Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Manufacturer Restriction: ATE
- Length [mm]: 575
- Number of wear indicators [per axle]: 1
- Net weight [kg]: 0.03
- Fitting Position: Rear Axle
- Brake System: Teves
- Height [mm]: 59.2
- Width [mm]: 123
- Thickness [mm]: 17.2
- Wear Warning Contact: prepared for wear warning indicator
-
Lisainfo: Brake pad set,
rear, 16.3 mm -
Additional information: Brake pad set,
rear, 16.3 mm
- Fitting Position: Front Axle
- Wear Warning Contact: excl. wear warning contact
- Height [mm]: 73.2
- Width [mm]: 156
- Thickness [mm]: 19.5
- Brake System: ATE
-
Lisainfo: Brake pad set,
front, 19.3 mm -
Additional information: Brake pad set,
front, 19.3 mm
- Fitting Position: Rear Axle
- Number of wear indicators [per axle]: 1
- Supplementary Article/Info 2: with cable
- Length [mm]: 623
- Wear Warning Contact: Change warning contact together with the pads
- Brake Type: Disc Brake
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Brake System: ATE
- Length [mm]: 625
- Supplementary Article/Supplementary Info: Axle Kit
- Manufacturer: QUICK BRAKE
- Name: QB WS0154A
- Fitting Position: Rear Axle
- Length [mm]: 620
- Brake Type: Disc Brake
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Brake Type: Disc Brake
- Fitting Position: Front Axle
- Length [mm]: 570
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MAX
- Installatsiooni pool: Tagasild
- Piduriliik: Ketaspidur
-
Kaal (kg): 0,
022 - Hoiatuskontakti pikkus (mm): 620
- Manufacturer: TOMEX C
- Brake Type: Disc Brake
- Fitting Position: Rear Axle
- Length [mm]: 580
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MAX
- Length [mm]: 550
-
Fitting Position: Front Axle Left,
Front Axle Right - Brake Type: Disc Brake
- Weight [kg]: 0.01
-
Manufacturer: FEBI-
UKLAD HAMULCOWY
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Brake Type: Disc Brake
- Fitting Position: Rear Axle
- Warning Contact Length [mm]: 620
- Required quantity: 1
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: MEY
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 620
- Number of wear indicators [per axle]: 1
- Name: BR A 00 233
- Manufacturer: BREMBO
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Weight [kg]: 0.028
- Warning Contact Length [mm]: 570
- Manufacturer: TOMEX C
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 570
- Manufacturer: TRW
- Quality class: Q
- Name: Wear indicator
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 570
- Number of wear indicators [per axle]: 1
- Name: BR A 00 232
- Manufacturer: BREMBO
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Brake System: ATE
- Length [mm]: 570
- Supplementary Article/Supplementary Info: Axle Kit
- Manufacturer: QUICK BRAKE
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 570
- Packaging length [cm]: 26
- Packaging width [cm]: 15
- Packaging height [cm]: 1
- Weight [kg]: 0.022
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: TEX
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Braking/Driving Dynamics: for vehicles with ABS
- Brake Type: Disc Brake
- Length [mm]: 620
- Weight [kg]: 0.02
- Number of wear indicators [per axle]: 1
- Manufacturer: ABS
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 620
- Packaging length [cm]: 26
- Packaging width [cm]: 15
- Packaging height [cm]: 1
- Weight [kg]: 0.019
-
Name: HOIATUSKONTAKT,
PIDURIKLOTSI KULUMINE - Manufacturer: TEX
-
Fitting Position: Front Axle Left,
Front Axle Right - Brake Type: Disc Brake
- Length [mm]: 570
- Weight [kg]: 0.03
- Number of wear indicators [per axle]: 1
- Manufacturer: ABS
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 625
- Manufacturer: TRW
- Quality class: Q
- Name: Wear indicator
SVHC: No information available, please contact the manufacturer!
- Required quantity: 1
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 569
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: ATE
- Required quantity: 1
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 620
-
Name: Hoiatuskontakt,
piduriklotsi kulumine - Manufacturer: ATE
- Quality class: Q
- Fitting Position: Front Axle
- Length [mm]: 570
- Brake Type: Disc Brake
- Manufacturer: BOSCH
- Fitting Position: Rear Axle
- Brake System: ATE
- Width [mm]: 123
- Height [mm]: 59.2
- Thickness [mm]: 17.3
- Test Mark: ECE R90
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Rear Axle
- Width [mm]: 123
- Thickness [mm]: 17
- Height [mm]: 59
- Wear Warning Contact: excl. wear warning contact
- Brake System: ATE
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 123
- Height [mm]: 59
- Thickness [mm]: 17
- WVA Number: 21487
- Test Mark: ECE R90 APPROVED
- for OE number: 34216761248
- Manufacturer: ASHIKA
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 123
- Height [mm]: 59
- Thickness [mm]: 17
- WVA Number: 21487
- Test Mark: ECE R90 APPROVED
- for OE number: 34216761248
- Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Width [mm]: 123
- Thickness [mm]: 17.3
- Height [mm]: 59.2
- Brake System: ATE
- Manufacturer: DENCKERMANN ZAWIESZENIE
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Fitting Position: Rear Axle
- Braking/Driving Dynamics: for vehicles with ABS
- Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
-
Kõrgus 1 (mm): 59,
4 - Pidurisüsteem: ATE
- Laius 1 (mm): 123
-
Jämedus/Tugevus 1 (mm): 17,
3 - Manufacturer: JPN
- Manufacturer Restriction: ATE
- Height [mm]: 59.2
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- Fitting Position: Rear Axle
- Width [mm]: 123
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MAX
- Fitting Position: Rear Axle
- Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
-
Kõrgus 1 (mm): 59,
4 - Pidurisüsteem: ATE
- Laius 1 (mm): 123
-
Jämedus/Tugevus 1 (mm): 17,
3 - Manufacturer: PROFIPOWER
- Fitting Position: Front Axle
- Brake System: ATE
- Width 1 [mm]: 156.3
- Height [mm]: 73.2
- Thickness [mm]: 19.5
- Test Mark: ECE R90
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 123.1
- Height [mm]: 59.2
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
-
Manufacturer: AUTO-
GH
- Brake System: Ate
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Height 1 [mm]: 59.2
- Wear Warning Contact: prepared for wear warning indicator
- Vibration: with vibration damper
- Width 1 [mm]: 123
- Thickness 1 [mm]: 17
- Manufacturer: METELLI UKL.HAMULCOWY
- Fitting Position: Front Axle
- Width [mm]: 156
- Thickness [mm]: 19
- Height [mm]: 73
- Wear Warning Contact: excl. wear warning contact
- Brake System: ATE
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Width [mm]: 156.5
- Height [mm]: 73.6
- Thickness [mm]: 19.3
- Wear Warning Contact: prepared for wear warning indicator
-
WVA Number: 21486,
21642 - Fitting Position: Front Axle
- for OE number: 34116761252
- Manufacturer: ASHIKA
- for OE number: 34 21 6 761 248
- Fitting Position: Rear Axle
- Manufacturer: TRUCKTEC
- Fitting Position: Front Axle
- Width [mm]: 156.3
- Thickness [mm]: 19.5
- Height [mm]: 73.2
- Brake System: ATE
- Manufacturer: DENCKERMANN ZAWIESZENIE
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Width [mm]: 156.5
- Height [mm]: 73.6
- Thickness [mm]: 19.3
- Wear Warning Contact: prepared for wear warning indicator
-
WVA Number: 21486,
21642 - Fitting Position: Front Axle
- for OE number: 34116761252
- Manufacturer: JAPKO
- Length [mm]: 123.1
- Width [mm]: 59.2
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.238
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Quantity per packing unit: 4
-
FMSI Code: D436-
7298 D436- 7549 -
Test Mark: E1 90R-
01881/ 560 - Brake System: Sumitomo
-
Supplementary Article/Info 2: without anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
WVA Number: 21679,
21680, 21681 -
Friction Lining Material: Low-
Metallic - Wear Warning Contact: with acoustic wear warning
- Width 1 [mm]: 119.4
- Width 2 [mm]: 119.2
- Height 1 [mm]: 68.1
- Height 2 [mm]: 73.5
- Thickness 1 [mm]: 14.5
- Thickness 2 [mm]: 14.5
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Fitting Position: Rear Axle
- Brake System: TEVES
- Width [mm]: 123
- Height [mm]: 59.2
- Thickness [mm]: 17.3
- Wear Warning Contact: without integrated wear sensor
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - WVA Number: 21487
