Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- Brake Type: Drum Brake
- Diameter [mm]: 180
- Width [mm]: 25
- Manufacturer Restriction: ATE
- Manufacturer: JP GROUP
-
Lisainfo: Accessory Kit,
parking brake shoes -
Additional information: Accessory Kit,
parking brake shoes
- Fitting Position: Rear Axle
- Quantity: 12
- for OE number: 34410005254
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Fitting Position: Rear Axle
- Quantity: 12
- for OE number: 148321
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Fitting Position: Rear Axle
- Brake System: ATE
- Drum diameter [mm]: 180
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D3-
930A
- Fitting Position: Rear Axle
- Brake System: ATE
- Inner brake drum diameter [mm]: 185
- Width [mm]: 20
- Manufacturer: QUICK BRAKE
-
Name: QB 105-
0621
- Fitting Position: Rear Axle
- Brake System: ATE
- Inner brake drum diameter [mm]: 185
- Width [mm]: 20
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LY1042
- Quality class: PJ
Lisainfo: "Tootja: DELPHI
BMW 5/6/7
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle both sides
- Drum diameter [mm]: 185
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Rear Axle
- Manufacturer: ATE
- Inner brake drum diameter [mm]: 185
- Brake System: ATE
- Manufacturer: BOSCH
- Diameter 1 [mm]: 24
- Diameter 2 [mm]: 17.9
- Manufacturer: ATE
-
Lisainfo: 03.0137-
9700.2 -
Additional information: 03.0137-
9700.2
for article number: 03.0137-0150.2, 03.0137-0305.2, 03.0137-0379.2, 03.0137-0419.2, 03.0137-0451.2, 03.0137-3054.2, 03.0137-4010.2, 03.0137-4018.2
- Fitting Position: Rear Axle
- Brake System: ATE
- Inner brake drum diameter [mm]: 185
- Width [mm]: 20
- Manufacturer: METZGER
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: without lever
- Width [mm]: 20
- Inner brake drum diameter [mm]: 185
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Width [mm]: 20
- Outer Diameter [mm]: 185
- Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 3.3
- Weight [kg]: 1
- for OE number: 34 41 6 761 292
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 20
- Outer Diameter [mm]: 185
- Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 3.3
- Weight [kg]: 1
- for OE number: 34 41 6 761 292
- Name: SW 20 91 8535
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Width [mm]: 20
- Brake System: ATE
- Inner brake drum diameter [mm]: 185
- Name: BR S 06 509
- Manufacturer: BREMBO
- Fitting Position: Rear Axle
- Width [mm]: 20
- Brake System: ATE
- Inner brake drum diameter [mm]: 161
- Manufacturer: BREMBO
- Name: BR S 06 510
- Diameter [mm]: 185
- Width [mm]: 20
- Brake Pad: with lining
- Fitting Position: Rear Axle
- Weight [kg]: 1.076
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Brake System: ATE
- Inner brake drum diameter [mm]: 185
- Width [mm]: 20
- Braking System: for parking brake
- Manufacturer: QUICK BRAKE
- Fitting Position: Rear Axle
- Diameter [mm]: 185
- Width [mm]: 20
- Registration Type: ECE approved
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Rear Axle
-
Brake System: ATE
(Teves) - Inner brake drum diameter [mm]: 185
- Width [mm]: 20
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Fitting Position: Rear Axle
- Width [mm]: 20
- Inner brake drum diameter [mm]: 185
- Manufacturer: BOSCH
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 185
- Width [mm]: 20
- Supplementary Article/Info 2: without handbrake lever
- Packaging length [cm]: 19.8
- Packaging width [cm]: 12.5
- Packaging height [cm]: 8.2
- Weight [kg]: 0.99
- Manufacturer: MINTEX
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 185
- Width [mm]: 20
-
Test Mark: E1 90R-
011043/ 079 - MAPP code available:
-
Article number of recommended accessories: 03.0137-
9062.2, 03.0137- 9700.2, 03.0137- 9702.2 - Observe dimensions:
- Manufacturer: ATE
- Fitting Position: Rear Axle
- Brake System: ATE
- Braking System: for parking brake
- for OE number: 34 41 6 851 437
- Manufacturer: METZGER
- Fitting Position: Rear Axle
- Width [mm]: 20
- Supplementary Article/Supplementary Info: with accessories
- Inner brake drum diameter [mm]: 185
- Manufacturer: BOSCH
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks