Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year from: 06.1994
-
Thread Size: M12x1,
5 -
Name: Andur,
sisendohu temperatuur - Manufacturer: MAX
- Number of pins: 2
- Socket colour: black
- Connector Shape: rectangular
-
Thread Size: M 14x1,
5 - Sensor Type: NTC Sensor
- Spanner Size: 19 mm
- for OE number: 12621710535
- Manufacturer: MEAT&DORIA
-
Thread Size: M14x1,
5 - Colour: white
- Spanner Size: 19
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Connector Shape: rectangular
- Number of pins: 2
- Resistor [kOhm]: 2.5
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Thread Size: M14x1,
5 - Number of pins: 2
- Housing Colour: white
- Manufacturer: FAE ELEKTRYKA
-
Engine Code: M60 B30
(308S1) - Colour: white
-
Thread Size: M14x1,
5 - Spanner Size: 19
- Corresponds to the original part in colour: black
- Name: EP 1.830.126
- Manufacturer: EPS
-
Engine Code: M60 B30
(308S1) - Colour: black
-
Thread Size: M14x1,
5 - Spanner Size: 19
- Name: EP 1.830.176
- Manufacturer: EPS
-
Engine Code: M60 B30
(308S1) - Colour: black
-
Thread Size: M14x1,
5 - Spanner Size: 19
- Manufacturer: FACET
- Number of pins: 2
- Socket colour: black
- Connector Shape: rectangular
-
Thread Size: M 12x1,
5 - Spanner Size: 19
- Fitting Depth [mm]: 51
- Overall Length [mm]: 73
- for OE number: 55715
- Manufacturer: MEAT&DORIA
- Number of pins: 3
- Operating Mode: Mechanical
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: DLP
- Number of pins: 3
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Length [mm]: 560
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Thread Size: M12x1.5
-
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: VER
- Length [mm]: 540
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.1
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV492
- Manufacturer: ESEN SKV
- Construction Year from: 06.1994
- Thread Size: 14 mm
- Manufacturer: BOSCH
- Number of pins: 3
-
Name: Andur,
drosselklapiasend - Manufacturer: MAX
- Length [mm]: 120
- Number of pins: 3
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: DLP
- Additional information: SS10965 DELPHI
- Lisainfo: SS10965 DELPHI
- Construction Year from: 06.1994
-
Oxygen Sensor: Regulating Sensor,
Heated - Fitting Position: before catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Oxygen Sensor: Regulating Sensor
- Manufacturer: ASHIKA
-
Lisainfo: 43-
U04 -
Additional information: 43-
U04
- Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
- Length [mm]: 870
- Number of circuits: 4
- Weight [kg]: 0.15
- Resistor [Ohm]: 6
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
-
Engine Code: M60 B30
(308S1) - Length [mm]: 560
-
Name: ANDUR,
NUKKVOLLIPOSITSIOON - Manufacturer: EPS
- Voltage [V]: 12
- Length [mm]: 560
- Sensor Type: Inductive Sensor
- Number of pins: 3
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Oxygen Sensor: Heated,
Regulating Sensor -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Fitting Position: before catalytic converter
- Cable Length [mm]: 582
- Weight [kg]: 0.104
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Oxygen Sensor: Regulating Sensor
- Exhaust System: before catalytic converter
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 830
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
11 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV031
- Manufacturer: ESEN SKV
- Number of pins: 3
- Connector Shape: rectangular
- Number of mounting bores: 2
- Rotation Direction: Clockwise rotation
- Supplementary Article/Info 2: without cable
- Voltage [V]: 5
- for OE number: 13631721456
-
Name: Andur,
drosselklapiasend - Manufacturer: MD
- Construction Year from: 06.1994
- Manufacturer: BOSCH
-
Oxygen Sensor: Heated,
Regulating Sensor -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Fitting Position: before catalytic converter
- Cable Length [mm]: 582
- Weight [kg]: 0.104
- Name: SW 33 10 4084
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 06.1994
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Housing Type: with housing
- Number of pins: 4
- Mounting Type: Bayonet
- Connector Shape: round
- Housing material: Plastic
- Recommended additional repairs: Air Filter
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 4
- Name: Ohumassimootja
- Manufacturer: MAX
- Number of connectors: 3
- Rated Voltage [V]: 5
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 4
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.35
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 4
- Name: OHUMASSIMOOTJA
- Manufacturer: BRM
- Operating Mode: Electric
- Name: OHUMASSIMOOTJA
- Manufacturer: MAG
- Number of pins: 9
- Guarantee: 3 years guarantee
- Weight [kg]: 0.08
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV424
-
Engine Code: M60 B30
(308S1) - Operating Mode: Electric
- Voltage [V]: 12
- Manufacturer: PIERBURG
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks