• Material: Plastic
• Number of connectors: 3
• Fabrication Number: ECS-BM-001

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• for OE number: 13 62 7 808 013
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-BM-002
• Manufacturer: NTY

• Number of pins: 3
• Fabrication Number: ECS-BM-003
• Manufacturer: NTY

• Engine Code: N47 D20 A, N47 D20 C
• Construction Year to: 09.2008
• Block Separation:
• Number of connectors: 3
• Material: Plastic
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Fitting Position: before soot particulate filter
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV351

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• for OE number: 13 62 8 507 634
• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Fabrication Number: ECS-BM-005
• Manufacturer: NTY

• Fitting Position: Exhaust Gas Recirculation
• Manufacturer Restriction: BMW, Mercedes-Benz
• Number of pins: 2
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Number of pins: 3
• not for emission standard: Euro 3 (D3)
• Colour: black
• Material: Plastic
• Manufacturer: AIC

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: N47 D20 A, N47 D20 C
• Construction Year to: 09.2008
• Block Separation:
• Number of pins: 3
• Manufacturer: JPN

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Engine Code: N47 D20 A
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Engine Code: N47 D20 A, N47 D20 C
• Construction Year to: 09.2008
• Block Separation:
• Number of connectors: 3
• Material: Plastic
• Fitting Position: before soot particulate filter
• Weight [kg]: 0.03
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: N47 D20 A
• Construction Year from: 09.2008
• Number of pins: 3
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Exhaust System: before soot particulate filter
• Mounting Type: Clipped
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: HEL
• Lisainfo: 6PP009409-021
• Additional information: 6PP009409-021

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Exhaust System: before turbocharger
• Surve alates (Pa): 13 600
• Surve (Pa) kuni: 400 000
• Manufacturer: NRF

• Output Voltage [V]: 5
• Pressure from [kPA]: 97
• Number of connectors: 4
• Number of mounting bores: 1
• Rated Voltage [V]: 5
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Connector Shape: oval
• Colour: black
• Name: SN EGP150.01
• Manufacturer: SNR

• Engine Code: N47 D20 C
• for facelift:
• Fitting Position: before soot particulate filter
• Vehicle Equipment: for vehicles with urea injection (AdBlue®)
• Number of pins: 3
• Number of connectors: 2
• Supplementary Article/Info 2: without connection line
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV801

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Exhaust System: after soot particulate filter
• Number of pins: 3
• Number of connectors: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV665

• Engine Code: N47 D20 A, N47 D20 C
• Construction Year to: 09.2008
• Block Separation:
• Number of connectors: 3
• Material: Plastic
• Fitting Position: before soot particulate filter
• Name: SW 20 94 7155
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Manufacturer: JPN

• Fitting Position: before soot particulate filter
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV350

• Exhaust System: before turbocharger
• Number of pins: 3
• Opening pressure [kPa]: 42
• Manufacturer: DLP

Name: CZUJNIK CI—N. SPALIN BMW 116D, 118D, X6 XDRIVE 40D 04-

• Construction Year to: 09.2008
• Guarantee: 5 years guarantee
• Number of connectors: 3
• Manufacturer: HUCO
• Name: HU 137417

• Pistikkontaktide arv: 3
• OE-numbri jaoks: 13627808013
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Output Voltage [V]: 5
• Pressure from [kPA]: 502
• Number of connectors: 3
• Number of mounting bores: 3
• Rated Voltage [V]: 5
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 125
• Connector Shape: oval
• Colour: black
• Name: SN EGP150.04
• Manufacturer: SNR

• Exhaust System: before soot particulate filter
• alternatively:
• Number of pins: 3
• Opening pressure [kPa]: 89.9
• Manufacturer: DELPHI
• Name: DE DPS00004

• for OE number: 13627805152
• Manufacturer: MEAT&DORIA

• Engine Code: N47 D20 A
• Fitting Position: before soot particulate filter
• Surve alates [kPA]: 10
• Surve kuni [kPA]: 213
• Väljundpinge alates [V]: 0,93
• Väljundpinge kuni [V]: 4,75
• Manufacturer: FACET

• Exhaust System: before soot particulate filter
• Connector Shape: D Shape
• Number of circuits: 1
• Number of pins: 3
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 370
• Fitting Position: before soot particulate filter
• Manufacturer: DENCKERMANN ELEKTRONIKA CEWKI CZUJNIKI

• Number of pins: 3, 1
• Connector Shape: oval
• Name: Andur, heitgaasisurve
• Manufacturer: MAX

• Engine Code: N47 D20 A
• Fitting Position: before exhaust turbocharger
• Pressure from [kPA]: 14
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 3.643
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Alternatively:
• Number of connectors: 3
• Connector Shape: D Shape
• Alternative Repair Kit: 551441
• Manufacturer: ERA

• Engine Code: N47 D20 A
• Fitting Position: before exhaust turbocharger
• Pressure from [kPA]: 14
• Pressure to [kPA]: 400
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 3.643
• Manufacturer: FACET

• Keermemõõt: M12x1.25
• Pistikkontaktide arv: 2
• Seerianumber: EGT-BM-004
• Kaablipikkus (mm): 375
• Manufacturer: NTY

• Cable Length [mm]: 460
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV449

• Pistikkontaktide arv: 3
• Surve alates (Pa): 42 000
• Surve (Pa) kuni: 502 000
• Manufacturer: FAE

• Cable Length [mm]: 590
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV448

• Required quantity: 1
• Fitting Position: before catalytic converter
• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 2
• Fitting Depth [mm]: 32
• Cable Length [mm]: 370
• Socket colour: black
• Spanner Size: 12
• Thread Size: M12x1.25
• Manufacturer: NRF KLIMATYZACJA

• Fitting Position: after soot particulate filter
• Guarantee: 5 years guarantee
• Number of connectors: 1
• Number of pins: 3
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Engine Code: N47 D20 C
• Fitting Position: before soot particulate filter
• Guarantee: 5 years guarantee
• Number of connectors: 2
• Number of pins: 3
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 13627808013
• Manufacturer: MEAT&DORIA

• Fitting Position: Front Axle
• Fitting Depth [mm]: 32
• Cable Length 1 [mm]: 370
• Number of connectors: 2
• Thread Size: M12x1,25-6h
• Spanner Size 1 [mm]: 14
• Tightening Torque [Nm]: 45
• Rated Voltage [V]: 5
• Operating temperature from [°C]: -40
• Operating temperature to [°C]: 850
• Sensor Type: NTC Sensor
• Connector Shape: D Shape
• Line insulation design: with silicone insulation
• Mounting Type: Plugged
• Name: SN EGT150.01
• Manufacturer: SNR

• Vehicle Equipment: for vehicles with SCR system
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Fabrication Number: EGT-BM-014
• Cable Length [mm]: 300
• Manufacturer: NTY

• Fitting Position: before catalytic converter
• Required quantity: 1
• Montaaživiis: kruvitud
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 370
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: CZUJNIK TEMP. SPALIN BMW
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Voltage [V]: 12
• Cable Length [mm]: 400
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 30SKV104
• Manufacturer: ESEN SKV

• Construction Year to: 09.2008
• Number of pins: 3
• Manufacturer: FAE

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 375
• Overall Length [mm]: 495
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M12 x 1,25
• Spanner Size: 14
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Fitting Position: before exhaust turbocharger
• Number of pins: 3
• Name: Andur, heitgaasisurve
• Manufacturer: MEY

• Exhaust System: before catalytic converter
• Length [mm]: 370
• Thread Size: M12 X 1,25
• Number of pins: 2
• Manufacturer: JPN

• Fitting Position: before soot particulate filter
• Emission Standard: Euro 4
• Number of pins: 2
• Cable Length [mm]: 400
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Fitting Position: before catalytic converter
• Cable Length [mm]: 380
• Number of pins: 5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• for OE number: 13 62 7 805 606
• Number of pins: 2
• Supplementary Article/Info 2: with cable
• Guarantee: 3 years guarantee
• Exhaust System: after soot particulate filter
• Socket colour: black
• Weight [kg]: 0.07
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV399

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Engine Code: N47 D20 C
• Vehicle Equipment Line/Variant: Blue Performance
• for facelift:
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: PIERBURG

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 420
• Name: DE ES21086-12B1
• Manufacturer: DELPHI

• Engine Code: N47 D20 C
• Fitting Position: EGR valve at manifold
• Cable Length [mm]: 375
• Overall Length [mm]: 466
• Number of pins: 2
• Manufacturer: METZGER

• for facelift:
• Engine Code: N47 D20 C
• Fitting Position: Exhaust Manifold
• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• Manufacturer: METZGER

• Fitting Position: before catalytic converter
• Cable Length [mm]: 370
• Number of pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

• Engine Code: N47 D20 C
• Fitting Position: after catalytic converter
• Cable Length [mm]: 310
• Number of pins: 2
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Socket colour: black
• Weight [kg]: 0.07
• Shape: straight
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV451

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV407

• Fitting Position: after soot particulate filter
• Supplementary Article/Info 2: without connection line
• Number of connectors: 1
• Number of pins: 3
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter

• Fitting Position: after catalytic converter
• Engine Code: N47 D20 C
• Shape: straight
• Connector Shape: oval
• Cable Length [mm]: 265
• Socket colour: black
• Number of pins: 2
• Manufacturer: METZGER

• Oxygen Sensor: Regulating Sensor, Heated
• Number of circuits: 5
• Length [mm]: 420
• Resistor [Ohm]: 4.9
• Conductor Number: 5
• Cable Length [mm]: 420
• Manufacturer: MAGNETI MARELLI

• Cable Length [mm]: 395
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 35
• Connecting thread: M12x1,25
• Alternative Repair Kit: 551148
• Manufacturer: ERA

• Oxygen Sensor: Broadband Oxygen Sensor
• Number of pins: 5
• Cable Length [mm]: 410
• Quality: OE EQUIVALENT
• for OE number: A0035427018
• Manufacturer: MEAT&DORIA

• Engine Code: N47 D20 C
• Fitting Position: Particulate Filter
• Number of pins: 2
• Version: IAM
• Manufacturer: METZGER

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Shape: straight
• Number of pins: 2
• Connector Shape: oval
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Manufacturer: VIEROL

General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

• Engine Code: N47 D20 A
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Name: EP 1.998.467
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Engine Code: N47 D20 A
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 5
• Number of circuits: 5
• Manufacturer: FACET

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 5
• Cable Length [mm]: 406
• Weight [kg]: 0.097
• Name: SW 33 10 4087
• Manufacturer: SWAG