• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 575
• Number of wear indicators [per axle]: 1
• Net weight [kg]: 0.03

• Fitting Position: Rear Axle
• Brake System: Teves
• Height [mm]: 59.2
• Width [mm]: 123
• Thickness [mm]: 17.2
• Wear Warning Contact: prepared for wear indicator
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 16.3 mm
• Additional information: Brake pad set, rear, 16.3 mm

• Fitting Position: Front Axle
• Number of wear indicators [per axle]: 1
• Supplementary Article/Info 2: with cable
• Length [mm]: 575
• Wear Warning Contact: Change warning contact together with the pads
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Number of wear indicators [per axle]: 1
• Supplementary Article/Info 2: with cable
• Length [mm]: 623
• Wear Warning Contact: Change warning contact together with the pads
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 625
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0154A

• Fitting Position: Rear Axle
• Length [mm]: 620
• Weight [kg]: 0.018
• Brake Type: Disc Brake
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Length [mm]: 585
• Supplementary Article/Supplementary Info: Axle Kit
• Manufacturer: QUICK BRAKE
• Name: QB WS0205A

• Construction Year to: 12.2000
• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Length [mm]: 570
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Construction Year to: 12.2000
• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Length [mm]: 580
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Construction Year to: 05.2000
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.022
• Warning Contact Length [mm]: 620
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 620
• Packaging length [cm]: 18.5
• Packaging width [cm]: 1
• Packaging height [cm]: 1.2
• Weight [kg]: 0.018
• Manufacturer: MINTEX

• Construction Year to: 05.2000
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Weight [kg]: 0.028
• Warning Contact Length [mm]: 570
• Manufacturer: TOMEX BRAKES

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 570
• Packaging length [cm]: 18.5
• Packaging width [cm]: 1
• Packaging height [cm]: 1.2
• Weight [kg]: 0.026
• Manufacturer: MINTEX

• Length [mm]: 550
• Fitting Position: Front Axle Left, Front Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.01
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 05.1996
• Fitting Position: Front Axle
• Length [mm]: 569
• Brake Type: Disc Brake
• Manufacturer: LPR

• Length [mm]: 580
• Fitting Position: Rear Axle Left, Rear Axle Right
• Brake Type: Disc Brake
• Weight [kg]: 0.01
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Construction Year to: 05.2000
• Brake Type: Disc Brake
• Length [mm]: 570
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Brake Type: Disc Brake
• Fitting Position: Front Axle
• Warning Contact Length [mm]: 570
• Required quantity: 1
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Type: Disc Brake
• Length [mm]: 620
• Weight [kg]: 0.02
• Number of wear indicators [per axle]: 1
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left, Front Axle Right
• Braking/Drive Dynamics: for vehicles with ABS
• Brake Type: Disc Brake
• Length [mm]: 570
• Weight [kg]: 0.03
• Number of wear indicators [per axle]: 1
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 620
• Number of wear indicators [per axle]: 1
• Manufacturer: BREMBO

• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Warning Contact Length [mm]: 620
• Required quantity: 1
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MEY

• Construction Year from: 05.1996
• Required quantity: 1
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 569
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 570
• Number of wear indicators [per axle]: 1
• Name: BR A 00 232
• Manufacturer: BREMBO

• Construction Year from: 05.1996
• Required quantity: 1
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 620
• Name: Hoiatuskontakt, piduriklotsi kulumine
• Manufacturer: ATE

• Fitting Position: Rear Axle
• Construction Year to: 05.2000
• Brake Type: Disc Brake
• Length [mm]: 625
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 570
• Packaging length [cm]: 26
• Packaging width [cm]: 15
• Packaging height [cm]: 1
• Weight [kg]: 0.022
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Construction Year to: 12.2000
• Fitting Position: Front Axle
• Length [mm]: 570
• Brake Type: Disc Brake
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 620
• Packaging length [cm]: 26
• Packaging width [cm]: 15
• Packaging height [cm]: 1
• Weight [kg]: 0.019
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Construction Year from: 05.1996
• Fitting Position: Rear Axle
• Width [mm]: 123
• Height [mm]: 59.2
• Thickness [mm]: 17.3
• Brake System: ATE
• Test Mark: ECE R90
• Manufacturer: ABAKUS DEPO/LORO

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 123
• Height [mm]: 59
• Thickness [mm]: 17
• WVA Number: 21487
• Test Mark: ECE R90 APPROVED
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE
• Width [mm]: 123
• Height [mm]: 59
• Thickness [mm]: 17
• Manufacturer: KAMOKA

• Construction Year from: 05.1996
• Fitting Position: Rear Axle
• Width [mm]: 123
• Height [mm]: 59.2
• Thickness [mm]: 17.3
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Manufacturer Restriction: ATE
• Height [mm]: 59.2
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Fitting Position: Rear Axle
• Width [mm]: 123
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Height [mm]: 59.2
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Braking System: also for perforated brake discs
• Width [mm]: 123
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MAX

• for OE number: 34 21 6 761 248
• Fitting Position: Rear Axle
• Manufacturer: TRUCKTEC

• Construction Year from: 05.1996
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Thickness [mm]: 17.2
• Width [mm]: 123
• Height [mm]: 59.4
• Brake System: ATE
• Manufacturer: LPR

Article number of recommended accessories: KS0053, KS0010, KS0021, KS0043, KS0047, KS0202, KS0035, KS0031

• Article number of recommended accessories: 98019800
• Height [mm]: 73.4
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Fitting Position: Front Axle
• Width [mm]: 120
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Length [mm]: 123
• Width [mm]: 59
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.238
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 16.3
• Width [mm]: 123.2
• Height [mm]: 59.4
• Wear Warning Contact: excl. wear warning contact
• Brake System: ATE-TEVES
• Manufacturer: OPTIMAL ZAWIESZENIE

• Width [mm]: 123
• Height [mm]: 59.2
• Thickness [mm]: 17.2
• Wear Warning Contact: prepared for wear indicator
• Brake System: Teves
• Fitting Position: Rear Axle
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Construction Year from: 05.1996
• Fitting Position: Front Axle
• Width [mm]: 119.8
• Height [mm]: 73.6
• Thickness [mm]: 18
• Brake System: Brembo
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Length [mm]: 123.1
• Width [mm]: 59.2
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.238
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 08.2001
• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 123
• Height [mm]: 59.2
• Thickness [mm]: 17.3
• WVA Number: 21487
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.157
• Name: VA 301580
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Article number of recommended accessories: MWI0154, MBA1201
• Width [mm]: 123.2
• Height [mm]: 59.2
• Thickness [mm]: 17.2
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21487
• Brake System: Teves
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1
• Manufacturer: MINTEX

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D683-7427
• Test Mark: E9 90R-01825/785
• WVA Number: 21282 21487
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 123.5
• Width 2 [mm]: 123.1
• Height 1 [mm]: 59.2
• Height 2 [mm]: 59.2
• Thickness 1 [mm]: 16.5
• Thickness 2 [mm]: 16.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1803

• Fitting Position: Front Axle
• Article number of recommended accessories: 98019800
• Width [mm]: 120
• Height [mm]: 73.4
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Length [mm]: 123.1
• Width [mm]: 59.2
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.238
• Name: SW 20 91 6175
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width 1 [mm]: 119.8
• Height 1 [mm]: 73.5
• Thickness 1 [mm]: 18
• Brake System: BREMBO
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 1.99
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 17
• Length [mm]: 123
• Height [mm]: 59.8
• Wear Warning Contact: prepared for wear indicator
• Brake Pad: With bevelled edges
• Brake System: Teves
• WVA Number: 21282, 21487
• Name: SK VKBP90279
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Width [mm]: 123.2
• Height [mm]: 59.4
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Thickness [mm]: 17
• Width [mm]: 120
• Height [mm]: 73.7
• Wear Warning Contact: prepared for wear indicator
• Brake System: BREMBO
• Weight [kg]: 2.05
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 123
• Thickness [mm]: 17
• Height [mm]: 59
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• Supplementary Article/Info 2: with piston clip
• WVA Number: 21487, 21282
• Name: BR P 06 020
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Width [mm]: 123.1
• Height [mm]: 59.2
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R - 01708/011
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D639-7517
• Test Mark: E9 90R-01841/1490
• WVA Number: 21471
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: prepared for wear indicator
• Width 1 [mm]: 120.5
• Width 2 [mm]: 120.6
• Height 1 [mm]: 73.7
• Height 2 [mm]: 73.7
• Thickness 1 [mm]: 17.5
• Thickness 2 [mm]: 17.5
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP1584

• Fitting Position: Front Axle
• Width [mm]: 120.3
• Height [mm]: 73.6
• Thickness [mm]: 17.7
• Wear Warning Contact: prepared for wear indicator
• Brake System: Brembo
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: ATE-TEVES
• Width [mm]: 123
• Height [mm]: 59
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Length [mm]: 120
• Width [mm]: 73.7
• Test Mark: ECE R90 Approved
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17.8
• Wear Warning Contact: prepared for wear indicator
• Weight [kg]: 2.006
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Construction Year to: 05.2000
• Brake Disc Type: Vented
• Manufacturer Restriction: ATE
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21282
• Test Mark: E20 90R-02A0133/024
• Length [mm]: 123
• Thickness [mm]: 17.3
• Height [mm]: 59.2
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Construction Year to: 12.2000
• Fitting Position: Rear Axle
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21486
• Thickness [mm]: 16
• Width [mm]: 123.2
• Height [mm]: 59.4
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

Supplementary Article/Info 2: with mounting manual, with anti-squeak plate, with piston clip

• Construction Year to: 08.2001
• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 123
• Height [mm]: 59.5
• Thickness [mm]: 17.3
• WVA Number: 21487
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.12
• Manufacturer: VALEO

• Construction Year to: 12.2000
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with anti-squeak plate, with mounting manual
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21471
• Thickness [mm]: 17.8
• Width [mm]: 120
• Height [mm]: 73.7
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Fitting Position: Rear Axle
• Width [mm]: 123.2
• Height [mm]: 59.4
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Brake System: ATE
• Supplementary Article/Info 2: with anti-squeak plate
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Width [mm]: 123.1
• Height [mm]: 59.2
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R-02A1148/0785
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Article number of recommended accessories: 98019900, 82057500
• Width [mm]: 123.2
• Height [mm]: 59.2
• Thickness [mm]: 17.2
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21487
• Brake System: Teves
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Front Axle
• Article number of recommended accessories: MWI0153
• Width [mm]: 119.7
• Height [mm]: 73.4
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21471
• Brake System: Brembo
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.9
• Manufacturer: MINTEX

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: BREMBO
• Wear Warning Contact: prepared for wear indicator
• Test Mark: E9 90R 01705/000
• Height [mm]: 73.7
• Width [mm]: 120
• Thickness [mm]: 17
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Thickness [mm]: 17.2
• Test Mark: R90 Homologated
• Width [mm]: 123
• Height [mm]: 59.4
• Weight [kg]: 1.3
• Height 1 [mm]: 59.4
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: ATE
• Packing Type: Box
• Supplementary Article/Info 2: with piston clip
• WVA Number: 21282, 21487
• Packaging length [cm]: 16.8
• Packaging width [cm]: 9.7
• Packaging height [cm]: 6.2
• Manufacturer: JURID

• Construction Year from: 05.1996
• Fitting Position: Rear Axle
• Width [mm]: 123
• Height [mm]: 59.2
• Thickness [mm]: 17.3
• Brake System: ATE
• Test Mark: E1 90R-02A0525/0487, E9 90R-02A1163/0785
• MAPP code available:
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE
• Quality class: Q

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0209.2, 24.8190-0218.2, 24.8190-0221.2, 24.8190-0226.2, 24.8190-0228.2, 24.8190-0241.2, 24.8190-0245.2, 24.8190-1308.2

• Construction Year from: 05.1996
• Fitting Position: Front Axle
• Width [mm]: 119.8
• Height [mm]: 73.6
• Thickness [mm]: 18
• Brake System: Brembo
• Test Mark: E1 90R-01056/337
• MAPP code available:
• Article number of recommended accessories: 13.0460-0267.2, 24.8190-0208.2
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Article number of recommended accessories: 98019800
• Width [mm]: 119.7
• Height [mm]: 73.4
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21471
• Brake System: Brembo
• Packaging length [cm]: 15.2
• Packaging width [cm]: 8.8
• Packaging height [cm]: 8.4
• Weight [kg]: 1.9
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TEX

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: BREMBO
• Width [mm]: 120
• Height [mm]: 74
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Width [mm]: 120
• Thickness [mm]: 18
• Height [mm]: 74
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Brembo
• WVA Number: 21471
• Manufacturer: BREMBO
• Name: BR P 06 018

• Fitting Position: Front Axle
• Article number of recommended accessories: 8DK 355 250-191
• Width [mm]: 119.7
• Height [mm]: 73.4
• Thickness [mm]: 18
• Wear Warning Contact: prepared for wear indicator
• WVA Number: 21471
• Brake System: Brembo
• Weight [kg]: 1.9
• Technical Information Number: T5091
• Name: HE 8DB355018211
• Manufacturer: HELLA PAGID

• Construction Year from: 05.1996
• Fitting Position: Rear Axle
• Width [mm]: 123
• Height [mm]: 59.2
• Thickness [mm]: 17.3
• Brake System: ATE
• Test Mark: E1 90R-02A0258/0339
• MAPP code available:
• Observe dimensions:
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: ATE

Wear Warning Contact: prepared for wear indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0209.2, 24.8190-0218.2, 24.8190-0221.2, 24.8190-0226.2, 24.8190-0228.2, 24.8190-0241.2, 24.8190-0245.2, 24.8190-1308.2 Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Brake System: ATE-TEVES
• Width [mm]: 123
• Height [mm]: 59
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Braking System: Low dust brake pads
• Brake System: ATE-TEVES
• Width [mm]: 123
• Height [mm]: 59
• Thickness [mm]: 17
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Test Mark: ECE R90 APPROVED
• Manufacturer: ZIMMERMANN

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Thickness [mm]: 18
• Test Mark: R90 Homologated
• Width [mm]: 120
• Height [mm]: 74
• Weight [kg]: 2.1
• Height 1 [mm]: 74
• Wear Warning Contact: prepared for wear indicator
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Brembo
• Packing Type: Box
• WVA Number: 21471
• Packaging length [cm]: 16.8
• Packaging width [cm]: 12.7
• Packaging height [cm]: 4.7
• Manufacturer: JURID