Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Weight [kg]: 0.043
- Outer Diameter [mm]: 28
- Inner Diameter [mm]: 13
- Height [mm]: 20.5
- Manufacturer: 3RG
-
Material: Rubber/
Metal - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 20.5
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 28
-
Material: Rubber/
Metal - Fitting Position: Front
- Weight [kg]: 0.044
-
Name: PUKS,
PIKIVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Name: PUKS,
PIKIVOLL - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Quantity per packing unit: 5
- Length [mm]: 20.5
-
Material: Rubber/
Metal - Outer Diameter [mm]: 28
- Inner Diameter [mm]: 14
- Weight [kg]: 0.052
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front
-
Drive -/ PTO Shafts: for one-
piece propshaft - Joint Type: Flexible Joint Disc
- Number of Holes: 6
- Manufacturer: JP GROUP
-
Lisainfo: Joint,
propeller shaft -
Additional information: Joint,
propeller shaft
- Fitting Position: Front
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Joint Type: Flexible Joint Disc
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: MAX
- for OE number: 26 11 7 503 159
- Fitting Position: Front
-
Material: Rubber/
Metal - Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 78
- Observe service information:
-
Fabrication Number: NPE-
BM- 006 - Manufacturer: NTY
-
Name: NTY NPE-
BM- 006
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Bolt Hole Circle Ø [mm]: 96
-
Material: Rubber/
Metal - Number of Holes: 6
- Fitting Position: Front
- for OE number: 26 11 7 511 454
- Outer Diameter [mm]: 135
- Inner Diameter [mm]: 50
- Thickness [mm]: 30
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: MAX
- Fitting Position: Front
- for OE number: 26 11 1 204 294
- Manufacturer: GSP
- for OE number: 26 11 7 511 454
- Fitting Position: Front
- Thickness [mm]: 30
-
Material: Rubber/
Metal - Inner Diameter [mm]: 50
- Outer Diameter [mm]: 135
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 96
- Observe service information:
-
Fabrication Number: NPE-
BM- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Fitting,
Rear -
Fabrication Number: NKW-
BM- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Fitting,
Front -
Fabrication Number: NKW-
BM- 001
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 26 11 7 503 159
- Joint Type: Flexible Joint Disc
-
Name: Liigend,
pikivoll - Manufacturer: TRU
- Fitting Position: Front
- for OE number: 12 20 843
- Manufacturer: GSP
- for OE number: 26 11 7 511 454
- Joint Type: Flexible Joint Disc
-
Name: Liigend,
pikivoll - Manufacturer: TRU
- Thickness [mm]: 30
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 135
- Bolt Hole Circle Ø [mm]: 96
- Number of Holes: 6
- Manufacturer: 3RG
- Joint Type: Flexible Joint Disc
- Number of Holes: 6
- Fitting Position: Front
- Outer Diameter [mm]: 135
- Bolt Hole Circle Ø [mm]: 96
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Required quantity: 1
-
Material: Rubber/
Metal - Bolt Hole Circle Ø [mm]: 96
- Weight [g]: 611
- Thickness [mm]: 30
- Outer Diameter [mm]: 135
- Inner Diameter 1 [mm]: 50
- Inner Diameter 2 [mm]: 96
- Number of Holes: 6
- Name: IM 2439
- Manufacturer: ORIGINAL IMPERIUM
- Diameter [mm]: 43
- Length [mm]: 21.9
- Internal Toothing differential side, conn. to transmission: 26
- Core Hole Diameter [mm]: 29
- Diameter 1 [mm]: 43
- Diameter 2 [mm]: 14.5
- Manufacturer: METALCAUCHO
- Outer Diameter [mm]: 135
- Inner Diameter [mm]: 50
- Thickness [mm]: 30
- Bolt Hole Circle Ø [mm]: 96
- Notches/Holes Number: 6
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Joint Type: Flexible Joint Disc
- Number of mounting bores: 6
- Bolt Hole Circle Ø [mm]: 96
- Thickness [mm]: 30
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 135
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 773000410
- Fitting Position: Front
- Outer Diameter [mm]: 132
- Inner Diameter [mm]: 50
- Width [mm]: 30
- Bolt Hole Circle Ø [mm]: 96
SVHC: No information available, please contact the manufacturer!
- Outer Diameter [mm]: 110
- Inner Diameter [mm]: 39
- Width [mm]: 28
- Bolt Hole Circle Ø [mm]: 78
- Fitting Position: Front
- Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front
-
Drive -/ PTO Shafts: for one-
piece propshaft - Diameter [mm]: 110
-
Supplementary Article/Supplementary Info: without fastening/
mounting material - Joint Type: Flexible Joint Disc
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 78
- Quantity Unit: Piece
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: MEY
General Information: MEYLE-HD flex discs with optimised rubber compound tolerating temperatures up to 130°C. Enhanced performance thanks to reduced torque peaks, damping of wave length frequency and noise insulation.
- Weight [kg]: 0.391
- Inner Diameter [mm]: 39
- Required quantity: 1
- Bolt Hole Circle Ø [mm]: 78
- Joint Type: Flexible Joint Disc
- Fitting Position: Front
-
Name: Liigend,
pikivoll - Manufacturer: TED
- Fitting Position: Front
- Thickness [mm]: 30
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 132
- Bolt Hole Circle Ø [mm]: 96
-
Material: Rubber/
Metal - Number of Holes: 6
- Weight [kg]: 0.49
- Observe service information:
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 50
- Weight [kg]: 1
- Required quantity: 1
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: TED
- Fitting Position: Front
- Thickness [mm]: 30
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 132
- Bolt Hole Circle Ø [mm]: 96
-
Material: Rubber/
Metal - Number of Holes: 6
- Weight [kg]: 0.49
- for OE number: 26 11 7 511 454
- Observe service information:
- Name: SW 20 86 0007
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Diameter [mm]: 132
-
Supplementary Article/Supplementary Info: without fastening/
mounting material - Joint Type: Flexible Joint Disc
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 96
- Quantity Unit: Piece
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: MEY
-
Lisainfo: 3141523102/
HD -
Additional information: 3141523102/
HD
General Information: MEYLE-HD flex discs with higher durability thanks to reduced inner friction, optimised and innovative winding technique as well as improved thrust and traction characteristics.
- Bolt Hole Circle Ø [mm]: 78
-
Material: Rubber/
Metal - Number of Holes: 6
- Fitting Position: Front
- Weight [kg]: 0.392
- Observe service information:
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 61
- Thickness [mm]: 30
- Inner Diameter [mm]: 50
-
Outer Diameter [mm]: 135,
132 - Bolt Hole Circle Ø [mm]: 96
-
Material: Rubber/
Metal - Number of Holes: 6
- Supplementary Article/Supplementary Info: with nuts
-
Supplementary Article/Info 2: with bolts/
screws - Fitting Position: Front
-
Thread Size: M12 x 1,
5 - Weight [kg]: 0.73
- Observe service information:
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front
- Diameter [mm]: 132
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Joint Type: Flexible Joint Disc
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 96
- Quantity Unit: Piece
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Transmission Type: Automatic Transmission
- Weight [kg]: 0.586
- Packaging length [cm]: 13.2
- Packaging width [cm]: 12.4
- Packaging height [cm]: 3
- Bolt Hole Circle Ø [mm]: 96
- Manufacturer: FEBEST
-
Drive -/ PTO Shafts: for one-
piece propshaft - Fitting Position: Front
- Diameter [mm]: 110
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Joint Type: Flexible Joint Disc
- Number of Holes: 6
- Bolt Hole Circle Ø [mm]: 78
- Quantity Unit: Piece
-
Name: LIIGEND,
PIKIVOLL - Manufacturer: MEY
General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks