Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Transmission Code: 8HP45,
8HP45 HIS, 8HP45 XHIS - Alternative Repair Kit: 1087.298.365
- Quality: ZF LifeguardFluid 8
-
Additionally required articles (article numbers): S671.090.310,
S671.090.311, S671.090.312 - Supplementary Article/Supplementary Info: without oil
-
Name: Osade komplekt,
olivahetus- automaatkigukast - Manufacturer: ZF
SVHC: No information available, please contact the manufacturer!
-
Supplementary Article/Supplementary Info: without oil,
with gasket/ seal - Recommended change interval [years]: 5
-
Recommended change interval [km]: 80,
000 - Alternatively:
- Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
- Quantity Unit: Set
- Weight [kg]: 2.071
- Manufacturer: VAICO
Transmission Code: ZF 6HP28, 6HP26, 6HP26 X, 6HP28 X, 6HP32, 6HP28, 6HP26Z Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Type: Automatic Transmission
- Transmission ID: GA6HP19Z
- Colour of operating fluid: yellow
- Capacity [litre]: 7
-
Supplementary Article/Info 2: with bolts/
screws, with a plug -
Specification: BMW ATF 2,
ATF M- 1375.4 - Weight [kg]: 8.934
- Observe service information:
-
Name: Osade komplekt,
olivahetus- automaatkigukast - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Code: ZF 6HP21,
6HP19, 6HP21 X, 6HP19 X, 6HP21, 6HP19Z -
Recommended change interval [km]: 80,
000 -
Supplementary Article/Supplementary Info: without oil,
with gasket/ seal - Recommended change interval [years]: 5
- Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
- Alternatively:
- Quantity Unit: Set
- Weight [kg]: 1.979
- Manufacturer: VAICO
Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Code: 8HP45,
8HP45 HIS, 8HP45 XHIS - Alternative Repair Kit: 1087.298.364
- Capacity [litre]: 7
- Quality: ZF LifeguardFluid 8
- Supplementary Article/Supplementary Info: contains complete oil change kit
-
Name: Osade komplekt,
olivahetus- automaatkigukast - Manufacturer: ZF
- Additional information: SAC1087.298.365
- Lisainfo: SAC1087.298.365
SVHC: No information available, please contact the manufacturer!
-
Transmission Code: ZF 6HP21,
6HP21 X, 6HP19, 6HP19 X, 6HP21, 6HP19Z - Recommended change interval [years]: 5
-
Recommended change interval [km]: 80,
000 - See accessories list for additionally required parts:
- Capacity [litre]: 7
- Quantity Unit: Set
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [kg]: 10.656
- Manufacturer: VAICO
Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission Supplementary Article/Info 2: with oil quantity for standard oil change, with seal ring General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Recommended change interval [km]: 80,
000 - Recommended change interval [years]: 5
- Capacity [litre]: 11
- See accessories list for additionally required parts:
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Supplementary Article/Info 2: with seal ring,
with oil quantity for oil flushing - Quantity Unit: Set
- Weight [kg]: 12.91
- Manufacturer: VAICO
Transmission Code: ZF 6HP28, 6HP26, 6HP28, 6HP28 X, 6HP32, 6HP26 X, 6HP26Z Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Code: ZF 6HP21,
6HP21 X, 6HP21, 6HP19, 6HP19 X, 6HP19Z - Recommended change interval [years]: 5
-
Recommended change interval [km]: 80,
000 - Capacity [litre]: 11
- See accessories list for additionally required parts:
-
Supplementary Article/Info 2: with oil quantity for oil flushing,
with seal ring -
Supplementary Article/Supplementary Info: with gasket/
seal - Quantity Unit: Set
- Weight [kg]: 14
- Manufacturer: VAICO
Transmission Type: Automatic Transmission, 6-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Recommended change interval [years]: 5
-
Recommended change interval [km]: 80,
000 - Capacity [litre]: 8
- See accessories list for additionally required parts:
-
Transmission Type: 8-
Speed Automatic Transmission - Quantity Unit: Set
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [kg]: 11.296
- Manufacturer: VAICO
Transmission Code: 8HP45, 8HP45 HIS, 8HP45 XHIS, 8HP70, 8HP45Z, 8HP75Z, 8HP50Z, 8HP70Z Supplementary Article/Info 2: with seal ring, with oil quantity for standard oil change General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks