Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
- Inner Diameter [mm]: 41
- Thickness [mm]: 4
-
Seal Material: FPM
(fluoride rubber) - Supplementary Article/Info 2: with groove
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: EPO-
BM- 010 - Manufacturer: NTY
-
Name: NTY EPO-
BM- 010
- Connector Shape: rectangular
- Thread Size: M12
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Pressure from [bar]: 0.2
- Pressure to [bar]: 0.2
- Name: OLISURVELLITUS
- Manufacturer: MAX
-
Material: FPM
(fluoride rubber) - Weight [kg]: 0.004
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Always compare old and new part (in particular OE No.):
-
Name: Rongastihend,
oli ravoolukruvi - Manufacturer: DRM
Brief Information: Always compare old and new part (in particular OE No.)
-
Name: Rongastihend,
mootorioli tasemeandur - Manufacturer: MAX
- Quantity per packing unit: 5
- Colour: red
- Manufacturer: ELRING
-
Engine Code: M57 D30
(306D3) - Spanner Size: 24
- Number of pins: 1
- Manufacturer: KAVO
-
Engine Code: M57 D30
(306D3) - Pressure [bar]: 0.3
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
-
Engine Code: M57 D30
(306D3) - Pressure [bar]: 0.3
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Manufacturer: FACET
- Connector Shape: rectangular
- Operating Mode: Hydraulic
- Thread Size: M 12
- Thread Pitch [mm]: 1.5
- Number of pins: 1
- Switch point from [bar]: 0.2
- Switch point to [bar]: 0.5
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Switch point from [bar]: 0.2
- Length [mm]: 41
- Switch point to [bar]: 0.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: black
- Connector Shape: angular
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M 12x1,
5 - Number of pins: 1
- Housing Colour: brown
- Manufacturer: FAE
- Length [mm]: 41
- Switch point from [bar]: 0.2
- Switch point to [bar]: 0.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: black
- Connector Shape: angular
- Weight [kg]: 0.034
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pressure from [bar]: 0.2
- Pressure to [bar]: 0.5
- Combi Switch Function: Normally Closed Contact
- Colour: brown
- Spanner Size: 24
-
Thread Size: M12 x 1,
5 - Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: MEY
- Pressure [bar]: 5
- Housing Colour: brown
- Thread Size: M12x1.5
- Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: DELPHI
- Name: DE SW90027
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
-
Thread Size: M 12 x 1,
5 - Pressure [bar]: 0.3
- for OE number: NUC100350
- Manufacturer: MEAT&DORIA
-
Thread Size: M12x1,
5 - Colour: brown
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pressure [bar]: 0.35
-
Thread Size: M12 x 1,
5 - Number of pins: 1
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
- Switch Pressure [bar]: 0.3
- Thread Size: M12x1.5
-
Sensor Type: Closed-
type Sensor - Manufacturer: VERNET
-
Thread Size: M12x1,
5 -
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for manufacturer number: 1040007
- Manufacturer: KAMOKA
- Number of pins: 3
- Connector Shape: D Shape
- Guarantee: 3 years guarantee
- Number of mounting bores: 3
- Weight [kg]: 0.18
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV628
- Number of pins: 3
- Connector Shape: D Shape
- Supplementary Article/Info 2: with seal ring
- Housing material: PA 66 GF 30
- Housing Colour: black
- Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of pins: 3
- Connector Shape: D Shape
- Number of mounting bores: 3
- for OE number: 12617607910
-
Name: Andur,
Mootoriolitase - Manufacturer: MD
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks