• Transmission Type: Automatic Transmission
• Fitting Position: Left
• Oxygen Sensor: Diagnostic Probe
• Number of circuits: 4
• Cable Length [mm]: 600
• Manufacturer: JP GROUP
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• for OE number: 13 62 7 525 014
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Number of mounting bores: 1
• Fabrication Number: ECP-BM-005
• Manufacturer: NTY

• Engine Code: N63 B44 A
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: N63 B44 A
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Number of connectors: 2
• Manufacturer: ERA

• Colour: black
• Number of pins: 4
• Fabrication Number: ECM-BM-008
• Manufacturer: NTY

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV494

• Thread Size: M12x1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1362 7 585 493
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Number of mounting bores: 2
• Fabrication Number: ECM-BM-009
• Manufacturer: NTY

• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Overall Length [mm]: 560
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-BM-011
• Manufacturer: NTY

• Required quantity: 4
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. BMW 1 E81
• Manufacturer: BRM

• Engine Code: N63 B44 A
• Required quantity: 4
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Right, Left
• Fitting Depth [mm]: 28
• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 12
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: oval
• Colour: black
• Name: SN CMP162.02
• Manufacturer: SNR

• Required quantity: 1
• Construction Year from: 05.2012
• Name: CZUJNIK CI—N. POWIETRZA BMW 3 E90 3,0 06-
• Manufacturer: BRM

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaablita
• Anduritüüp: Hallsensor
• Kinnitusaukude hulk: 1
• Installatsiooni sügavus (mm): 28
• OE-numbri jaoks: 13627525014
• Manufacturer: MEAT & DORIA

• Number of pins: 3
• Fitting Position: High Pressure Pump (high pressure side)
• Fabrication Number: EFP-BM-006
• Manufacturer: NTY
• Name: NTY EFP-BM-006

• Fabrication Number: EPP-BM-020
• Manufacturer: NTY

• Transmission Type: Automatic Transmission
• Fitting Position: Left
• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Colour: black
• Number of pins: 2
• Manufacturer: VDO

• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• for OE number: 13 62 7 525 014
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRU

• Engine Code: N63 B44 A
• Required quantity: 4
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: EPS

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Engine Code: N63 B44 A
• Required quantity: 4
• Manufacturer: FACET

• Required quantity: 2
• Number of pins: 4
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gasket/seal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009403241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550604
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Engine Code: N63 B44 A
• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Number of pins: 3
• Housing Colour: black
• Sensor Type: Hall Sensor
• Manufacturer: VDO

• valikuliselt:
• Pistikkontaktide arv: 4
• Pistikukatte kuju: ovaalne
• alternatiivne remondikomplekt: 550600
• Manufacturer: ERA

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 9
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Required quantity: 4
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Ühenduste arv: 4
• Kaal (kg): 0,01
• OE-numbri jaoks: 13 62 8 644 432
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 4
• Number of pins: 3
• Fitting Depth [mm]: 27.8
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Construction Year from: 05.2012
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 4
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: Andur,ohuvotu rohk
• Manufacturer: HEL
• Lisainfo: 6PP358152-381
• Additional information: 6PP358152-381

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 06.2013
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Length [mm]: 49
• Number of connectors: 3
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ühenduste arv: 4
• Kaal (kg): 0,01
• OE-numbri jaoks: 13 62 8 644 432
• Name: SW 33 10 8051
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV597

• Required quantity: 4
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N63 B44 A
• Construction Year from: 05.2012
• Pressure from [kPA]: 10
• Pressure to [kPA]: 256
• Output Voltage, from [V]: 0.318
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: N63 B44 A
• Construction Year to: 04.2012
• Pressure from [kPA]: 10
• Pressure to [kPA]: 256
• Output Voltage, from [V]: 0.318
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: N63 B44 A
• Pressure from [kPA]: 10
• Pressure to [kPA]: 123
• Output Voltage, from [V]: 0.296
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• for OE number: 13 62 7 585 493
• Manufacturer: TRUCKTEC

• Fitting Position: Left
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 06.2013
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Cable Length [mm]: 614
• Manufacturer: DELPHI
• Name: DE ES20368-12B1

• Construction Year from: 10.2011
• Construction Year to: 06.2013
• Supplementary Article/Info 2: Low Pressure Side
• Fuel Mixture Formation: Manifold Injection/Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 450
• Quality: OE EQUIVALENT
• for OE number: 368256
• Name: Lambda andur
• Manufacturer: MD

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year to: 04.2012
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 560
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Construction Year to: 04.2012
• Supplementary Article/Info 2: without cable
• Pressure [Pa] from: 40,000
• Pressure [Pa] to: 200,000
• Voltage [V]: 5
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009400051
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Construction Year from: 05.2012
• Construction Year to: 06.2013
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 560
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: N63 B44 A
• Rakendustüüp: elektriline
• Pinge [V]: 12
• Manufacturer: PIERBURG

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Number of pins: 9
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV424

• Construction Year to: 06.2013
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 500
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Korpusetüüp: ilma korpuseta
• Pistikkontaktide arv: 5
• Pistikute teostus: Male
• Korpusevärv: must/hõbe
• Pinge [V]: 12
• soovitatav remondimahtu suurendamine: Õhufilter
• Name: DE AF10421-12B1
• Manufacturer: DELPHI

• Construction Year to: 06.2013
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS

• Transmission Type: Automatic Transmission
• Colour: black
• Operating Mode: Electric
• Number of pins: 6
• Material: Plastic
• Supplementary Article/Info 2: with holding frame
• Manufacturer: METZGER

• Required quantity: 4
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: with seal ring