• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 16
• Thread Size: M8x1,25
• Thread Type: with external thread
• Spanner Size: Hex-6
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M8x1.25 16,0mm Hex-6 2tk
• Additional information: M8x1.25 16,0mm Hex-6 2tk

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: JP GROUP

• Fitting Position: Front Axle
• Brake System: ATE
• Manufacturer: JP GROUP A/S

• Construction Year from: 03.2010
• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Warning Contact Length [mm]: 1,002
• Required quantity: 1
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Thread Size: M8 x 1,25
• Length [mm]: 15
• Bolt Head-/Nut Design: Hexagon Socket
• Fitting Position: Front Axle both sides, Rear Axle both sides
• Quantity Unit: Set
• Quantity: 2
• Quality/ Grade: 8,8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity per packing unit: 2
• Thread Size: M8 x 14
• Observe the vehicle manufacturer specifications:
• Manufacturer: METZGER

• Brake System: ATE
• Fitting Position: Rear Axle
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: Ate
• Name: Lisakomplekt,Pidurisadul
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2920A
• Additional information: D42920A
• Lisainfo: D42920A

• Fitting Position: Rear Axle
• Brake System: Ate
• Manufacturer: AUTOFREN SEINSA
• Additional information: D42483A
• Lisainfo: D42483A

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK
• Additional information: QB109-1695
• Lisainfo: QB109-1695

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: TRW
• Length [mm]: 1,100
• Supplementary Article/Supplementary Info: Axle Kit
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: QBK

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Length [mm]: 15.7
• Thread Size: M8X1,25
• Material: Steel
• Surface: Chrome-(VI)- free passivation
• Bolt Head-/Nut Design: Hexagon Socket
• Available as universal article as well, see article no.: TPM1000
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Required quantity: 1
• Construction Year from: 03.2010
• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Length [mm]: 1,002
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Required quantity: 1
• Construction Year from: 03.2010
• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Length [mm]: 977
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right, Front Axle
• Brake Type: Disc Brake
• Length [mm]: 965
• Fabrication Number: HCZ-BM-006
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,002
• Fabrication Number: HCZ-BM-010
• Manufacturer: NTY

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Length [mm]: 938
• Fabrication Number: HCZ-BM-007
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Required quantity: 1
• Construction Year to: 02.2010
• Brake Type: Disc Brake
• Manufacturer: DENCKERMANN HAMULCE

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Fabrication Number: HCZ-BM-069
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 977
• Fabrication Number: HCZ-BM-011
• Manufacturer: NTY

• Brake System: ATE
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 965
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• for OE number: 34 35 6 772 008
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• for OE number: 34 35 6 771 766
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Front Axle Left
• Required quantity: 1
• Brake Type: Disc Brake
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Brake Type: Disc Brake
• Fitting Position: Front Axle Left
• Warning Contact Length [mm]: 938
• Manufacturer: JPN

• Fitting Position: Front Axle, Front Axle Left
• Engine Code: M57 D30 (306D3)
• Brake Type: Disc Brake
• Length [mm]: 965
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Engine Code: M57 D30 (306D3)
• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Length [mm]: 1,025
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Construction Year from: 03.2010
• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Required quantity: 1
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: MAX

• Required quantity: 1
• Fitting Position: Front Axle Left, Front Axle
• Brake Type: Disc Brake
• Length [mm]: 938
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,050
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Fitting Position: Front Axle
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Version: with elec park brake
• for brake disc diameter [mm]: 320
• Fitting Position: Rear Axle
• Brake System: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901695

• Fitting Position: Front Axle
• Brake System: TRW
• Length 1 [mm]: 1,110
• Brake Type: Disc Brake
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0331
• Quality class: PJ

• Fitting Position: Front Axle
• Brake System: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2915A
• Additional information: D42915A
• Lisainfo: D42915A

• Fitting Position: Front Axle
• Brake System: ATE
• Length 1 [mm]: 953
• Brake Type: Disc Brake
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LZ0207
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Brake System: ATE
• Weight [kg]: 0.07
• Manufacturer Restriction: ATE
• Manufacturer: ABS

• Fitting Position: Front Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Length [mm]: 960
• Weight [kg]: 0.05
• Number of wear indicators [per axle]: 1
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Brake System: ATE
• Length 1 [mm]: 1,024
• Brake Type: Disc Brake
• Name: DE LZ0208
• Manufacturer: DELPHI
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Brake Type: Disc Brake
• Length [mm]: 965
• Fitting Position: Rear Axle Right, Rear Axle Left
• for OE number: 34356771766
• Manufacturer: MEAT&DORIA

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 348
• Brake Type: Disc Brake
• Manufacturer Restriction: ATE
• Length [mm]: 965
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 985
• Weight [kg]: 0.05
• Number of wear indicators [per axle]: 1
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Manufacturer Restriction: ATE
• Length [mm]: 1,025
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,047
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO
• Name: BR A 00 434

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 1,020
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0273A

• Fitting Position: Rear Axle
• Brake System: ATE
• Quantity per packing unit: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: Brake pads fitting kit
• Quality class: PJ

Additional information: "Tootja: DELPHI
5 TOURING (E61), 06.
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
5 TOURING (E61), 06.
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 985
• Manufacturer: LUCAS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Brake Type: Disc Brake
• Length [mm]: 895
• Number of wear indicators [per axle]: 1
• Name: BR A 00 442
• Manufacturer: BREMBO

• Engine Code: 30 6D 3
• Fitting Position: Front Axle
• Length [mm]: 965
• Brake Type: Disc Brake
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,006
• Weight [kg]: 0.04
• Number of wear indicators [per axle]: 1
• Manufacturer: ABS

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 965
• Supplementary Article/Supplementary Info: Axle Kit
• Name: QB WS0269A
• Manufacturer: QUICK BRAKE

• Engine Code: 30 6D 3
• Fitting Position: Rear Axle
• Length [mm]: 1,025
• Brake Type: Disc Brake
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.029
• Warning Contact Length [mm]: 1,047
• Manufacturer: TOMEX C

• Fitting Position: Rear Axle
• Fabrication Number: HCA-BM-039
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Brake Type: Disc Brake
• Length [mm]: 985
• Packaging length [cm]: 26
• Packaging width [cm]: 15
• Packaging height [cm]: 1
• Weight [kg]: 0.045
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX
• Lisainfo: 96990-0444
• Additional information: 96990-0444

• Construction Year from: 03.2010
• Required quantity: 1
• Fitting Position: Rear Axle
• Warning Contact Length [mm]: 1,010
• Brake Type: Disc Brake
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.033
• Warning Contact Length [mm]: 985
• Manufacturer: TOMEX C

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: METZGER

• Construction Year from: 03.2010
• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,002
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 1,020
• Packaging length [cm]: 26
• Packaging width [cm]: 12.5
• Packaging height [cm]: 1
• Weight [kg]: 0.041
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• for brake disc diameter [mm]: 348
• Fitting Position: Front Axle
• Brake System: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901759

• Construction Year to: 02.2010
• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 965
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Required quantity: 1
• Fitting Position: Front Axle Left
• Brake Type: Disc Brake
• Length [mm]: 938
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Front Axle Left
• for brake disc diameter [mm]: 348
• Fabrication Number: HTO-BM-032
• paired article number: HTO-BM-033
• Manufacturer: NTY
• Name: NTY HTO-BM-032

• Fitting Position: Front Axle Right
• for brake disc diameter [mm]: 348
• Fabrication Number: HTO-BM-033
• paired article number: HTO-BM-032
• Manufacturer: NTY
• Name: NTY HTO-BM-033

• Fitting Position: Front Axle
• Brake System: ATE
• Weight [kg]: 0.19
• Manufacturer: ABS

• Construction Year from: 03.2010
• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 977
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 590
• Socket colour: black
• Manufacturer: JP GROUP A/S

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Active sensor
• Length [mm]: 1,020
• Socket colour: black
• Manufacturer: JP GROUP A/S

• Fitting Position: Front Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: CZUJNIK ABS BMW P. X5, X5 M, XDRIVE M50D 06- LE/PR
• Manufacturer: DLP

• Fitting Position: Front Axle Right
• Colour: silver
• Outer Diameter [mm]: 396
• Inner Diameter [mm]: 348
• Material: Aluminium
• paired article number: 131-07-135
• Article number of recommended accessories: 231-03-115
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 131-07-136

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 2
• Fitting Position: Rear Axle
• Length [mm]: 985
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 565
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: DE SS21025-12B1
• Manufacturer: DELPHI

• Fitting Position: Front Axle Left
• Colour: silver
• Outer Diameter [mm]: 396
• Inner Diameter [mm]: 348
• Material: Aluminium
• paired article number: 131-07-136
• Article number of recommended accessories: 231-03-115
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Fitting Position: Front Axle Left
• Material: Aluminium
• for brake disc diameter [mm]: 348
• Manufacturer: KAMOKA

• Fitting Position: Left, Front Axle
• for brake disc diameter [mm]: 348
• Name: CFD 610330
• Manufacturer: DACO

• Fitting Position: Front Axle Right
• Material: Aluminium
• for brake disc diameter [mm]: 348
• Manufacturer: KAMOKA