Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Lower,
Oil Filter Housing - Material: Plastic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Upper,
Oil Filter Housing - Material: Plastic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Oil Filter Housing,
Lower - Material: Plastic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: METZGER
-
Fitting Position: Oil Filter Housing,
Upper - Material: Plastic
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Manufacturer: METZGER
-
Engine Code: N47 D20 A,
N47 D20 C - Block Separation:
- Construction Year to: 12.2009
- Inner Diameter [mm]: 18
- Hose Length [mm]: 322
- Weight [kg]: 0.132
- Supplementary Article/Supplementary Info: with quick coupling
- Manufacturer: FEBI
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Upper
- Cooling Hose: Engine to piping
- Material: Plastic
- Colour: black
- Pipe length [mm]: 150
- Inner Diameter [mm]: 32
- Observe broschure:
- Name: Jahutusvedeliku torustik
- Manufacturer: GAT
- Manufacturer: VAICO
Cooling Hose: from heat exchanger to water pump, from heat exchanger to auxiliary water pump General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Type: Automatic Transmission
- for special equipment code: S205A
-
for type code: PN31,
PN32, PN35, PN36, VG91, VG92, VG96 -
Fitting Position: Lower Left,
Radiator - Cooling Hose: Radiator to automatic transmission cooler
- Guarantee: 3 years guarantee
- Weight [kg]: 0.12
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
-
Fitting Position: Right,
Lower - Hose Type: Moulded Hose
-
Supplementary Article/Info 2: with quick couplers,
with staples - Cooling Hose: from coolant regulator housing to engine cooler
- Manufacturer: TOPRAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber), Rubber with fabric lining General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Lower
- Colour: black
- Hose Length [mm]: 361
- Inner Diameter 1 [mm]: 38
- Inner Diameter 2 [mm]: 38
- Observe broschure:
- Manufacturer: GATES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Cooling Hose: from engine to engine cooler
- Weight [kg]: 0.427
- Manufacturer: FEBI BILSTEIN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Lower
- Cooling Hose: from engine cooler to water pump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Engine
- Manufacturer: METZGER
- Fitting Position: Upper
- Colour: black
- Hose Length [mm]: 390
- Inner Diameter 1 [mm]: 37
- Inner Diameter 2 [mm]: 8
- Observe broschure:
- Name: Jahutusvoolik
- Manufacturer: GAT
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Width [mm]: 222
- Cooling Hose: from thermostat to radiator
- Hose Length [mm]: 310
- Fitting Position: Lower Right
- Weight [kg]: 0.326
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: FEBI BILSTEIN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Lower Right
- Cooling Hose: from thermostat to radiator
- Supplementary Article/Info 2: with quick couplers
- Manufacturer: METZGER
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Fitting Position: Upper Left
- Weight [g]: 670
- Length [mm]: 566
- Inner Diameter 1 [mm]: 34
- Inner Diameter 2 [mm]: 33
- Inner Diameter 3 [mm]: 19
- Name: Jahutusvoolik
- Manufacturer: IMP
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
- Width [mm]: 222
- Cooling Hose: from thermostat to radiator
- Hose Length [mm]: 310
- Fitting Position: Lower Right
- Weight [kg]: 0.326
- Supplementary Article/Info 2: with quick couplers
- Name: SW 20 10 0615
- Manufacturer: SWAG
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: üleval
- OE-numbri jaoks: 17 12 8 511 623
- Pikkus (mm): 543
- Garantii: 3 aastat garantii
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
Manufacturer: METALCAUCHO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks