• Colour: black
• Fabrication Number: ECT-BM-001
• Manufacturer: NTY

• Fabrication Number: ECP-BM-011
• Manufacturer: NTY

• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Number of pins: 2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV679

• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Engine Code: M57 D30 (306D5)
• Fitting Position: Cylinder Head
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: M57 D30 (306D5)
• Fitting Position: Cylinder Head
• Thread Size: M12x1,5
• Spanner Size: 22
• Manufacturer: FACET

• Number of pins: 2
• Colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Thread Size: M12x1,5, M 12x1,5
• Spanner Size: 22
• Connector Shape: angular
• Fitting Position: Cylinder Head
• Version: IAM
• Power [W]: 0.06
• Manufacturer: METZGER

• Housing Colour: black
• Number of pins: 2
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Number of pins: 2
• Housing Colour: black
• Name: Andur,sisendohu temperatuur
• Manufacturer: DLP

• Number of connectors: 2
• Manufacturer: ERA

• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M12x1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.2008
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: before soot particulate filter
• Manufacturer Restriction: BMW, Ford, Hyundai, Kia
• Cable Length [mm]: 300
• Number of pins: 2
• Cable Cross Section [mm²]: 0.5
• Socket Width [mm]: 0.64
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: WI¤ZKA ELEKTRYCZNA CZUJNIK ZU½YCIA KLOC. HAM. 2 PRZEW.

• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M57 D30 (306D5)
• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Seerianumber: ECM-BM-001
• Manufacturer: NTY

• for OE number: 13 62 7 787 192
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Number of connectors: 2
• Weight [kg]: 0.007
• Name: Andur,sisendohu temperatuur
• Manufacturer: FEB
• Additional information: FE171622
• Lisainfo: FE171622

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M57 D30 (306D5)
• Manufacturer: FACET

• Engine Code: M57 D30 (306D5)
• Voltage [V]: 12
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: D Shape
• Number of pins: 3
• Fitting Depth [mm]: 23.5
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Engine Code: M57 D30 (306D5)
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Fitting Position: Charge Air Cooler
• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: rectangular
• Colour: black
• Power [W]: 0.06
• Manufacturer: METZGER

• Number of pins: 2
• Colour: black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009109351

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Fabrication Number: ECS-BM-003
• Manufacturer: NTY

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Name: Andur,Nukkvollipositsioon
• Manufacturer: VAL

• Resistor [Ohm]: 13
• Height [mm]: 23.8
• Manufacturer: VERNET

• Thread Size: 12 mm
• Manufacturer: VERNET

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV351

• Number of pins: 2
• Housing Colour: black
• Connector Shape: rectangular
• Manufacturer: FAE

• Number of pins: 3
• Fitting Depth [mm]: 23.5
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

Manufacturer: MAGNETI MARELLI

• Number of pins: 3
• Manufacturer: FAE

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Fitting Position: Intake Manifold
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Number of connectors: 1
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• not for emission standard: Euro 3
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV659

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 2
• Connector Shape: rectangular
• Colour: black
• Sensor Type: NTC Sensor
• for OE number: 13627792203
• Manufacturer: MEAT&DORIA

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• for OE number: 13 62 7 792 256
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRU

• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ERA

• Output Voltage [V]: 5
• Pressure from [kPA]: 97
• Number of connectors: 4
• Number of mounting bores: 1
• Rated Voltage [V]: 5
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Connector Shape: oval
• Colour: black
• Name: SN EGP150.01
• Manufacturer: SNR

• Fitting Depth [mm]: 24
• Number of connectors: 3
• Number of mounting bores: 1
• Rated Voltage [V]: 12
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Sensor Type: Hall Sensor
• Connector Shape: D Shape
• Colour: black
• Name: SN CMP150.02
• Manufacturer: SNR

• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 23
• for OE number: 13627792256
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV350

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Colour: black
• Number of pins: 3
• Manufacturer: FAE

• Number of pins: 3
• Opening pressure [kPa]: 89.9
• Manufacturer: DELPHI
• Name: DE DPS00004

• for OE number: 13627805152
• Manufacturer: MEAT&DORIA

• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• not for emission standard: Euro 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121631

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of circuits: 1
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 215
• Fitting Position: before catalytic converter
• Manufacturer: DENCKERMANN ELEKTRONIKA CEWKI CZUJNIKI

• Alternatively:
• Number of connectors: 3
• Connector Shape: D Shape
• Alternative Repair Kit: 551441
• Manufacturer: ERA

• OE-numbri jaoks: 13 62 7 809 154
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ovaalne
• Värvimarkeering: valge/hall
• Pistiku värv: must
• Seerianumber: EGT-BM-003
• Kaablipikkus (mm): 260
• Manufacturer: NTY

• Number of pins: 3
• Fitting Depth [mm]: 23
• Version: IAM
• Manufacturer: METZGER

• Engine Code: M57 D30 (306D5)
• Manufacturer: FACET

• Fabrication Number: EGT-BM-017
• Voltage [V]: 12
• Number of pins: 2
• Fitting Position: after catalytic converter
• Manufacturer: NTY

• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-BM-000
• Manufacturer: NTY

• Voltage [V]: 12
• Cable Length [mm]: 282
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV106

• Voltage [V]: 12
• Cable Length [mm]: 232
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV105

• Fitting Position: before soot particulate filter
• Emission Standard: Euro 4
• Number of pins: 2
• Cable Length [mm]: 290
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Fitting Depth [mm]: 24
• Cable Length 1 [mm]: 260
• Number of connectors: 2
• Thread Size: M12x1,25-6h
• Spanner Size 1 [mm]: 14
• Tightening Torque [Nm]: 45
• Rated Voltage [V]: 5
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 850
• Sensor Type: NTC Sensor
• Connector Shape: oval
• Line insulation design: with silicone insulation
• Mounting Type: Plugged
• Name: SN EGT150.14
• Manufacturer: SNR

• Exhaust System: after catalytic converter
• Voltage [V]: 12
• Cable Length [mm]: 210
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 30SKV232
• Manufacturer: ESEN SKV

• Fabrication Number: EGT-BM-021
• Number of pins: 2
• Cable Length [mm]: 600
• Sensor Type: Closed-type Sensor
• Fitting Position: before catalytic converter
• Manufacturer: NTY

• Fitting Position: after catalytic converter
• not for emission standard: Euro 3 (D3)
• Required quantity: 1
• Thread Size: M12x1.25
• Colour Coding: white
• Cable Length [mm]: 232
• Number of pins: 2
• for OE number: 7809158
• Quality: OE
• Sensor Type: NTC Sensor
• Temperature range [°C]: -40, 800
• Weight [g]: 33
• Gross Weight [g]: 61
• Manufacturer: DENSO
• Name: DN DET-0110

• Engine Code: M57 D30 (306D5)
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.28
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Fitting Position: before catalytic converter
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• not for emission standard: Euro 3 (D3)
• Required quantity: 1
• Thread Size: M12x1.25
• Cable Length [mm]: 282
• Number of pins: 2
• for OE number: 7809154
• Quality: OE
• Sensor Type: NTC Sensor
• Temperature range [°C]: -40, 800
• Weight [g]: 35
• Gross Weight [g]: 63
• Manufacturer: DENSO

• Name: Andur, heitgaasitemperatuur
• Manufacturer: MAG

• Engine Code: M57 D30 (306D5)
• Country Specific Design: USA
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• Fitting Position: before catalytic converter
• Cable Length [mm]: 215
• Number of pins: 2
• Name: DE TS30042-12B1
• Manufacturer: DELPHI

• Fitting Position: before catalytic converter
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Required quantity: 1
• Thread Size: M12x1.25
• Cable Length [mm]: 232
• Number of pins: 2
• for OE number: 7809160
• Quality: OE
• Sensor Type: NTC Sensor
• Temperature range [°C]: -40, 800
• Weight [g]: 38
• Gross Weight [g]: 66
• Manufacturer: DENSO

• Fitting Position: before soot particulate filter
• Emission Standard: Euro 4
• Number of pins: 2
• Cable Length [mm]: 250
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 11.2007
• Engine Code: M57D30T2
• Length [mm]: 24.8
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring, without cable
• Shape: L Shape
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 23
• Connector Shape: D Shape
• Corresponds to the original part in colour: black
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.