- Weight [kg]: 1.157
- Manufacturer: VALEO
- Name: VA 301580
- Length [mm]: 123
- Width [mm]: 59
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.238
- Observe service information:
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 4
- Installatsiooni pool: Esisild
-
Kõrgus (mm): 73,
2 -
Jämedus/Tugevus (mm): 18,
3 - Piduriklots: Lõigatud servaga
-
Laius (mm): 156,
3 - Pidurisüsteem: Teves
- Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
- täidab ECE-normi: ECE R90
- WVA-number: 21486
- Piirangutega toode/piirangu info 2: ilma kruvideta
- Piirangutega toode/piirangu info: distantsseibidega
- Manufacturer: VASCO BREYKO
- Article number of recommended accessories: 98019800
- Height [mm]: 73.6
- Thickness [mm]: 19.3
- Wear Warning Contact: prepared for wear warning indicator
- directional:
- Brake System: Teves
- Fitting Position: Front Axle
- Width [mm]: 157
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MAX
- Quantity per packing unit: 4
- Fitting Position: Rear Axle
- Thickness [mm]: 17
- Width [mm]: 123.1
- Height [mm]: 59.2
- Wear Warning Contact: prepared for wear warning indicator
- Brake System: ATE
- Weight [kg]: 1.1
-
Manufacturer: TOMEX-
C
- Length [mm]: 123.1
- Width [mm]: 59.2
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.238
- Name: SW 20 91 6175
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 156.4
- Height [mm]: 73.6
- Thickness [mm]: 19
- Wear Warning Contact: prepared for wear warning indicator
-
Manufacturer: AUTO-
GH
- Fitting Position: Rear Axle
- Width [mm]: 123.2
- Height [mm]: 59.4
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- Brake System: ATE
-
Supplementary Article/Info 2: with anti-
squeak plate -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MEY
- Installatsiooni pool: Tagasild
- Jämedus/Tugevus (mm): 16
-
Pikkus (mm): 123,
5 -
Kõrgus (mm): 59,
2 - Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
-
Pidurisüsteem: Ate-
teves - Manufacturer: DRIVE
- Fitting Position: Rear Axle
- Jämedus/Tugevus (mm): 16
-
Pikkus (mm): 123,
2 -
Kõrgus (mm): 59,
2 - Pidurisüsteem: Continental
- Manufacturer: DRIVE
- Fitting Position: Front Axle
- Brake System: TEVES
- Width [mm]: 157
- Height [mm]: 74
- Thickness [mm]: 19.3
- Wear Warning Contact: without integrated wear sensor
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - WVA Number: 23449
- Weight [kg]: 2.25
- Manufacturer: VALEO
- Name: VA 301412
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
FMSI Code: D683-
7427 -
Test Mark: E9 90R-
01825/ 785 - Brake System: Continental
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
WVA Number: 21282,
21487 -
Friction Lining Material: Low-
Metallic - Wear Warning Contact: prepared for wear warning indicator
- Width 1 [mm]: 123.5
- Width 2 [mm]: 123.1
- Height 1 [mm]: 59.2
- Height 2 [mm]: 59.2
- Thickness 1 [mm]: 16.5
- Thickness 2 [mm]: 16.5
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP1803
- Brake System: Ate
- Fitting Position: Front Axle
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Height 1 [mm]: 73.1
- Wear Warning Contact: prepared for wear warning indicator
- Vibration: with vibration damper
- Width 1 [mm]: 156.3
- Thickness 1 [mm]: 19
- Manufacturer: METELLI UKL.HAMULCOWY
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 17
- Length [mm]: 123
- Height [mm]: 59.8
- Wear Warning Contact: prepared for wear warning indicator
- Brake Lining: With bevelled edges
- Brake System: Teves
-
WVA Number: 21282,
21487 - Name: SK VKBP90279
- Manufacturer: SKF
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Width [mm]: 123
- Thickness [mm]: 17
- Height [mm]: 59
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article/Supplementary Info: with accessories
- Brake System: Teves
-
Supplementary Article/Info 2: with piston clip,
with anti- squeak plate -
WVA Number: 21282,
21487 - Name: BR P 06 044
- Manufacturer: BREMBO
- Fitting Position: Rear Axle
- Width [mm]: 123.2
- Height [mm]: 59.4
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- Brake System: ATE
-
Supplementary Article/Info 2: with anti-
squeak plate - Quality: PREMIUM
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MEY
General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 123.1
- Height [mm]: 59.2
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
-
Test Mark: E9 90R -
01708/ 011 -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
- Quality class: Q
SVHC: No information available, please contact the manufacturer!
- Length [mm]: 156.4
- Width [mm]: 73.6
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 19
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 2.097
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Width [mm]: 156.3
- Height [mm]: 73.3
- Thickness [mm]: 18.9
- Brake System: ATE
-
Supplementary Article/Info 2: with anti-
squeak plate -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MEY
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
Brake System: ATE-
TEVES - Width [mm]: 123
- Height [mm]: 59
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- WVA Number: 21487
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
- Quantity per packing unit: 4
-
FMSI Code: D301-
7204 D681- 7560 -
Test Mark: E9 90R-
01841/ 1492 - Brake System: Continental
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
WVA Number: 21486,
21642 -
Friction Lining Material: Low-
Metallic - Wear Warning Contact: prepared for wear warning indicator
- Width 1 [mm]: 156.6
- Width 2 [mm]: 156.4
- Height 1 [mm]: 73.6
- Height 2 [mm]: 73.6
- Thickness 1 [mm]: 18.5
- Thickness 2 [mm]: 18.5
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP1003
- Fitting Position: Front Axle
- Quantity per packing unit: 4
-
FMSI Code: D639-
7517 -
Test Mark: E9 90R-
01841/ 1490 - Brake System: Brembo
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
- WVA Number: 21471
-
Friction Lining Material: Low-
Metallic - Wear Warning Contact: prepared for wear warning indicator
- Width 1 [mm]: 120.5
- Width 2 [mm]: 120.6
- Height 1 [mm]: 73.7
- Height 2 [mm]: 73.7
- Thickness 1 [mm]: 17.5
- Thickness 2 [mm]: 17.5
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP1584
- Fitting Position: Front Axle
- Article number of recommended accessories: 98019800
- Width [mm]: 157
- Height [mm]: 73.6
- Thickness [mm]: 19.3
- Wear Warning Contact: prepared for wear warning indicator
- directional:
- Brake System: Teves
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: QUARO
- Fitting Position: Front Axle
- Brake System: ATE
- WVA Number: 21486
- Length 1 [mm]: 156.5
- Height 1 [mm]: 73.2
- Thickness 1 [mm]: 19.3
- Wear Warning Contact: prepared for wear warning indicator
- Manufacturer: MAGNETI MARELLI
- Length [mm]: 156.4
- Width [mm]: 73.6
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 19
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 2.097
- Name: SW 20 91 6345
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 4
- Fitting Position: Front Axle
- Thickness [mm]: 19
- Width [mm]: 156.4
- Height [mm]: 73.5
- Wear Warning Contact: prepared for wear warning indicator
- Brake System: ATE
- Weight [kg]: 1.96
-
Manufacturer: TOMEX-
C
- Fitting Position: Rear Axle
-
Article number of recommended accessories: 8DK 355 250-
201, 8DZ 355 201- 251 - Quantity per packing unit: 4
- Width [mm]: 123.2
- Height [mm]: 59.2
- Thickness [mm]: 17.2
- Wear Warning Contact: prepared for wear warning indicator
- WVA Number: 21487
- Brake System: Teves
- Assy./disassy. by qualified personnel required!:
- Name: HE 8DB355008091
- Manufacturer: HELLA PAGID
- Fitting Position: Rear Axle
- Brake System: TEVES
- Width [mm]: 123
- Height [mm]: 59.5
- Thickness [mm]: 17.3
- Wear Warning Contact: without integrated wear sensor
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - WVA Number: 21487
- Weight [kg]: 1.12
- Manufacturer: VALEO
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 18.8
- Length [mm]: 156.8
- Height [mm]: 73.1
- Wear Warning Contact: prepared for wear warning indicator
- Brake Lining: With bevelled edges
- Brake System: Teves
-
WVA Number: 21486,
21642 - Manufacturer: SKF KLOCKI HAM
- Length [mm]: 156
- Width [mm]: 74
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 19
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 2.097
- Observe service information:
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Braking/Driving Dynamics: for vehicles with ABS
- Width 1 [mm]: 156.4
- Height 1 [mm]: 73.6
- Thickness 1 [mm]: 19
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.99
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Fitting Position: Rear Axle
- Product must be determined on the vehicle or the motor:
-
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 21486
- Thickness [mm]: 16
- Width [mm]: 123.2
- Height [mm]: 59.4
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: BOS
Supplementary Article/Info 2: with mounting manual, with anti-squeak plate, with piston clip Article number of recommended accessories: 1987474154, 1987473001, 1987473010, 1987473048, 1987474268, 1987474955, 1987474456, 1987474583, 1987474940, 1987474944, 1987474946, 1987474366
- Fitting Position: Front Axle
- Width [mm]: 156.3
- Height [mm]: 73.3
- Thickness [mm]: 18.9
- Brake System: ATE
-
Supplementary Article/Info 2: with anti-
squeak plate - Quality: PREMIUM
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: MEY
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.
- Fitting Position: Rear Axle
-
Article number of recommended accessories: 98019900,
82057500 - Width [mm]: 123.2
- Height [mm]: 59.2
- Thickness [mm]: 17.2
- WVA Number: 21487
- Packaging length [cm]: 15.2
- Packaging width [cm]: 8.8
- Packaging height [cm]: 8.4
- Weight [kg]: 1
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TEX
- Installatsiooni pool: Esisild
-
Jämedus/Tugevus (mm): 17,
8 -
Pikkus (mm): 156,
7 -
Kõrgus (mm): 73,
2 - Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
-
Pidurisüsteem: Ate-
teves - Manufacturer: DRIVE
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 123.1
- Height [mm]: 59.2
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
-
Test Mark: E9 90R-
02A1148/ 0785 -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Article number of recommended accessories: 98019800
- Width [mm]: 157
- Height [mm]: 73.6
- Thickness [mm]: 19.3
- Wear Warning Contact: prepared for wear warning indicator
- directional:
- Brake System: Teves
- Friction Lining Material: Ceramic
-
Name: Piduriklotsi komplekt,
ketaspidur - Manufacturer: QUARO
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 156.4
- Height [mm]: 73.6
- Thickness [mm]: 19
- Wear Warning Contact: prepared for wear warning indicator
-
Test Mark: E9 90R 01705/
035 Ext -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
- Quality class: Q
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Brake System: ATE
- Supplementary Article/Supplementary Info: without accessories
- Supplementary Article/Info 2: with piston clip
- Width [mm]: 123
- Height [mm]: 59.4
- Height 1 [mm]: 59.4
- Thickness [mm]: 17.2
-
WVA Number: 21282,
21487 - Test Mark: R90 Homologated
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.3
- Packing Type: Carton
- Packaging length [cm]: 16.8
- Packaging width [cm]: 9.7
- Packaging height [cm]: 6.2
- Manufacturer: JURID
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Width [mm]: 157
- Thickness [mm]: 19
- Height [mm]: 74
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article/Supplementary Info: with accessories
- Brake System: Teves
-
Supplementary Article/Info 2: with piston clip,
with anti- squeak plate -
WVA Number: 21486,
21642 - Manufacturer: BREMBO
- Name: BR P 06 021
- Fitting Position: Front Axle
-
Supplementary Article/Info 2: with piston clip,
with anti- squeak plate - Product must be determined on the vehicle or the motor:
-
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 21486
- Thickness [mm]: 19.05
- Width [mm]: 156.2
- Height [mm]: 73.3
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: BOS
Article number of recommended accessories: 1987474217, 1987474322, 1987474373, 1987474958, 1987474627, 1987474945, 1987474954, 1987474410
- Fitting Position: Front Axle
-
Article number of recommended accessories: 8DK 355 250-
191, 8DZ 355 201- 281, 8DZ 355 201- 551 - Quantity per packing unit: 4
- Width [mm]: 156.5
- Height [mm]: 73.6
- Thickness [mm]: 19.3
- Wear Warning Contact: prepared for wear warning indicator
- directional:
- WVA Number: 21486
- Brake System: Teves
- Weight [kg]: 2
- Assy./disassy. by qualified personnel required!:
- Name: HE 8DB355008281
- Manufacturer: HELLA PAGID
- Fitting Position: Rear Axle
- Width [mm]: 123
- Height [mm]: 59.2
- Thickness [mm]: 17.3
- Brake System: ATE
-
Test Mark: E1 90R-
02A0525/ 0487, E9 90R- 02A1163/ 0785 - MAPP code available:
- Observe dimensions:
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: ATE
- Quality class: Q
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0209.2, 24.8190-0218.2, 24.8190-0221.2, 24.8190-0226.2, 24.8190-0228.2, 24.8190-0241.2, 24.8190-0245.2, 24.8190-1308.2
- Fitting Position: Front Axle
- Quantity per packing unit: 4
-
Brake System: ATE-
TEVES - Width [mm]: 156
- Height [mm]: 73
- Thickness [mm]: 19
- Wear Warning Contact: prepared for wear warning indicator
- WVA Number: 21486
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
-
Article number of recommended accessories: 98019800,
82059100 - Width [mm]: 156.5
- Height [mm]: 73.6
- Thickness [mm]: 19.3
- Wear Warning Contact: prepared for wear warning indicator
- directional:
- WVA Number: 21486
- Brake System: Teves
- Observe mounting information:
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8.3
- Weight [kg]: 2
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TEX
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 156.4
- Height [mm]: 73.6
- Thickness [mm]: 19
- Wear Warning Contact: prepared for wear warning indicator
-
Test Mark: E9 90R-
02A1062/ 1492 -
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: TRW
Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Brake System: ATE
- Supplementary Article/Supplementary Info: without accessories
- Width [mm]: 156
- Height [mm]: 74
- Height 1 [mm]: 74
- Thickness [mm]: 18
- WVA Number: 21486
- Test Mark: R90 Homologated
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 2.12
- Packing Type: Carton
- Packaging length [cm]: 20.6
- Packaging width [cm]: 12.2
- Packaging height [cm]: 7.8
- Manufacturer: JURID
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
-
Brake System: ATE-
TEVES - Width [mm]: 123
- Height [mm]: 59
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- WVA Number: 21487
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
- Fitting Position: Rear Axle
- Width [mm]: 123
- Height [mm]: 59.2
- Thickness [mm]: 17.3
- Brake System: ATE
-
Test Mark: E1 90R-
02A0258/ 0339 - MAPP code available:
- Observe dimensions:
- Permissible up to vehicle capacity [kW]: 225
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: ATE
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0209.2, 24.8190-0218.2, 24.8190-0221.2, 24.8190-0226.2, 24.8190-0228.2, 24.8190-0241.2, 24.8190-0245.2, 24.8190-1308.2 Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
- Width [mm]: 156.3
- Height [mm]: 73.2
- Thickness [mm]: 19.5
- Brake System: ATE
-
Test Mark: E1 90R-
02A0334/ 0382 - MAPP code available:
- Observe dimensions:
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: ATE
- Quality class: Q
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0208.2, 24.8190-0219.2, 24.8190-0225.2, 24.8190-0254.2
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Braking System: Low dust brake pads
-
Brake System: ATE-
TEVES - Width [mm]: 123
- Height [mm]: 59
- Thickness [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- WVA Number: 21487
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
- Fitting Position: Front Axle
- Width [mm]: 156.3
- Height [mm]: 73.2
- Thickness [mm]: 19.5
- Brake System: ATE
-
Test Mark: E1 90R-
02A0258/ 0292 - MAPP code available:
- Observe dimensions:
- Permissible up to vehicle capacity [kW]: 225
-
Name: PIDURIKLOTSI KOMPLEKT,
KETASPIDUR - Manufacturer: ATE
- Quality class: Q
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0208.2, 24.8190-0219.2, 24.8190-0225.2, 24.8190-0254.2 Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Braking System: Low dust brake pads
-
Brake System: ATE-
TEVES - Width [mm]: 156
- Height [mm]: 74
- Thickness [mm]: 19
- Wear Warning Contact: prepared for wear warning indicator
- WVA Number: 21486
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Test Mark: ECE R90 APPROVED
- Manufacturer: ZIMMERMANN
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks