Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)






-
Engine Code: M62 B35
(358S2) - Required quantity: 8
- Quantity per packing unit: 4
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Electrode Gap [mm]: 1
- Thread Size: M14x1.25
- Thread Length [mm]: 19
- Diameter [mm]: 14
- for OE number: 1WT318110
- Connector type: Solid SAE
- Spanner Size: 16 mm
- Tightening Torque [Nm]: 22
- Weight [g]: 43
- Gross Weight [g]: 46
-
alternative item: IK20TT,
IK20 - Manufacturer: DENSO
- Name: DN K20TT
- Lisainfo: DENK20TT
- Additional information: DENK20TT



- Quantity per packing unit: 10
- contains article number: 13516
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Electrode Gap [mm]: 0.8
-
Spark Plug: with gasket seat,
2 - Earthed Electrode - Manufacturer: FEBI
- Additional information: F13518
- Lisainfo: F13518
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.




























































-
Engine Code: M62 B35
(358S2) - Quantity: 8
-
Spark Plug: 2 -
Earthed Electrode - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
































-
Replace after km: 40,
000 - Required quantity: 8
- Electrode Gap [mm]: 0.9
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 6
- Number of pins: 2
- Name: STEKNAL
- Manufacturer: BOS





-
Engine Code: M62 B35
(358S2) - Required quantity: 8
- Quantity per packing unit: 10
-
Spark Plug: 2 -
Earthed Electrode, Nickel Middle Electrode - Electrode Gap [mm]: 1
- Thread Size: M14x1.25
- Thread Length [mm]: 19
- Diameter [mm]: 14
- for OE number: 7700500168
- Connector type: Removable SAE
- Spanner Size: 16 mm
- Tightening Torque [Nm]: 22
- Weight [g]: 43
- Gross Weight [g]: 46
- alternative item: K20TT
- Manufacturer: DENSO
- Name: DN K20TXR
- Additional information: K20TXR DENSO
- Lisainfo: K20TXR DENSO



-
Replace after km: 30,
000 - Required quantity: 8
- Electrode Gap [mm]: 0.9
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 5
- Number of pins: 4
-
Manufacturer: BOSCH SWIECE ZAPLONOWE/
ZAROWE




























































-
Replace after km: 40,
000 - Electrode Gap [mm]: 0.8
-
External Thread [mm]: M14 x 1,
25 - Spanner Size: 16
-
Spark Plug: 3 -
Earthed Electrode - Thread Length [mm]: 19
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


-
Engine Code: M62 B35
(358S2) -
Spark Plug: 1 -
Earthed Electrode, with resistor - Electrode Gap [mm]: 0.9
- Thread Size: M14 x 1.25
- Thread Length [mm]: 19
- Spanner Size: 16
-
Technical Information: Platinum-
tip - Manufacturer: MAGNETI MARELLI
-
Name: MM SPB7206-
9



- Tightening Torque [Nm]: 25
- Electrode Gap [mm]: 1
- Thread Size: M14 x 1.25
- Spanner Size: 16
-
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 19
- Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188706071
- Manufacturer: HELLA
































-
Fuel Type: CNG/
LPG -
Replace after km: 30,
000 - Required quantity: 8
- Electrode Gap [mm]: 0.7
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 4
- Number of pins: 1
- Name: STEKNAL
- Manufacturer: BOS





-
Engine Code: M62 B35
(358S2) - Required quantity: 8
-
Fuel Type: CNG/
LPG - Quantity per packing unit: 4
- Electrode Gap [mm]: 1
- Thread Size: M14x1.25
- Thread Length [mm]: 19
- Diameter [mm]: 14
- Connector type: Solid SAE
- Spanner Size: 16 mm
- Tightening Torque [Nm]: 22
- Weight [g]: 43
- Gross Weight [g]: 46
- alternative item: IK20TT
- Manufacturer: DENSO
- Name: DN IK20TT
- Quality class: Q
Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"