Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 25
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 22
- Thickness [mm]: 1.5
- Material: Copper
- Shape: A Shape
- DIN/ISO: 7603
- Alternative Repair Kit: 017.655
- Manufacturer: ELRING
- Quantity per packing unit: 25
- Outer Diameter [mm]: 22
- Thickness [mm]: 1.5
- Material: Copper
- Inner Diameter [mm]: 18
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 1.4
- Inner Diameter [mm]: 18
- Outer Diameter [mm]: 22
- DIN/ISO: 7603
- Material: Copper
- Weight [kg]: 0.001
- Manufacturer: FEBI
- Quantity per packing unit: 100
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M18x1,
5 - Length [mm]: 12
- Additionally required articles (article numbers): 905.330.100
- Manufacturer: FA1 FISCHER
DIN standards (Screws): DIN 908 (screw plugs with collar and internal drive)
- Quantity per packing unit: 10
-
Thread Size: M12 x 1,
5 - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Thread Size: M18x1,
5 - Length [mm]: 12
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FA1 FISCHER
DIN standards (Screws): DIN 908 (screw plugs with collar and internal drive)
- Outer Diameter [mm]: 22
- Inner Diameter [mm]: 18
- Thickness [mm]: 1.5
- Material: Copper
- Packing Type: Blister Pack
- Manufacturer: CORTECO USZCZELKI
- Quantity per packing unit: 2
-
Thread Size: M12 x 1,
5 - Screw length below head [mm]: 16
- Bolt Head-/Nut Design: Male Hex
- Spanner Size: 17
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Quantity per packing unit: 10
- Siseläbimõõt [mm]: 18
- Välisläbimõõt [mm]: 22
-
Jämedus/Tugevus (mm): 1,
5 -
Kuju: A-
kuju - Materjal: Vask
- valikuliselt:
- Manufacturer: FISCHER
- Length [mm]: 16
- Outer Diameter [mm]: 23
-
External Thread Size: M18 x 1,
5 - Spanner Size: 8
- Bolt Head-/Nut Design: Hexagon Socket
- DIN/ISO: 908
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 12
- Weight [kg]: 0.029
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI
- Quantity per packing unit: 5
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 16
-
Thread Size: M 18 x 1,
5 x 12 - Packing Type: Blister Pack
- Supplementary Article/Info 2: with seal ring
- Name: COU 220158S
- Manufacturer: CORTECO
-
Thread Size: M18x1,
5x12 - Bolt Head-/Nut Design: Hexagon Socket
- Supplementary Article/Info 2: with seal ring
- Manufacturer: ELRING
- for OE number: N 016 029 3
-
Thread Size: M18 x 1,
5 - Manufacturer: TRUCKTEC
-
Thread Size: M18x1,
5x12 - Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 8 mm
- Alternative Repair Kit: 877.870
- Supplementary Article/Info 2: without seal ring
- Manufacturer: ELRING
- Length [mm]: 16
- Outer Diameter [mm]: 23
-
External Thread Size: M18 x 1,
5 - Spanner Size: 8
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 12
- Weight [kg]: 0.04
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 5
- Length [mm]: 16
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 10.5
- Quality/ Grade: 6.8
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 11
- Weight [kg]: 0.016
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 16
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 10.5
- Quality/ Grade: 6.8
- Spanner Size: 17
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Zink flake coated
- Screw length below head [mm]: 11
- Weight [kg]: 0.016
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Manufacturer: BGA
- Quantity per packing unit: 100
- Siseläbimõõt [mm]: 18
- Välisläbimõõt [mm]: 22
-
Jämedus/Tugevus (mm): 1,
5 -
Kuju: A-
kuju - Materjal: Vask
- Manufacturer: FISCHER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks