Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Filter type: Filter Insert
- Height [mm]: 103
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 77
-
Supplementary Article/Supplementary Info: with gasket/
seal - Outer Diameter 1 [mm]: 73
- Inner Diameter 1 [mm]: 35
- Manufacturer: KAMOKA
- Filter type: Filter Insert
- Length [mm]: 103
- Outer Diameter [mm]: 76.5
- Inner Diameter [mm]: 32
- Inner Diameter 1 [mm]: 14
- Fitted Diameter [mm]: 31.5
- for OE number: 11427542021
- Manufacturer: ASHIKA
- Filter type: Filter Insert
- Length [mm]: 103
- Outer Diameter [mm]: 76.5
- Inner Diameter [mm]: 32
- Inner Diameter 1 [mm]: 14
- Fitted Diameter [mm]: 31.5
- for OE number: 11427542021
- Manufacturer: JAPKO
- Filter type: Filter Insert
- Height [mm]: 102
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 71
- Outer Diameter 1 [mm]: 74
- Inner Diameter 1 [mm]: 34
- Manufacturer: JPN
- Filter type: Filter Insert
- Height [mm]: 103
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 77
-
Supplementary Article/Supplementary Info: with gasket/
seal - Outer Diameter 1 [mm]: 73
- Inner Diameter 1 [mm]: 35
- Manufacturer: DENCKERMANN FILTRY
- Filter type: Filter Insert
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Height [mm]: 103
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 77
- Outer Diameter 1 [mm]: 73
- Inner Diameter 1 [mm]: 35
- Name: Olifilter
- Manufacturer: MAX
- Height [mm]: 103
- Outer Diameter [mm]: 77
- Inner Diameter [mm]: 32
- Filter type: Filter Insert
- Outer Diameter 1 [mm]: 73.2
- Inner Diameter 1 [mm]: 35
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Filter type: Filter Insert
- Inner Diameter [mm]: 32
- Height [mm]: 103
- Outer Diameter [mm]: 77
- Sealing Ring Diameter [mm]: 14
- Weight [kg]: 0.067
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Name: Olifilter
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Filter type: Filter Insert
- Inner Diameter [mm]: 32
- Height [mm]: 103
- Outer Diameter [mm]: 77
- Sealing Ring Diameter [mm]: 14
- Weight [kg]: 0.067
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Observe service information:
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Height [mm]: 103
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 77
- Filter type: Filter Insert
- Outer Diameter 1 [mm]: 73
- Inner Diameter 1 [mm]: 35
- Manufacturer: DRIVE
- Filter type: Filter Insert
- Outer Diameter 1 [mm]: 73
- Inner Diameter 1 [mm]: 33
- Height [mm]: 104
- Manufacturer: KOLBENSCHMIDT
- Filter type: Filter Insert
- General Information: Oil filter element
- Manufacturer: BORSEHUNG
- Filter type: Filter Insert
- Height [mm]: 103
- Outer Diameter 1 [mm]: 73
- Outer Diameter 2 [mm]: 77
- Inner Diameter 1 [mm]: 14
- Inner Diameter 2 [mm]: 30
- SVHC: No SVHC present!
- Manufacturer: FILTRON
- Filtritüüp: Filtrer
- Kõrgus (mm): 103
- Välisläbimõõt [mm]: 77
- Siseläbimõõt [mm]: 32
- Läbimõõt 3 (mm): 35
- Läbimõõt 4 (mm): 73
- Manufacturer: PURFLUX
- Filter type: Filter Insert
- Outer Diameter [mm]: 73
- Inner Diameter [mm]: 35
- Inner Diameter 1 [mm]: 32
- Height [mm]: 103
- Manufacturer: HENGST FILTER
-
ELi tooteohutuse määrus (GPSR): IEC 60417-
6183 nõutavad mehaanikaalased teadmised - Filtritüüp: Filtrer
- Piirangutega toode/piirangu info: koos tihendiga
- Kõrgus (mm): 102
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 71
- Välisläbimõõt 1 [mm]: 74
- Siseläbimõõt 1 [mm]: 34
- SVHC: SVHS aineid ei esine
- Name: OLIFILTER
- Manufacturer: MAN
- Filter type: Filter Insert
- Diameter [mm]: 77
- Height [mm]: 103
- Inner Diameter 2 [mm]: 35
- Inner Diameter 3 [mm]: 32
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Packaging height [cm]: 10.7
- Net Weight [g]: 67
- Packaging length [cm]: 8.1
- Packaging width [cm]: 8.1
- Name: KN OX636D
- Manufacturer: KNECHT
- Filter type: Filter Insert
- Diameter [mm]: 77
- Height [mm]: 103
- Inner Diameter 2 [mm]: 35
- Inner Diameter 3 [mm]: 32
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Packaging height [cm]: 10.7
- Net Weight [g]: 67
- Packaging length [cm]: 8.1
- Packaging width [cm]: 8.1
- Manufacturer: MAHLE KNECHT
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks