Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: N57 D30 A
-
Thread Size: M18x1,
5 - Thread Length [mm]: 11
- Spanner Size: 8 mm
- Wrench Profile: Hexagon Socket
- Name: Sulgurkruvi
- Manufacturer: FIS
- Engine Code: N57 D30 A
- Length [mm]: 17
- Outer Diameter [mm]: 24
-
External Thread Size: M18 x 1,
5 - Thread Length [mm]: 9
- Quality/ Grade: 6.8
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 12
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Observe service information:
-
Name: SULGURKRUVI,
KIGUKASTI KORPUS - Manufacturer: FEB
- Quantity per packing unit: 5
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: N57 D30 A
- Length [mm]: 17
- Outer Diameter [mm]: 24
-
External Thread Size: M18 x 1,
5 - Thread Length [mm]: 9
- Quality/ Grade: 6.8
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 12
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 10 0514
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: N57 D30 A
- Length [mm]: 17
- Outer Diameter [mm]: 24
-
External Thread Size: M18 x 1,
5 - Thread Length [mm]: 9
- Quality/ Grade: 6.8
- Bolt Head-/Nut Design: Hexagon Socket
- Material: Steel
-
Surface: Zinc-
coated - Screw length below head [mm]: 12
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: M57 D30
(306D3) -
Transmission Type: 6-
Speed Automatic Transmission - Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 0.05
- Name: CE 96SKV414
- Manufacturer: ESEN SKV
- Always compare old and new part (in particular OE No.):
- Plug housing design: Bush Housing
-
Name: Pistiku kest,
automaatkigukasti juhtpult - Manufacturer: DRM
-
Transmission Type: 8-
Speed Automatic Transmission - for OE number: 24 14 7 588 896 n.cp
-
Transmission Code: 8HP45/
50/ 70/ 75/ 90/ 95 - Manufacturer: TRU
Name: OBUDOWA WTYCZKI STEROWNIKA AUTO. SKRZ. BIEG. BMW 1 F20 1,5-3,0 11-
- Material: Steel
-
Thread Size: M18x1,
5 - Length [mm]: 17.2
- Screw length below head [mm]: 12
- Thread Length [mm]: 9
- Bolt Head-/Nut Design: Hexagon Socket
- Spanner Size: 8
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Seal Material: NBR
(nitrile butadiene rubber) - Manufacturer: METZGER
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 0.05
- Manufacturer: SKV GERMANY
- Name: CE 96SKV415
-
Engine Code: M57 D30
(306D3) -
Transmission Type: 6-
Speed Automatic Transmission - Length [mm]: 49
- Width [mm]: 42
- Thickness [mm]: 42
- Colour: black
- Material: Plastic
- Weight [kg]: 0.02
- Observe service information:
-
Name: Juhtseade,
autom.kigukast - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: M57 D30
(306D3) -
Transmission Type: 6-
Speed Automatic Transmission - Material: Plastic
- Weight [kg]: 0.024
- Observe service information:
-
Name: Pistiku kest,
automaatkigukasti juhtpult - Manufacturer: FEB
- Lisainfo: 101968 FEBI
- Additional information: 101968 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Code: 8HP50Z,
8HP70Z, 8HP90Z, 8HP45Z -
Transmission Type: 8-
Speed Automatic Transmission - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Pistiku kesta tüüp: Pistikukorpus
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Name: DRM 01731
Lühiinformatsioon: Always compare old and new part (in particular OE No.)
-
Engine Code: M57 D30
(306D3) -
Transmission Type: 6-
Speed Automatic Transmission - Material: Plastic
- Weight [kg]: 0.024
- Name: SW 20 10 1968
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Transmission Code: ZF 8HP
-
Transmission Type: 8-
Speed Automatic Transmission - Required quantity: 1
- Plug Type: Round Connector Sleeve
- Plug housing design: Bush Housing
- Fitting Position: transmission sided
-
Name: Pistiku kest,
automaatkigukasti juhtpult - Manufacturer: MEY
- Required quantity: 1
- Plug Type: Round Plug
- Plug housing design: Bush Housing
- Fitting Position: transmission sided
-
Name: PISTIKU KEST,
AUTOMAATKIGUKASTI JUHTPULT - Manufacturer: MEY
-
Lisainfo: 3009300001/
S -
Additional information: 3009300001/
S
-
Supplementary Article/Info 2: without bolts/
screws -
Supplementary Article/Supplementary Info: with gaskets/
seals, without accessories -
Transmission Code: 8HP45Z,
8HP70Z, 8HP90Z, 8HP50Z, 8HP75Z -
Transmission Type: 8-
Speed Automatic Transmission - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks