• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Pikkus (mm): 575
• Kulumisnäidikute arv [ühe telje kohta]: 1
• Netokaal [kg]: 0,03

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE
• Manufacturer: JP GROUP A/S
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Pikkus (mm): 16
• Keermemõõt: M8x1,25
• Pöördeliik: koos väliskeermega
• Võtmekaugus: Hex-6
• Name: Kruvi,piduriketas
• Manufacturer: QBK
• Lisainfo: M8x1.25 16,0mm Hex-6 2tk
• Additional information: M8x1.25 16,0mm Hex-6 2tk

• Pikkus (mm): 15,5
• Väliskeerme mõõde: M8 x 1,25
• Kvaliteet/klass: 10.9
• Võtmekaugus: 6
• Kruvipea-/Mutriprofiil: sisekuuskant
• Pealispind: fosfeeritud
• Installatsiooni pool: Esisild, Tagasild
• Kaal (kg): 0,01
• Manufacturer: FEBI
• Quantity per packing unit: 2

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Ate
• Name: Lisakomplekt,Pidurisadul
• Manufacturer: MAX

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Ate
• Manufacturer: AUTOFREN SEINSA
• Additional information: D42483A
• Lisainfo: D42483A

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Pikkus (mm): 15,7
• Keermemõõt: M8X1,25
• Materjal: Metall
• Pealispind: Kroom-(VI)-vaba passiveerimine
• Kruvipea-/Mutriprofiil: sisekuuskant
• ka universaaltootena saadav vaata toode-nr.: TPM1000
• Name: Kruvi,piduriketas
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Brake System: ATE
• Name: LISAKOMPLEKT, KETASPIDURIKLOTSID
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Pikkus (mm): 625
• Piirangutega toode/piirangu info: Sillakomplekt
• Manufacturer: QUICK BRAKE
• Name: QB WS0154A

• Installatsiooni pool: Tagasild
• Pikkus (mm): 620
• Piduriliik: Ketaspidur
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Brake System: ATE
• Pikkus (mm): 585
• Piirangutega toode/piirangu info: Sillakomplekt
• Manufacturer: QUICK BRAKE
• Name: QB WS0205A

• Installatsiooni pool: Tagasild
• Pidurisüsteem: Teves
• Kaal (kg): 0,044
• Manufacturer: TOMEX C

• Piduriliik: Ketaspidur
• Installatsiooni pool: Esisild
• Pikkus (mm): 570
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Installatsiooni pool: Tagasild
• Pidurisüsteem: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 901201

• Piduriliik: Ketaspidur
• Installatsiooni pool: Tagasild
• Pikkus (mm): 580
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Brake System: ATE
• Quantity per packing unit: 2
• Manufacturer: DELPHI LOCKHEED HAMULCE

Additional information: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
X3 (E83), 01.04-
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 620
• Kulumisnäidikute arv [ühe telje kohta]: 1
• Name: BR A 00 233
• Manufacturer: BREMBO

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: MAX

• Fitting Position: Front Axle
• Brake System: ATE
• Name: Lisakomplekt, ketaspiduriklotsid
• Manufacturer: QBK
• Additional information: QB109-1223
• Lisainfo: QB109-1223

• Fitting Position: Front Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 570
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

• Fitting Position: Front Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 570
• Kulumisnäidikute arv [ühe telje kohta]: 1
• Name: BR A 00 232
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 570
• pakendi pikkus [cm]: 26
• pakendi laius [cm]: 15
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,022
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 620
• pakendi pikkus [cm]: 26
• pakendi laius [cm]: 15
• pakendi kõrgus [cm]: 1
• Kaal (kg): 0,019
• Name: HOIATUSKONTAKT, PIDURIKLOTSI KULUMINE
• Manufacturer: TEX

• Fitting Position: Rear Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 625
• SVHC: Infot ei ole, palun pöörduge tootja poole!
• Manufacturer: TRW
• Quality class: Q
• Name: Wear indicator

• Required quantity: 1
• Fitting Position: Front Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 569
• Manufacturer: ATE

• Required quantity: 1
• Fitting Position: Rear Axle
• Piduriliik: Ketaspidur
• Pikkus (mm): 620
• Manufacturer: ATE
• Quality class: Q
• Name: Wear indicator

• Installatsiooni pool: Esisild
• Pidurisüsteem: ATE
• Manufacturer: PROFIPOWER

• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: HCA-BM-016
• Manufacturer: NTY

• Installatsiooni pool: Esisild
• Pidurisüsteem: Brembo
• Manufacturer: FRENKIT

• Fitting Position: Front Axle
• Pikkus (mm): 570
• Piduriliik: Ketaspidur
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Manufacturer: ATE
• Quality class: Q
• Name: Brake pads fitting kit

• Fitting Position: Rear Axle
• Brake System: ATE
• Manufacturer: BOSCH

• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 605
• Pistikkontaktide arv: 2
• Anduritüüp: Hallsensor
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild
• Kaablipikkus (mm): 1 030
• Pistikkontaktide arv: 2
• Anduritüüp: Hallsensor
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 550
• Pistikkontaktide arv: 2
• Anduritüüp: Hallsensor
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Anduritüüp: Aktiivne andur
• vajaminev tükihulk: 2
• Kaablipikkus (mm): 1 070
• Pistikkontaktide arv: 2
• Installatsiooni pool: Tagasild
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Installatsiooni pool: Esisild, esisild vasakul
• paaris tootenumbrid: GH-701502H
• Manufacturer: AUTO-GH

• Construction Year to: 09.1998
• Anduritüüp: Aktiivne andur
• vajaminev tükihulk: 2
• Kaablipikkus (mm): 607
• Pistikkontaktide arv: 2
• Installatsiooni pool: Esisild
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Transmission Type: Manual Transmission, Automatic Transmission
• Anduritüüp: Aktiivne andur
• vajaminev tükihulk: 2
• Kaablipikkus (mm): 610
• Pistikkontaktide arv: 2
• Installatsiooni pool: Esisild
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Anduritüüp: Hallsensor
• Kaablipikkus (mm): 1 009
• Pistikkontaktide arv: 2
• Installatsiooni pool: Tagasild
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ümar
• pikkus üle kõige (mm): 1 070
• Anduritüüp: Hallsensor
• Installatsiooni sügavus (mm): 34,5
• Installatsiooni pool: Tagasild paremal, Tagasild vasakul
• OE-numbri jaoks: 34526756374
• Manufacturer: MEAT&DORIA

• Pistikkontaktide arv: 2
• Pistikukatte kuju: ümar
• pikkus üle kõige (mm): 650
• Anduritüüp: Hallsensor
• Installatsiooni sügavus (mm): 25,5
• Installatsiooni pool: esisild paremal, esisild vasakul
• OE-numbri jaoks: 34526756373
• Manufacturer: MEAT&DORIA

• Kaablipikkus (mm): 605
• Installatsiooni pool: esisild paremal, esisild vasakul
• Manufacturer: SNR /NTN-SNR/
• Name: SN ASB150.10

• Fitting Position: Right, Left, Front Axle
• Kaablipikkus (mm): 650
• Manufacturer: SNR /NTN-SNR/

• Kaablipikkus (mm): 1 030
• Installatsiooni pool: Tagasild paremal, Tagasild vasakul
• Manufacturer: SNR /NTN-SNR/

• Fitting Position: Right, Left, Rear Axle
• Kaablipikkus (mm): 1 030
• Name: SN ASB150.22
• Manufacturer: NTN-SNR

• Construction Year from: 10.1998
• Fitting Position: Rear Axle
• Anduritüüp: Aktiivne andur
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 1 070
• temperatuurivahemik alates [°C]: −40
• Temperatuurivahemik kuni [°C]: 150
• Manufacturer: BOSCH