• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: -40, 150
• Thread Size: M12x1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system
• Additional information: Temperature sensor for cooling system

• Length [mm]: 48
• Spanner Size: 22
• Fitting Position: Cylinder Head
• Housing Colour: black
• Manufacturer: KAMOKA

• Fabrication Number: ECT-BM-011
• Manufacturer: NTY

• Pistikkontaktide arv: 2
• Materjal: Plastik
• Pistikukatte kuju: ovaalne
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: AB 120-00-054
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Info 2: without sensor, without cable
• Supplementary Article/Supplementary Info: with socket housing
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Upper
• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Pistiku värv: must
• Võtmekaugus: 22
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 13621433076
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Spanner Size: 22
• Colour: black
• Fitting Position: Cylinder Head
• Number of pins: 2
• Thread Size: M12x1,5
• Length [mm]: 49
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Fitting Position: Upper
• Thread Size: M12x1.5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Number of pins: 2
• Fabrication Number: ECT-BM-008
• Manufacturer: NTY

• Pistikkontaktide arv: 2
• Seerianumber: ECT-BM-004
• Manufacturer: NTY

• Fitting Position: Upper
• Pistikukatte kuju: ristkülik
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: S22
• Keermemõõt: M12*1,5
• Name: NI 207088
• Manufacturer: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Housing Colour: black
• Number of pins: 2
• Thread Size: M12*1.5
• Spanner Size: 17
• Manufacturer: DLP

Name: CZUJNIK TEMP. PYNU CHODZ¤CEGO BMW 3 (E90), 1 (F21) 1,5-3,0 06-

• Number of pins: 2
• Fabrication Number: ECT-BM-006
• Manufacturer: NTY

• Fitting Position: Upper
• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 22
• Manufacturer: DELPHI
• Name: DE TS10270

• Length [mm]: 49
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 49
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.028
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N55 B30 A
• Fitting Position: Upper
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 22
• Colour: black
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Pistikkontaktide arv: 2
• Installatsiooni pool: Õhukanal
• Pistikukatte kuju: ristkülik
• Seerianumber: ECT-BM-009
• Manufacturer: NTY

• Length [mm]: 48.5
• External Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of connectors: 2
• Colour: black
• Fitting Position: Cylinder Head
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 20 92 9344
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV341
• Manufacturer: ESEN SKV

• Fabrication Number: ECT-BM-014
• Manufacturer: NTY

• Engine Code: N55 B30 A
• Fitting Position: Upper
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: EWS-BM-136
• Manufacturer: NTY

• Engine Code: N55 B30 A
• Fitting Position: Upper
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of pins: 2
• Manufacturer: ERA

• Fitting Position: Upper
• Thread Size: M12x1,5
• Spanner Size: 22
• Sensor Type: NTC Sensor
• Number of pins: 2
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107851
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Pistikukatte kuju: ristkülik
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Pistikkontaktide arv: 2
• Korpusevärv: must
• Manufacturer: FAE

• Thread Size: M12x1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Manufacturer Restriction: BMW, Ford, Hyundai, Kia
• Cable Length [mm]: 300
• Number of pins: 2
• Cable Cross Section [mm²]: 0.5
• Socket Width [mm]: 0.64
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: WI¤ZKA ELEKTRYCZNA CZUJNIK ZU½YCIA KLOC. HAM. 2 PRZEW.

• Engine Code: N55 B30 A
• Fitting Position: Lower
• Thread Size: M12x1,5
• Spanner Size: 17
• Name: EP 1.830.405
• Manufacturer: EPS

• Engine Code: N55 B30 A
• Fitting Position: Lower
• Thread Size: M12x1,5
• Spanner Size: 17
• Manufacturer: FACET

• Number of pins: 2
• Connector Shape: rectangular
• Mounting Type: Pressed
• for OE number: 64119116269
• Manufacturer: MEAT&DORIA

• Fabrication Number: ECC-CT-000
• Manufacturer: NTY
• Name: NTY ECC-CT-000

• Värv: must
• Pistikkontaktide arv: 2
• Manufacturer: FAE

• Thread Size: M12x1,5
• Manufacturer: FAE ELEKTRYKA

• Pistikkontaktide arv: 3
• Anduritüüp: Hallsensor
• Kaablipikkus (mm): 128
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6PU009168861
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Manufacturer Restriction: für 3. Sitzreihe, am Kaltluftverteiler
• Number of pins: 2
• Manufacturer: METZGER

• Engine Code: N55 B30 A
• Thread Size: M12x1,5
• Spanner Size: 24
• Name: EP 1.980.001
• Manufacturer: EPS

• Engine Code: N55 B30 A
• Thread Size: M12x1,5
• Spanner Size: 24
• Manufacturer: FACET

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Length [mm]: 66
• Material: Plastic
• Supplementary Article/Supplementary Info: with holder, with shrink squeeze connector
• Number of pins: 2
• Supplementary Article/Info 2: with cable, with a plug
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• for OE number: 12 61 7 607 910
• Name: CZUJNIK POZIOMU OLEJU BMW 1 E82 3,0 08-
• Manufacturer: MAX

• for manufacturer number: 1040007
• Manufacturer: KAMOKA

• for manufacturer number: 1040009
• Manufacturer: KAMOKA

• Number of pins: 3
• Connector Shape: D Shape
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Number of mounting bores: 3
• Weight [kg]: 0.18
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV628
• Manufacturer: ESEN SKV

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.2
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV761
• Manufacturer: ESEN SKV

• Number of pins: 3
• Rated Voltage [V]: 12
• Follow installation instructions:
• Connector Shape: D Shape
• Number of mounting bores: 3
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: VEMO GERMANY

General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

• Pistikkontaktide arv: 3
• Pistikukatte kuju: D-kuju
• Kinnitusaukude hulk: 3
• OE-numbri jaoks: 12617607910
• Name: Andur,Mootoriolitase
• Manufacturer: MD

• Number of pins: 3
• Voltage [V]: 12
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.