Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
Manufacturer: 3RG
-
Fabrication Number: EPO-
BM- 010 - Manufacturer: NTY
-
Material: FPM
(fluoride rubber) - Weight [kg]: 0.004
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Name: Rongastihend,
mootorioli tasemeandur - Manufacturer: MAX
- Quantity per packing unit: 5
- Colour: red
- Manufacturer: ELRING
- Engine Code: N62 B48 B
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: KAVO
- Engine Code: N62 B48 B
- Colour: brown
- Pressure to [bar]: 0.5
- Pressure from [bar]: 0.2
- Pressure [bar]: 0.3
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Engine Code: N62 B48 B
- Colour: brown
- Pressure to [bar]: 0.5
- Pressure from [bar]: 0.2
- Pressure [bar]: 0.3
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Manufacturer: FACET
- Always compare old and new part (in particular OE No.):
-
Name: Rongastihend,
oli ravoolukruvi - Manufacturer: DRM
Brief Information: Always compare old and new part (in particular OE No.)
-
Thread Size: M 12x1,
5 - Number of pins: 1
- Housing Colour: brown
- Manufacturer: FAE ELEKTRYKA
- Length [mm]: 41
- Switch point from [bar]: 0.2
- Switch point to [bar]: 0.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: black
- Connector Shape: angular
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Name: SW 20 23 0002
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Tightening torque from [Nm]: 50
- Voltage [V]: 12
- Combi Switch Function: Normally Closed Contact
- Current Strength [A]: 0.25
- Tolerance [%]: 10
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Pressure from [bar]: 0.2
- Pressure to [bar]: 0.5
- Number of pins: 1
- Corresponds to the original part in colour: brown
- Assy./disassy. by qualified personnel required!:
- Name: Olisurvellitus
- Manufacturer: HEL
- Length [mm]: 41
- Switch point from [bar]: 0.2
- Switch point to [bar]: 0.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: black
- Connector Shape: angular
- Weight [kg]: 0.034
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pressure from [bar]: 0.2
- Pressure to [bar]: 0.5
- Combi Switch Function: Normally Closed Contact
- Colour: brown
- Spanner Size: 24
-
Thread Size: M12 x 1,
5 - Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: MEY
- Switch Pressure [bar]: 0.3
- Thread Size: M12x1.5
-
Sensor Type: Closed-
type Sensor - Manufacturer: VERNET
-
Thread Size: M 12 x 1,
5 - Pressure [bar]: 0.3
- for OE number: NUC100350
- Manufacturer: MEAT&DORIA
- Pressure [bar]: 5
- Housing Colour: brown
- Thread Size: M12x1.5
- Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Manufacturer: DELPHI
- Name: oil pressure sensor
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Length [mm]: 41
- Switch point from [bar]: 0.2
- Switch point to [bar]: 0.5
-
External Thread Size: M12 x 1,
5 - Thread Length [mm]: 12
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: black
- Connector Shape: angular
- Weight [kg]: 0.03
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of pins: 1
- Pressure [bar]: 0.35
-
Thread Size: M 12 x 1,
5 - Colour: brown
- Version: Neue Version
- Manufacturer: METZGER
-
Thread Size: M12x1,
5 - Colour: brown
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pressure [bar]: 0.35
-
Thread Size: M12 x 1,
5 - Number of pins: 1
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
-
Thread Size: M12x1,
5 - Spanner Size: 24
- Pressure from [bar]: 0.2
- Pressure to [bar]: 0.5
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Housing Colour: brown
- Assy./disassy. by qualified personnel required!:
- Name: HE 6ZL009600271
- Manufacturer: HELLA
-
Thread Size: M12x1,
5 -
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 3
-
Fabrication Number: EPO-
BM- 002 - Manufacturer: NTY
-
Name: NTY EPO-
BM- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
- Connector Shape: D Shape
- Number of mounting bores: 3
- for OE number: 12 61 7 607 910
-
Name: CZUJNIK POZIOMU OLEJU BMW 1 E82 3,
0 08- - Manufacturer: MAX
- for manufacturer number: 1040007
- Manufacturer: KAMOKA
- Number of pins: 3
- Connector Shape: D Shape
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Number of pins: 3
- Connector Shape: D Shape
- Guarantee: 3 years guarantee
- Number of mounting bores: 3
- Weight [kg]: 0.18
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV628
- Manufacturer: ESEN SKV
- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Kinnitusaukude hulk: 3
- OE-numbri jaoks: 12617607910
-
Name: Andur,
Mootoriolitase - Manufacturer: MD
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks