• Weight [kg]: 0.043
• Outer Diameter [mm]: 28
• Inner Diameter [mm]: 13
• Height [mm]: 20.5
• Manufacturer: 3RG

• Material: Rubber/Metal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 20.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 28
• Material: Rubber/Metal
• Fitting Position: Front
• Weight [kg]: 0.044
• Name: PUKS,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Name: PUKS,PIKIVOLL
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Quantity per packing unit: 5
• Length [mm]: 20.5
• Material: Rubber/Metal
• Outer Diameter [mm]: 28
• Inner Diameter [mm]: 14
• Weight [kg]: 0.052
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear
• Length [mm]: 20
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 28
• Mounting Type: hard version
• Weight [kg]: 0.031
• Name: PUKS,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Bolt Hole Circle Ø [mm]: 96
• Material: Rubber/Metal
• Number of Holes: 6
• Fitting Position: Front
• for OE number: 26 11 7 511 454
• Outer Diameter [mm]: 135
• Inner Diameter [mm]: 50
• Thickness [mm]: 30
• Name: LIIGEND,PIKIVOLL
• Manufacturer: MAX

• for OE number: 26 11 7 511 454
• Fitting Position: Front
• Thickness [mm]: 30
• Material: Rubber/Metal
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 135
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 96
• Observe service information:
• Fabrication Number: NPE-BM-005
• Manufacturer: NTY

• Fabrication Number: NPE-BM-001
• Manufacturer: NTY

Lisainfo: Läbimõõt 110 mm Välis läbimõõt peab olema 140 mm ja poltide tsentrid105 mm. OE kood 26117610061 Additional information: Läbimõõt 110 mm Välis läbimõõt peab olema 140 mm ja poltide tsentrid105 mm. OE kood 26117610061

• Fitting Position: Front
• for OE number: 12 20 843
• Manufacturer: GSP

• for OE number: 26 11 7 511 454
• Joint Type: Flexible Joint Disc
• Name: Liigend,pikivoll
• Manufacturer: TRU

• Thickness [mm]: 30
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 135
• Bolt Hole Circle Ø [mm]: 96
• Number of Holes: 6
• Manufacturer: 3RG

• Transmission Type: Automatic Transmission
• Fitting Position: Rear
• Supplementary Article/Supplementary Info: without fastening/mounting material
• Joint Type: Flexible Joint Disc
• Quantity Unit: Piece
• Name: LIIGEND,PIKIVOLL
• Manufacturer: MAX

• Engine Code: N47 D20 A
• Transmission Type: Automatic Transmission
• Joint Type: Flexible Joint Disc
• Number of Holes: 6
• Fitting Position: Front
• Outer Diameter [mm]: 135
• Bolt Hole Circle Ø [mm]: 96
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Manual Transmission
• Fitting Position: Front and Rear
• Supplementary Article/Supplementary Info: without fastening/mounting material
• Joint Type: Flexible Joint Disc
• Name: LIIGEND,PIKIVOLL
• Manufacturer: MAX
• Lisainfo: 49-0969
  Läbimõõt 140 mm
• Additional information: 49-0969
  Läbimõõt 140 mm

• Required quantity: 1
• Material: Rubber/Metal
• Bolt Hole Circle Ø [mm]: 96
• Weight [g]: 611
• Thickness [mm]: 30
• Outer Diameter [mm]: 135
• Inner Diameter 1 [mm]: 50
• Inner Diameter 2 [mm]: 96
• Number of Holes: 6
• Name: IM 2439
• Manufacturer: ORIGINAL IMPERIUM

• Fabrication Number: NPE-BM-013
• Manufacturer: NTY

• Outer Diameter [mm]: 135
• Inner Diameter [mm]: 50
• Thickness [mm]: 30
• Bolt Hole Circle Ø [mm]: 96
• Notches/Holes Number: 6
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front, Rear
• for OE number: 26 11 7 546 425
• Manufacturer: GSP

• Fitting Position: Front
• Joint Type: Flexible Joint Disc
• Number of mounting bores: 6
• Bolt Hole Circle Ø [mm]: 96
• Thickness [mm]: 30
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 135
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 773000410

• for OE number: 26 11 7 610 061
• Joint Type: Flexible Joint Disc
• Name: LIIGEND,PIKIVOLL
• Manufacturer: TRU

