Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
for OE number: 11537583666,
11534561884 - Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
-
Name: AB 004-
028- 131
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Cylinder Head
- Section: Upper section
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Name: Voolik,
Karterituulutus - Manufacturer: DRM
- Climate Zones: not for cold climate zones
- Air Supply Hoses/Pipes: from cylinder head cover to intake
- Material: Plastic
- Colour: black
- Hose Length [mm]: 230
- Inner Diameter 1 [mm]: 26
- Inner Diameter 2 [mm]: 24
-
Name: Voolik,
Karterituulutus - Manufacturer: GAT
Manufacturer: METALCAUCHO
- Fitting Position: Cylinder Head
- for engine number: N 47
- Length [mm]: 62
- Width [mm]: 60
- Height [mm]: 15
- Manufacturer: METALCAUCHO
- Fitting Position: Cylinder Head
- Operating Mode: Pressure Controlled
- Valve Type: Breather Valve
- New Part:
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 0.36
- Manufacturer: ENERGY
- Fitting Position: Cylinder Head
- Operating Mode: Pressure Controlled
- Valve Type: Breather Valve
- Guarantee: 3 years guarantee
- New Part:
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 0.36
- Name: CE 31SKV036
- Manufacturer: ESEN SKV
- Engine Code: N47 D20 C
-
Engine sales name: N47N,
N47S1 - Section: Upper section
-
for OE number: 11 12 8 589 941,
11 12 8 570 828 - Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Manufacturer: METZGER
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: JP GROUP
Lisainfo: Pressure regulating valve for cylinder head cover ventilation Additional information: Pressure regulating valve for cylinder head cover ventilation
-
Engine sales name: N47,
N47S - Section: Upper section
- for OE number: 11 12 8 508 570
- Diameter [mm]: 60
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Manufacturer: METZGER
- for OE number: 7799224
- Manufacturer: MEAT & DORIA
- Engine Code: N47 D20 C
-
Valve Type: Diaphragm Valve,
Breather Valve - Observe the vehicle manufacturer specifications:
- Observe service information:
- Observe technical data:
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Filter type: for oil mist separator
- Length [mm]: 210
- Width [mm]: 55
- Height [mm]: 65
- Manufacturer: HENGST FILTER
- for OE number: 11 12 8 508 570
- Fitting Position: Cylinder Head
- Length [mm]: 62
- Height [mm]: 15
- Operating Mode: Pressure Controlled
-
Recommended change interval [km]: 60,
000 -
Valve Type: Breather Valve,
Diaphragm Valve - Recommended change interval [years]: 3
- Width [mm]: 60
- Observe the vehicle manufacturer specifications:
- Housing material: Polyamid 6.6
-
Seal Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Observe technical data:
- Observe service information:
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.208
- Manufacturer: METALCAUCHO
- Fitting Position: Cylinder Head
- Width [mm]: 90
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Recommended change interval [years]: 3
- Observe service information:
- Height [mm]: 95
- Observe technical data:
-
Supplementary Article/Info 2: with cyclone filter,
with bolts/ screws - Full Set:
-
Recommended change interval [km]: 60,
000 - Length [mm]: 230
- Bolt Head-/Nut Design: Hexagon Socket
- Valve Type: Breather Valve
- Observe the vehicle manufacturer specifications:
- Operating Mode: Pressure Controlled
- Housing material: Polyamid 6.6
-
Seal Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks