 880
• Sensor Type: Active sensor
• Fitting Depth [mm]: 31
• Number of connectors: 2
• Manufacturer: ERA

• Number of connectors: 3
• Fabrication Number: ECS-BM-007
• Manufacturer: NTY

• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-BM-001
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Thread Size: 12 mm
• Manufacturer: VERNET

• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: METZGER

Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Overall Length [mm]: 970
• Length [mm]: 31
• Sensor Type: Active sensor
• Socket colour: black
• Cable Length [mm]: 865
• paired article number: 31225
• Weight [kg]: 0.09
• Manufacturer: ABS

• Fitting Position: both sides
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• for OE number: 66 20 2 180 495
• Chemical Properties: Paintable
• Length [mm]: 75
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Construction Year from: 09.2010
• Construction Year to: 02.2014
• for OE number: 36106790054, 36106856227, 36106874829
• Guarantee: 3 years guarantee
• Frequency Range [MHz]: 433
• Programmed:
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

Specification: Combi Programmable, Complete Unit, For 1 Wheel, Sensor and Valve, TPMS Sensor

• Length [mm]: 66
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.004
• Name: SW 20 92 6015
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Fabrication Number: ECS-BM-003

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV351

• Number of pins: 3
• Connector Shape: oval
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for OE number: 13627803093
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11221

• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles without SCR system
• Connector Shape: D Shape
• Number of pins: 3
• Manufacturer: NRF

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• for OE number: 13 62 7 808 013
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-BM-002
• Manufacturer: NTY

• Number of pins: 3
• Pressure from [kPA]: 50
• Name: DE PS20078-12B1
• Manufacturer: DELPHI

• Length [mm]: 69
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• not for emission standard: Euro 3 (D3)
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 66
• Material: Plastic
• Number of connectors: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 3
• Weight [kg]: 0.09
• Name: SW 33 11 1698
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: after exhaust gas recirculation
• Number of pins: 2
• Connector Shape: oval
• Cable Length [mm]: 195
• Thread Size: M10x1.25
• Manufacturer: METZGER

• for OE number: 34 52 6 853 859
• Fitting Position: Front Axle both sides
• Manufacturer: TRUCKTEC

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Construction Year to: 06.2012
• Exhaust System: before turbocharger
• Pressure [Pa] from: 13,600
• Pressure [Pa] to: 400,000
• Manufacturer: NRF