• Weight [kg]: 0.975
• Fitting Position: Rear, Rear Axle
• Bolt Hole Circle Ø [mm]: 96
• Required quantity: 1
• Inner Diameter [mm]: 50
• Name: Liigend,pikivoll
• Manufacturer: TED
• Additional information: TED11299
• Lisainfo: TED11299

• Engine Code: N47 D20 A
• Transmission Type: Automatic Transmission
• Joint Type: Flexible Joint Disc
• Number of Holes: 6
• Fitting Position: Rear
• Outer Diameter [mm]: 126
• Bolt Hole Circle Ø [mm]: 96
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear, Front
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Joint Type: Flexible Joint Disc
• Weight [kg]: 1.443
• Bolt Hole Circle Ø [mm]: 105
• Required quantity: 1
• Inner Diameter [mm]: 55
• Name: Liigend,pikivoll
• Manufacturer: TED

• Engine Code: N47 D20 A
• Fitting Position: Rear
• Transmission Type: Manual Transmission
• Joint Type: Flexible Joint Disc
• Number of Holes: 6
• Outer Diameter [mm]: 143
• Bolt Hole Circle Ø [mm]: 105
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front and Rear
• Thickness [mm]: 41
• Weight [kg]: 0.97
• Inner Diameter [mm]: 54
• Outer Diameter [mm]: 140
• Bolt Hole Circle Ø [mm]: 105
• Manufacturer: METALCAUCHO

• Fitting Position: Rear
• Weight [kg]: 0.67
• Outer Diameter [mm]: 126
• Bolt Hole Circle Ø [mm]: 96
• Weight [g]: 670
• Manufacturer: METALCAUCHO

• Transmission Type: Automatic Transmission
• Thickness [mm]: 30
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 132
• Bolt Hole Circle Ø [mm]: 96
• Material: Rubber/Metal
• Number of Holes: 6
• Weight [kg]: 0.49
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter [mm]: 50
• Weight [kg]: 1
• Required quantity: 1
• Name: LIIGEND,PIKIVOLL
• Manufacturer: TED

• Transmission Type: Automatic Transmission
• Thickness [mm]: 30
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 132
• Bolt Hole Circle Ø [mm]: 96
• Material: Rubber/Metal
• Number of Holes: 6
• Weight [kg]: 0.49
• for OE number: 26 11 7 511 454
• Observe service information:
• Name: SW 20 86 0007
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Transmission Type: for automatic transmission
• Diameter [mm]: 132
• Supplementary Article/Supplementary Info: without fastening/mounting material
• Joint Type: Flexible Joint Disc
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 96
• Quantity Unit: Piece
• Name: LIIGEND,PIKIVOLL
• Manufacturer: MEY
• Lisainfo: 3141523102/HD
• Additional information: 3141523102/HD

General Information: MEYLE-HD flex discs with higher durability thanks to reduced inner friction, optimised and innovative winding technique as well as improved thrust and traction characteristics.

• Transmission Type: Automatic Transmission
• Outer Diameter [mm]: 126
• Bolt Hole Circle Ø [mm]: 96
• Number of Holes: 6
• Fitting Position: Rear
• Weight [kg]: 0.635
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 04.2013
• Transmission Type: Automatic Transmission
• Length [mm]: 61
• Thickness [mm]: 30
• Inner Diameter [mm]: 50
• Outer Diameter [mm]: 135, 132
• Bolt Hole Circle Ø [mm]: 96
• Material: Rubber/Metal
• Number of Holes: 6
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Front
• Thread Size: M12 x 1,5
• Weight [kg]: 0.73
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N 47
• Transmission Type: Automatic Transmission
• Height [mm]: 30
• Weight [kg]: 0.63
• Outer Diameter [mm]: 126
• Bolt Hole Circle Ø [mm]: 96
• Joint Type: Flexible Joint Disc
• Supplementary Article/Supplementary Info: without fastening/mounting material
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear
• Required quantity: 1
• Bolt Hole Circle Ø [mm]: 96
• Weight [g]: 747
• Outer Diameter [mm]: 126
• Name: IM 2493
• Manufacturer: ORIGINAL IMPERIUM

• Transmission Type: Automatic Transmission
• Outer Diameter [mm]: 126
• Bolt Hole Circle Ø [mm]: 96
• Number of Holes: 6
• Fitting Position: Rear
• Weight [kg]: 0.635
• Observe service information:
• Name: SW 20 92 6332
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Fitting Position: Rear
• Diameter [mm]: 125
• Supplementary Article/Supplementary Info: without fastening/mounting material
• Joint Type: Flexible Joint Disc
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 96
• Quantity Unit: Piece
• Name: Liigend,pikivoll
• Manufacturer: MEY

General Information: MEYLE-HD flex discs with optimised rubber compound tolerating temperatures up to 130°C. Enhanced performance thanks to reduced torque peaks, damping of wave length frequency and noise insulation.

• Transmission Type: Manual Transmission
• Fitting Position: Front
• Outer Diameter [mm]: 140
• Inner Diameter [mm]: 54
• Thickness [mm]: 41
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 6
• Manufacturer: CORTECO

• Transmission Type: Manual Transmission
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 6
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Front
• Weight [kg]: 1.4
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Fitting Position: Front and Rear
• Thickness [mm]: 41
• Inner Diameter [mm]: 54
• Outer Diameter [mm]: 140
• Bolt Hole Circle Ø [mm]: 105
• Hole Spacing [mm]: 64
• Outer Diameter 2 [mm]: 21
• Inner Diameter 2 [mm]: 12
• Weight [kg]: 0.921
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB
• Additional information: F26294
• Lisainfo: F26294

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front
• Transmission Type: for automatic transmission
• Diameter [mm]: 132
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Joint Type: Flexible Joint Disc
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 96
• Quantity Unit: Piece
• Name: LIIGEND,PIKIVOLL
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Construction Year to: 10.2010
• Vehicle Equipment: for vehicles with manual transmission
• Fitting Position: Front
• Diameter [mm]: 144
• Supplementary Article/Supplementary Info: without fastening/mounting material
• Joint Type: Flexible Joint Disc
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 105
• Quantity Unit: Piece
• Name: Liigend,pikivoll
• Manufacturer: MEY

General Information: MEYLE-HD flex discs with optimised rubber compound tolerating temperatures up to 130°C. Enhanced performance thanks to reduced torque peaks, damping of wave length frequency and noise insulation.

• Production date to: 201310
• Weight [kg]: 0.586
• Packaging length [cm]: 13.2
• Packaging width [cm]: 12.4
• Packaging height [cm]: 3
• Bolt Hole Circle Ø [mm]: 96
• Manufacturer: FEBEST

• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 6
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Rear
• Weight [kg]: 1.46
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB
• Lisainfo: 43527 FEBI
• Additional information: 43527 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Fitting Position: Front and Rear
• Thickness [mm]: 41
• Inner Diameter [mm]: 54
• Outer Diameter [mm]: 140
• Bolt Hole Circle Ø [mm]: 105
• Hole Spacing [mm]: 64
• Outer Diameter 2 [mm]: 21
• Weight [kg]: 0.921
• Inner Diameter 2 [mm]: 12
• Observe service information:
• Name: SW 20 92 6294
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Automatic Transmission
• Outer Diameter [mm]: 126
• Bolt Hole Circle Ø [mm]: 96
• Number of Holes: 6
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Rear
• Weight [kg]: 0.941
• for OE number: 26 11 7 527 392 S1
• Observe service information:
• Name: LIIGEND,PIKIVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 6
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Front
• Observe service information:
• Name: SW 20 94 3482
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 10.2010
• Vehicle Equipment: for vehicles with manual transmission
• Fitting Position: Front
• Diameter [mm]: 144
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Joint Type: Flexible Joint Disc
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 105
• Quantity Unit: Piece
• Name: Liigend,pikivoll
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Bolt Hole Circle Ø [mm]: 105
• Number of Holes: 6
• Supplementary Article/Supplementary Info: with nuts
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Rear
• Observe service information:
• Name: SW 20 94 3527
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: Manual Transmission
• Fitting Position: Front
• Diameter [mm]: 144
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Joint Type: Flexible Joint Disc
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 105
• Quantity Unit: Piece
• Name: Liigend,pikivoll
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Vehicle Equipment: for vehicles with automatic transmission
• Fitting Position: Rear
• Diameter [mm]: 144
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Joint Type: Flexible Joint Disc
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 105
• Quantity Unit: Piece
• Name: Liigend,pikivoll
• Manufacturer: MEY
• Lisainfo: 3141522113/HD
• Additional information: 3141522113/HD

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Transmission Type: Automatic Transmission
• Fitting Position: Rear
• Diameter [mm]: 125
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Joint Type: Flexible Joint Disc
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 96
• Quantity Unit: Piece
• Name: Liigend,pikivoll
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.