• Vehicle Equipment: for vehicles without SCR system
• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-BM-001

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• for OE number: 13 62 7 808 013
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-BM-002
• Manufacturer: NTY

• Number of connectors: 3
• Fabrication Number: ECS-BM-007
• Manufacturer: NTY

• Number of pins: 3
• Fabrication Number: ECS-BM-003
• Manufacturer: NTY

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV351

• Construction Year from: 05.2009
• Exhaust System: before soot particulate filter
• Engine Code: M57 D30 (306D3)
• Connector Shape: D Shape
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Construction Year to: 04.2009
• Exhaust System: before soot particulate filter
• Engine Code: M57 D30 (306D3)
• Pressure [Pa] from: 10,000
• Pressure [Pa] to: 212,700
• Manufacturer: NRF

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Number of pins: 3
• not for emission standard: Euro 3 (D3)
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: N57 D30 A
• Number of connectors: 3
• Fitting Position: after soot particulate filter
• Weight [kg]: 0.09
• Name: SW 33 11 1698
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Engine Code: N57 D30 A
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Construction Year to: 04.2009
• Exhaust System: before soot particulate filter
• Engine Code: M57D306D3
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: HEL
• Lisainfo: 6PP009409-021
• Additional information: 6PP009409-021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Exhaust System: before turbocharger
• Engine Code: N57 D30 A
• Surve alates (Pa): 13 600
• Surve (Pa) kuni: 400 000
• Manufacturer: NRF

• Output Voltage [V]: 5
• Pressure from [kPA]: 97
• Number of connectors: 4
• Number of mounting bores: 1
• Rated Voltage [V]: 5
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Connector Shape: oval
• Colour: black
• Name: SN EGP150.01
• Manufacturer: SNR

• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles with urea injection (AdBlue®)
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV801

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Engine Code: N57 D30 A
• Number of pins: 3
• Pressure [Pa] from: 0
• Pressure [Pa] to: 100,000
• Manufacturer: NRF

• Engine Code: N57 D30 A
• Exhaust System: after soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV665

• Engine Code: N57 D30 A
• Number of pins: 3
• Manufacturer: JPN

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV350

• Exhaust System: before turbocharger
• Number of pins: 3
• Opening pressure [kPa]: 42
• Manufacturer: DLP

Name: CZUJNIK CI—N. SPALIN BMW 116D, 118D, X6 XDRIVE 40D 04-

• Output Voltage [V]: 5
• Pressure from [kPA]: 100
• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 5
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Connector Shape: oval
• Colour: black
• Name: SN EGP150.03
• Manufacturer: SNR

• Construction Year from: 05.2009
• Guarantee: 5 years guarantee
• Number of connectors: 3
• Manufacturer: HUCO
• Name: HU 137417

• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DLP

Name: CZUJNIK CI—NIENIA SPALIN BMW 120D, X6 XDRIVE M50D 04-

• Output Voltage [V]: 5
• Pressure from [kPA]: 502
• Number of connectors: 3
• Number of mounting bores: 3
• Rated Voltage [V]: 5
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Connector Shape: oval
• Colour: black
• Name: SN EGP150.04
• Manufacturer: SNR

• Engine Code: N57 D30 A
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Name: Andur, heitgaasisurve
• Manufacturer: EPS

• alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 89.9
• Manufacturer: DELPHI
• Name: DE DPS00004

• Engine Code: N57 D30 A
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Output Voltage, from [V]: 0.5
• Output Voltage, up to [V]: 4.5
• Manufacturer: FACET

• Exhaust System: before soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Engine Code: N57D30A
• Mounting Type: Bolted
• Number of pins: 3
• Diameter 1 [mm]: 8
• Diameter 2 [mm]: 8
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009403421

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• for OE number: 13627805152
• Manufacturer: MEAT&DORIA

• Engine Code: N57 D30 A
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles without SCR system
• Surve alates [kPA]: 10
• Surve kuni [kPA]: 213
• Väljundpinge alates [V]: 0,93
• Väljundpinge kuni [V]: 4,75
• Manufacturer: FACET

• Number of pins: 3
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles without urea injection (AdBlue®)
• not for emission standard: Euro 3 (D3)
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of circuits: 1
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 215
• Fitting Position: before catalytic converter
• Manufacturer: DENCKERMANN ELEKTRONIKA CEWKI CZUJNIKI

• Engine Code: N57 D30 A
• Fitting Position: before exhaust turbocharger
• Pressure from [kPA]: 14
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 3.643
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Engine Code: N57 D30 A, M57 D30 (306D3)
• Fitting Position: after soot particulate filter
• Block Separation:
• Construction Year from: 05.2009
• Alternatively:
• Number of connectors: 3
• Connector Shape: D Shape
• Alternative Repair Kit: 551441
• Manufacturer: ERA

• Engine Code: N57 D30 A
• Fitting Position: before exhaust turbocharger
• Pressure from [kPA]: 14
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 3.643
• Manufacturer: FACET

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-BM-024
• Manufacturer: NTY

• Pistikkontaktide arv: 3
• Surve alates (Pa): 42 000
• Surve (Pa) kuni: 502 000
• Manufacturer: FAE

• Engine Code: N57 D30 A
• Fitting Position: after soot particulate filter
• Guarantee: 5 years guarantee
• Number of connectors: 1
• Number of pins: 3
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fabrication Number: EGT-BM-026
• Fitting Position: before catalytic converter
• Cable Length [mm]: 975
• Number of pins: 2
• Manufacturer: NTY

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 13627808013
• Manufacturer: MEAT&DORIA

• Vehicle Equipment: for vehicles with SCR system
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Required quantity: 1
• Fitting Position: before catalytic converter
• Engine Code: M57 D30 (306D3)
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Fitting Depth [mm]: 25
• Cable Length [mm]: 210
• Socket colour: black
• Spanner Size: 12
• Thread Size: M12x1.25
• Manufacturer: NRF

• Engine Code: N57 D30 A
• Construction Year from: 04.2010
• Construction Year to: 06.2013
• Emission Standard: Euro 6
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 530
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Voltage [V]: 12
• Cable Length [mm]: 232
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Depth [mm]: 24
• Cable Length 1 [mm]: 210
• Number of connectors: 2
• Thread Size: M12x1,25-6h
• Spanner Size 1 [mm]: 14
• Tightening Torque [Nm]: 45
• Rated Voltage [V]: 5
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 850
• Sensor Type: NTC Sensor
• Connector Shape: oval
• Line insulation design: with silicone insulation
• Mounting Type: Plugged
• Name: SN EGT150.12
• Manufacturer: SNR

• Engine Code: N57 D30 A
• Construction Year from: 04.2010
• Construction Year to: 06.2013
• Emission Standard: Euro 6
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 540
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fabrication Number: EGT-BM-021
• Number of pins: 2
• Cable Length [mm]: 600
• Sensor Type: Closed-type Sensor
• Fitting Position: before catalytic converter
• Manufacturer: NTY

• Fitting Position: before exhaust turbocharger
• Engine Code: N57 D30 A
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Engine Code: N57 D30 A
• not for emission standard: Euro 6
• Model Year from: 2010
• Block Separation:
• Oxygen Sensor: Diagnostic Probe, Regulating Sensor
• Voltage [V]: 12
• Cable Length [mm]: 380
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

Fitting Position: after catalytic converter, before catalytic converter

• Vehicle Equipment: for vehicles with SCR system
• Required quantity: 1
• Engine Code: N57 D30 A
• Block Separation:
• Cable Length [mm]: 950
• Number of pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

Fitting Position: before catalytic converter, before soot particulate filter

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Engine Code: N57 D30 A
• Vehicle Equipment Line/Variant: Blue Performance
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• Exhaust System: before catalytic converter
• Quantity: 1
• Engine Code: M57 D30 (306D3)
• Cable Length [mm]: 215
• Number of pins: 2
• Name: DE TS30042-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 500
• Number of pins: 6
• Manufacturer: FAE

• Engine Code: N57 D30 A
• Fitting Position: Pipe at EGR valve
• Cable Length [mm]: 105
• Overall Length [mm]: 683
• for OE number: 13628506995
• Socket colour: black
• Manufacturer: METZGER

• Vehicle Equipment: for vehicles with SCR system
• Quantity: 1
• Block Separation:
• Cable Length [mm]: 470
• Manufacturer: DELPHI ELEKTRONIKA

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Broadband Oxygen Sensor, Heated Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV407

• Engine Code: N57 D30 A
• for facelift:
• Fitting Position: before soot particulate filter
• Number of pins: 2
• Guarantee: 3 years guarantee
• Version: AM
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV437

• Engine Code: N57 D30 A
• Fitting Position: after soot particulate filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Exhaust System: after soot particulate filter
• Vehicle Equipment: for vehicles with SCR system
• Quantity: 1
• Cable Length [mm]: 215
• Number of pins: 2
• Name: CZUJNIK TEMP. SPALIN BMW 1, 2, 3 1,6-3,0 D 04-
• Manufacturer: DLP

• Exhaust System: before catalytic converter
• Vehicle Equipment: for vehicles without SCR system
• Quantity: 1
• Cable Length [mm]: 300
• Number of pins: 2
• Name: DE TS30366-12B1
• Manufacturer: DELPHI

• Fitting Position: before catalytic converter
• Required quantity: 1
• Engine Code: M57D306D3
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 240
• Assy./disassy. by qualified personnel required!:
• Name: CZUJNIK TEMP. SPALIN BMW X5, 3 2,0-3,0 D 03-
• Manufacturer: HEL

• Construction Year from: 04.2010
• Construction Year to: 06.2013
• Oxygen Sensor: Diagnostic Probe, Heated
• Number of circuits: 5
• Length [mm]: 420
• Resistor [Ohm]: 4.9
• Conductor Number: 5
• Cable Length [mm]: 420
• Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Vehicle Equipment: for vehicles without SCR system
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 385
• Manufacturer: DELPHI
• Name: DE ES21067-12B1

• Oxygen Sensor: Broadband Oxygen Sensor
• Number of pins: 5
• Cable Length [mm]: 410
• Quality: OE EQUIVALENT
• for OE number: A0035427018
• Manufacturer: MEAT&DORIA

• Engine Code: N57 D30 A
• Fitting Position: Particulate Filter
• Number of pins: 2
• Version: IAM
• Manufacturer: METZGER

• Engine Code: N57 D30 A
• Required quantity: 1
• Vehicle Equipment: for vehicles with SCR system
• Length [mm]: 470
• Block Separation:
• Cable Length [mm]: 450
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.468
• Manufacturer: EPS

Fitting Position: before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: N57 D30 A
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Heated
• not for emission standard: Euro 6
• Model Year from: 2010
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

Fitting Position: before catalytic converter, after catalytic converter General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Engine Code: N57 D30 A, M57D306D3/N57D30A
• Fitting Position: before catalytic converter
• Required quantity: 1
• Vehicle Equipment: for vehicles without SCR system
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.467
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: N57 D30 A, M57D306D3/N57D30A
• Fitting Position: before catalytic converter
• Required quantity: 1
• Vehicle Equipment: for vehicles without SCR system
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: N57 D30 A
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Heated
• not for emission standard: Euro 6
• Model Year from: 2010
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Name: SW 33 10 4087
• Manufacturer: SWAG

Fitting Position: before catalytic converter, after catalytic converter General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N57D30A
• Required quantity: 1
• Vehicle Equipment: for vehicles with SCR system
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 450
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Weight [kg]: 0.15
• Manufacturer: VALEO
• Name: VA 368402

Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated

• Fitting Position: before soot particulate filter
• Oxygen Sensor: Broadband Oxygen Sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 400
• Number of pins: 6
• Name: Lambda andur
• Manufacturer: MEY

• Construction Year from: 04.2010
• Manufacturer Restriction: nicht Euronorm 6
• Length [mm]: 350
• Number of pins: 5
• Connector Shape: D Shape
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Engine Code: N57 D30 A
• Construction Year from: 04.2010
• Construction Year to: 06.2013
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Emission Standard: Euro 6
• Number of circuits: 5
• Overall Length [mm]: 470
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 04.2010
• Engine Code: N57 D30 A
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Construction Year from: 04.2010
• Engine Code: N57 D30 A
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Code: N57 D30 A
• Construction Year from: 04.2010
• Construction Year to: 06.2013
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 420
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: N57 D30 A
• Construction Year from: 04.2010
• Construction Year to: 06.2013
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• not for emission standard: Euro 6
• Number of circuits: 5
• Overall Length [mm]: 380
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS