• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 1,090
• Lisainfo: Sensor, brake lining wear, rear
• Additional information: Sensor, brake lining wear, rear

Lisainfo: Sensor, wheel speed

Fabrication Number: ECT-BM-011

• Supplementary Article/Info 2: without sensor, without cable
• Supplementary Article/Supplementary Info: with socket housing
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: N54 B30 A, N55B30A
• Block Separation:
• Fitting Position: Upper
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: black
• Spanner Size: 22
• Thread Size: M12x1.5
• for OE number: 13621433076
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Engine Code: N54 B30 A, N55B30A
• Block Separation:
• Fitting Position: Upper
• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S22
• Thread Size: M12*1,5
• Name: NI 207088
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Cable Length [mm]: 690
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: N54 B30 A, N55B30A
• Block Separation:
• Fitting Position: Upper
• Housing Colour: black
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 22
• Manufacturer: DELPHI
• Name: DE TS10270

• Fitting Position: both sides, Rear, Front, outer
• Fabrication Number: EPDC-BM-006
• Name: NTY EPDC-BM-006
• Manufacturer: NTY

• Number of pins: 2
• Housing Colour: black
• Manufacturer: FAE

• Thread Size: M12 x 1,5
• Spanner Size: 22
• Number of pins: 2
• Manufacturer: ERA

• Engine Code: N54 B30 A, N54B30A
• Thread Size: M12x1,5
• Spanner Size: 22
• Name: EP 1.830.272
• Manufacturer: EPS

• for OE number: 13 62 7 525 014
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Number of mounting bores: 1
• Fabrication Number: ECP-BM-005

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 635
• Sensor Type: Active sensor
• Braking/Drive Dynamics: for vehicles with ABS
• Fabrication Number: HCA-BM-033

• Engine Code: N54B30A
• Thread Size: M12x1,5
• Spanner Size: 22
• Sensor Type: NTC Sensor
• Number of pins: 2
• Mounting Type: Vertical Screw Fitting
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107851
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 1,010
• Number of pins: 2
• Fitting Depth [mm]: 41.1
• Fabrication Number: HCA-BM-034

• Number of pins: 3
• Weight [kg]: 0.03
• Warranty: 3 years warranty
• Name: CE 17SKV494
• Manufacturer: ESEN SKV

• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Fabrication Number: ECP-BM-001
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour: black
• Connector Shape: oval
• Sensor Type: Hall Sensor

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Active sensor
• Length [mm]: 660
• Socket colour: grey

• Voltage [V]: 12
• Resistor [Ohm]: 3,400
• Rated Temperature [°C]: 20
• Vehicle Equipment: for vehicles with air conditioning
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009104151

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front and Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Weight [kg]: 0.03
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 28SKV001
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Left, Rear Axle Right
• Connector Shape: round
• Overall Length [mm]: 1,000
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 40
• Cable Length [mm]: 880
• Fabrication Number: HCA-BM-035

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 630
• Number of pins: 2
• Warranty: 3 years warranty
• Name: CE 06SKV420
• Manufacturer: ESEN SKV

• Height [mm]: 27.9
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Engine Code: N54 B30 A
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11247

• Number of connectors: 3
• Weight [kg]: 0.025
• Name: SW 33 10 2687
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear, Front
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 3
• Chemical Properties: Paintable
• Housing Colour: black
• Manufacturer: ERA

• Engine Code: N55B30A
• Required quantity: 1
• Manufacturer: BREMI

• Number of connectors: 3
• Weight [kg]: 0.025
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Name: NTY ESL-SK-000
• Manufacturer: NTY

Fabrication Number: ESS-BM-000

• Engine Code: N55B30A
• Number of pins: 3
• Sensor Type: Hall Sensor
• Cable Length [mm]: 128
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU009168861
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: N54 B30 A
• Resistor Type: Hall Sensor
• Height [mm]: 27.8
• Manufacturer: VERNET

• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Engine Code: N54B30A
• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009163301

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 558
• Manufacturer: DELPHI
• Name: DE SS20555

• Required quantity: 1
• Engine Code: N54B30A
• Number of pins: 4
• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with seal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP009403241

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 28
• Alternative Repair Kit: 550604
• Manufacturer: ERA

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

Number of pins: 3

• Engine Code: N54 B30 A
• Required quantity: 2
• Name: EP 1.953.523
• Manufacturer: EPS

• Length [mm]: 685
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.05
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Cable Length [mm]: 490
• Manufacturer: DELPHI
• Name: DE SS20556

• Engine Code: N55B30A
• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Required quantity: 8
• Fitting Position: both sides, Front, Rear
• Number of pins: 3
• Chemical Properties: Over-paintable
• Mounting Type: Plugged
• Socket colour: black
• Shaft form: round
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PX358141831
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 4
• Plug Type: Male
• Fabrication Number: EPP-BM-023

• Length [mm]: 685
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Name: SW 20 94 7361
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 2
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11123

• Required quantity: 8
• Fitting Position: both sides, Front, Rear
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PX358141021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 09.2009
• Frequency Range [MHz]: 433
• Valve colour: silver
• Tightening Torque [Nm]: 6
• Mounting Type: Bolted
• Supplementary Article/Info 2: with groove, with valves
• Permissible maximum speed [km/h]: 250
• Manufacturer: SKF
• Name: SK VKRA110050

• Construction Year from: 10.2009
• Frequency Range [MHz]: 433
• Valve colour: silver
• Tightening Torque [Nm]: 8
• Mounting Type: Bolted
• Supplementary Article/Info 2: with groove, with valves
• Permissible maximum speed [km/h]: 250
• Manufacturer: SKF
• Name: SK VKRA110049

• Fitting Position: Front Axle
• Required quantity: 2
• Voltage [V]: 12
• Cable Length [mm]: 570
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU012806101

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Quantity: 1
• Engine Code: N55B30A
• Number of pins: 4
• Pressure from [kPA]: 20
• Manufacturer: DELPHI

• Number of pins: 3
• Weight [kg]: 0.06
• Warranty: 3 years warranty
• Name: CE 17SKV620
• Manufacturer: ESEN SKV

• Required quantity: 2
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Number of mounting bores: 1
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121011

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 09.2007
• Construction Year to: 08.2008
• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 1,005
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• External Thread Size: M10 x 1
• Number of connectors: 3
• Weight [kg]: 0.04
• Name: SW 33 10 6949
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 2
• Voltage [V]: 12
• Cable Length [mm]: 890
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Upper
• Lambda Sensor: Heated, Diagnostic Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 460
• Weight [kg]: 0.086
• Name: SW 33 10 3200
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 09.2007
• Required quantity: 2
• Fitting Position: Front Axle
• Length [mm]: 680
• MAPP code available:
• Manufacturer: ATE

• Fitting Position: Front Axle
• Length [mm]: 680
• Sensor Type: Active sensor
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Length [mm]: 959
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Number of connectors: 4
• Weight [kg]: 0.01
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Fabrication Number: EZA-BM-000
• Name: NTY EZA-BM-000
• Manufacturer: NTY

• Weight [kg]: 0.04
• Warranty: 3 years warranty
• Name: CE 17SKV629
• Manufacturer: ESEN SKV

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Engine Code: N54 B30 A
• Cable Length [mm]: 614
• Manufacturer: DELPHI
• Name: DE ES20368-12B1

• Construction Year from: 09.2007
• Construction Year to: 08.2008
• Lambda Sensor: Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986602

Fitting Position: after catalytic converter, for cylinder 1-3, for cylinder 4-6

• Construction Year to: 01.2010
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Engine Code: N54 B30 A
• Cable Length [mm]: 1
• Name: DE ES20695-12B1
• Manufacturer: DELPHI

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.2
• Warranty: 3 years warranty
• Name: CE 09SKV405
• Manufacturer: ESEN SKV

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Housing Type: without housing
• Manufacturer: BREMI

• Engine Code: N54 B30 A, N54B30A
• Fitting Position: after catalytic converter
• Required quantity: 1
• Length [mm]: 560
• Cable Length [mm]: 570
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.325
• Manufacturer: EPS

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV905
• Manufacturer: ESEN SKV

• Thread Size: M10x1
• Spanner Size: 24
• Number of pins: 3
• Injection System: Common Rail
• Supplementary Article/Info 2: Low Pressure Side, with seal ring
• Housing Colour: black
• Connector Shape: oval
• Weight [kg]: 0.04
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Fabrication Number: EPO-BM-002

• Construction Year from: 09.2007
• Construction Year to: 08.2008
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 4-6
• Number of circuits: 4
• Overall Length [mm]: 502
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Engine Code: N54 B30 A, N54B30A
• Fitting Position: before catalytic converter
• Required quantity: 1
• Length [mm]: 1,400
• Cable Length [mm]: 1,500
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.482
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Number of pins: 3
• Connector Shape: D Shape
• Number of mounting bores: 3
• Weight [kg]: 0.18
• Warranty: 3 years warranty
• Name: CE 17SKV628
• Manufacturer: ESEN SKV

• Construction Year from: 09.2007
• Construction Year to: 08.2008
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, for cylinder 1-3
• Number of circuits: 4
• Overall Length [mm]: 572
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Construction Year from: 09.2007
• Construction Year to: 08.2008
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 1-3
• Number of circuits: 5
• Overall Length [mm]: 1,400
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258017098

• Construction Year from: 09.2007
• Construction Year to: 08.2008
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter, for cylinder 4-6
• Number of circuits: 5
• Overall Length [mm]: 1,200
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH