Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Oxygen Sensor: Regulating Sensor,
Switching- type Oxygen Sensor - Construction Year from: 04.1993
- Engine Code: M60 B40
- Voltage [V]: 12
- Length [mm]: 730
- Number of circuits: 4
- Weight [kg]: 0.12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
- Construction Year from: 05.1994
-
Oxygen Sensor: Regulating Sensor,
Heated -
Transmission Type: Automatic Transmission,
Manual Transmission - Block Separation:
- Construction Year to: 04.1994
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Oxygen Sensor: Regulating Sensor
- Manufacturer: ASHIKA
-
Lisainfo: 43-
U04 -
Additional information: 43-
U04
- Construction Year from: 04.1993
- Transmission Type: Manual Transmission
-
Oxygen Sensor: Regulating Sensor,
Heated - Fitting Position: before catalytic converter
-
Engine Code: M60 B40
(408S1) - Number of circuits: 4
- Length [mm]: 540
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Construction Year from: 05.1994
- Transmission Type: Fully Automatic
- Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
- Length [mm]: 870
- Number of circuits: 4
- Weight [kg]: 0.15
- Resistor [Ohm]: 6
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Oxygen Sensor: Regulating Sensor
- Manufacturer: JAPKO
- Construction Year from: 04.1994
-
Oxygen Sensor: Heated,
Regulating Sensor -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Fitting Position: before catalytic converter
- Cable Length [mm]: 582
- Weight [kg]: 0.104
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Oxygen Sensor: Regulating Sensor
- Construction Year from: 04.1993
- Construction Year to: 09.1993
- Exhaust System: before catalytic converter
- Voltage [V]: 12
- Length [mm]: 480
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV057
-
Oxygen Sensor: Regulating Sensor,
Switching- type Oxygen Sensor - Construction Year from: 04.1993
- Engine Code: M60 B40
- Voltage [V]: 12
- Length [mm]: 730
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV026
-
Oxygen Sensor: Regulating Sensor,
Switching- type Oxygen Sensor - Construction Year from: 05.1994
- Exhaust System: before catalytic converter
- Voltage [V]: 12
- Length [mm]: 830
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.11
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV031
- Manufacturer: ESEN SKV
- Fitting Position: Left
- Construction Year from: 04.1994
-
Exhaust System: for pre-
catalytic converter - Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Manufacturer Restriction: DENSO
- Quality: OE
- Weight [g]: 103
- Gross Weight [g]: 152
- Manufacturer: DENSO
-
Name: DN DOX-
0118 - Quality class: Q
Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor
Additional information: "Tootja: DENSO
3 (E30), 09.82-03.92
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
3 (E30), 09.82-03.92
(kvaliteediklass: Q)"
- Construction Year from: 04.1994
-
Oxygen Sensor: Heated,
Regulating Sensor -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Fitting Position: before catalytic converter
- Cable Length [mm]: 582
- Weight [kg]: 0.104
- Name: SW 33 10 4084
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 04.1993
- Transmission Type: Manual Transmission
- Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
- Length [mm]: 800
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.19
- Resistor [Ohm]: 2.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV587
- Manufacturer: ESEN SKV
- Construction Year from: 04.1993
- Transmission Type: Manual Transmission
-
Oxygen Sensor: Regulating Sensor,
Finger- type Sensor, Heated -
Engine Code: M60 B40
(408S1) - Cable Length [mm]: 630
- Manufacturer: DELPHI
-
Name: DE ES10254-
12B1
- Construction Year from: 05.1994
- Transmission Type: Fully Automatic
- Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
- Length [mm]: 870
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.15
- Resistor [Ohm]: 6
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Construction Year from: 05.1994
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
-
Transmission Type: Automatic Transmission,
Manual Transmission - Block Separation:
- Construction Year to: 04.1994
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Fitting Position: before catalytic converter
-
Transmission Type: Manual Transmission,
Automatic Transmission - Block Separation:
- Production date to: 31.03.1994
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 4
- Length [mm]: 550
- Connector Shape: round
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 405
- for OE number: 11 78 1 730 005
-
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 10.1993
- Quantity: 2
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Oxygen Sensor: Planar Sensor,
Heated, Thread pre- greased - Supplementary Article/Info 2: without plug
- Cable Length [mm]: 210
- Number of circuits: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Length [mm]: 350
- Number of pins: 4
- Technical Information Number: Universal 77004
- Manufacturer: FAE
- Additional information: MD77243
- Lisainfo: MD77243
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Cable Length [mm]: 570
- Number of circuits: 4
- Manufacturer: ERA
- Construction Year from: 05.1994
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Transmission Type: Manual Transmission
- Block Separation:
- Construction Year to: 04.1994
- Number of circuits: 4
- Overall Length [mm]: 570
- Available as universal article as well, see article no.: 0258986503
-
Recommended change interval [km]: 100,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Construction Year from: 04.1993
- Engine Code: M60B40
- Transmission Type: Manual Transmission
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 4
- Connector Shape: round
-
Thread Size: M18 x 1,
5 - Overall Length [mm]: 570
- Number of pins: 4
-
Recommended change interval [km]: 100,
000 -
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks