Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Engine Code: M62 B44
(448S1), M62 B44 (448S2) - Braking/Driving Dynamics: for vehicles without EDC
- Block Separation:
- Transmission Type: Automatic Transmission
- Length [mm]: 89
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Outer Diameter 2 [mm]: 26
- Outer Diameter [mm]: 27
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MAX
Suspension: for vehicles without M technology, for vehicles with bad road version
-
Engine Code: M62 B44
(448S1) -
Fitting Position: Rear Axle Left,
Rear Axle Right - Suspension: for vehicles without bad road version
- not for country specific design: Community of Independent States
- Block Separation:
- Thickness [mm]: 86
- Material: Plastic
- Inner Diameter 1 [mm]: 61
- Weight [kg]: 0.02
- Inner Diameter 2 [mm]: 68
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid BMW P. E36/38/39
- Fitting Position: Front Axle
- Manufacturer: JP GROUP
-
Lisainfo: Tower rubber stop,
front -
Additional information: Tower rubber stop,
front
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Lisainfo: Rubber stop for shock absorber,
rear -
Additional information: Rubber stop for shock absorber,
rear
-
Engine Code: M62 B44
(448S1), M62 B44 (448S2) - Suspension: for vehicles with standard suspension
- Block Separation:
- Transmission Type: Automatic Transmission
- Length [mm]: 85
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MAX
- Fitting Position: Rear Axle
- Height [mm]: 99
- Required quantity: 2
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MAX
- Fitting Position: Front Axle
- Height [mm]: 90
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
-
Engine Code: M62 B44
(448S1) - Suspension: for vehicles with standard suspension
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 86
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: M62 B44
(448S1) - Suspension: for vehicles with standard suspension
- not for vehicle equipment line/variant: 740iL
- Quantity per packing unit: 2
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Height [mm]: 90
-
Material: PU
(Polyurethane) - Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: M62 B44
(448S1) - Suspension: for vehicles with bad road version
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Thermoplast
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Height [mm]: 195
- Required quantity: 2
- Manufacturer: MAX
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid BMW P. E30/36/E3
- Fitting Position: Front Axle
- Height [mm]: 85
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
-
Engine Code: M62 B44
(448S1), M62 B44 (448S2) - Braking/Driving Dynamics: for vehicles without EDC
- Block Separation:
- Transmission Type: Automatic Transmission
- Length [mm]: 89
- Outer Diameter [mm]: 27
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Outer Diameter 2 [mm]: 26
- Weight [kg]: 0.08
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
Suspension: for vehicles without M technology, for vehicles with bad road version General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: M62 B44
(448S1) - Suspension: for vehicles with bad road version
- Quantity per packing unit: 2
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Height [mm]: 99
-
Material: PU
(Polyurethane) - Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: M62 B44
(448S1), M62 B44 (448S2) - Suspension: for vehicles with standard suspension
- Block Separation:
- Transmission Type: Automatic Transmission
- Length [mm]: 85
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.05
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: M62 B44
(448S1), M62 B44 (448S2) - Braking/Driving Dynamics: for vehicles without EDC
- Block Separation:
- Transmission Type: Automatic Transmission
- Length [mm]: 89
- Outer Diameter [mm]: 27
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Outer Diameter 2 [mm]: 26
- Weight [kg]: 0.08
- Name: SW 20 56 0002
- Manufacturer: SWAG
Suspension: for vehicles without M technology, for vehicles with bad road version General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 31331124449
- Fitting Position: Front Axle
- Length [mm]: 85
- Required quantity: 2
- Weight [g]: 86
- Name: IM 30862
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Suspension: for vehicles without bad road version
- Length [mm]: 99
- Inner Diameter [mm]: 19
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.106
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
not for country specific design: Poland, Romania, Slovakia, Yugoslawia, Community of Independent States, Hungary, Czech Republic, Bulgaria General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Front Axle - Height [mm]: 200
- Material: Thermoplast
- Weight [g]: 77
- Diameter 1 [mm]: 60
- Diameter 2 [mm]: 60
- Name: IM 35220
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Fitting Position: Rear Axle
- Height [mm]: 90
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
- Fitting Position: Rear Axle both sides
-
Supplementary Article/Info 2: with box nut,
with washers -
Fabrication Number: ZWD-
BM- 067SK - Manufacturer: NTY
-
Name: NTY ZWD-
BM- 067SK
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Engine Code: M62 B44
(448S1) - Suspension: for vehicles with standard suspension
- Length [mm]: 90
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.089
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
not for country specific design: Poland, Romania, Slovakia, Yugoslawia, Community of Independent States, Hungary, Czech Republic, Bulgaria General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Suspension: for vehicles without electronic suspension control
- Name: CFD PK1510
- Manufacturer: DACO
- Fitting Position: Front Axle
- Suspension: for vehicles without electronic suspension control
- Guarantee: 5 years guarantee
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Name: CFD PK4780
- Manufacturer: DACO
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Block Separation:
- Thickness [mm]: 200
- Material: Plastic
- Inner Diameter 1 [mm]: 60
- Weight [kg]: 0.06
- Inner Diameter 2 [mm]: 60
- Manufacturer: FEBI BILSTEIN
Suspension: for vehicles with electronic suspension control, for vehicles with bad road version General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles without electronic suspension control
- Construction Year from: 03.1996
- Fitting Position: Front Axle
- for OE number: 6N0413175A
- Manufacturer: KAMOKA AMORTYZATORY
- Suspension: for vehicles without bad road version
- Fitting Position: Rear Axle
- Manufacturer: BILSTEIN
-
Name: BI 11-
289333 - Quality class: Q
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- for OE number: 31 30 2 290 315
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MAX
- Name: Shock absorber protection kit left+right
- Quality class: Q
Lisainfo: "Tootja: POLCAR
ALFA ROMEO 33
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MAX
-
Fitting Position: Front Axle,
Front Axle both sides - Suspension: for vehicles with standard suspension
- Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
BMW/FIAT/SKODA FABIA
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
BMW/FIAT/SKODA FABIA
(kvaliteediklass: PJ)"
- Weight [kg]: 0.085
- Packaging length [cm]: 7.9
- Packaging width [cm]: 2.4
- Packaging height [cm]: 2.4
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
- Name: MM APK0004
- Fitting Position: Front Axle
-
Lisainfo: Dust Cover Kit,
shock absorber -
Additional information: Dust Cover Kit,
shock absorber
- Fitting Position: Front Axle
- Suspension: for vehicles without electronic suspension control
- Quantity per packing unit: 2
- Guarantee: 5 years guarantee
- Weight [kg]: 0.4
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane), Thermoplast - Weight [g]: 247
- Component Number: 4
- Name: IM 50186
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Suspension: for vehicles with bad road version
- Fitting Position: Rear Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- for special equipment code: S815A
- Installatsiooni pool: Tagasild
- Manufacturer: FEBEST
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
-
Name: BI 11-
101321 - Manufacturer: BILSTEIN
- Quality class: Q
Additional information: "Tootja: BILSTEIN
BMW 3(E30)
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
BMW 3(E30)
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks