Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Length [mm]: 670
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Sensor,
brake lining wear, front -
Additional information: Sensor,
brake lining wear, front
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Length [mm]: 685
- Manufacturer: JP GROUP
-
Lisainfo: Sensor,
brake lining wear, rear -
Additional information: Sensor,
brake lining wear, rear
Lisainfo: Sensor, brake lining wear, rear
- Fitting Position: Rear Axle
- Width [mm]: 122
- Thickness [mm]: 17
- Wear Warning Contact: excl. wear warning contact
- Brake System: ATE
- Height 1 [mm]: 59
- Height 2 [mm]: 58
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Lisainfo: JQ1013496 KAMOKA
- Additional information: JQ1013496 KAMOKA
- Fitting Position: Rear Axle
- Brake System: Teves
- Height 1 [mm]: 56.8
- Height 2 [mm]: 57.8
- Width 1 [mm]: 121.8
- Width 2 [mm]: 121.8
- Thickness [mm]: 17.3
- Wear Warning Contact: prepared for wear warning indicator
- Manufacturer: JP GROUP
-
Lisainfo: Brake pad set,
rear, 17.3 mm -
Additional information: Brake pad set,
rear, 17.3 mm
- Fitting Position: Front Axle
- Number of wear indicators [per axle]: 1
- Supplementary Article/Info 2: with cable
- Length [mm]: 670
- Wear Warning Contact: Change warning contact together with the pads
- Brake Type: Disc Brake
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Number of wear indicators [per axle]: 1
- Supplementary Article/Info 2: with cable
- Length [mm]: 670
- Wear Warning Contact: Change warning contact together with the pads
- Brake Type: Disc Brake
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle Left
- Required quantity: 1
- Brake Type: Disc Brake
- Manufacturer: DENCKERMANN HAMULCE
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Manufacturer Restriction: ATE
- Length [mm]: 883
- Manufacturer: JPN
- Brake Type: Disc Brake
- Fitting Position: Front Axle
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Brake Type: Disc Brake
- Fitting Position: Rear Axle
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Brake System: ATE
- Length [mm]: 670
- Supplementary Article/Supplementary Info: Axle Kit
- Manufacturer: QUICK BRAKE
- Brake Type: Disc Brake
- Fitting Position: Front Axle Left
- Length [mm]: 680
- Manufacturer: JPN
- Length [mm]: 670
- Supplementary Article/Info 2: with cable
-
Fabrication Number: HCZ-
BM- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Brake Type: Disc Brake
- Fitting Position: Rear Axle
- for OE number: 34 35 6 759 918
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Brake Type: Disc Brake
- Fitting Position: Rear Axle both sides
- Length [mm]: 670
- Manufacturer: JPN
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Brake System: ATE
- Length [mm]: 760
- Supplementary Article/Supplementary Info: Axle Kit
- Manufacturer: QUICK BRAKE
- Length [mm]: 670
- Supplementary Article/Info 2: with cable
-
Fabrication Number: HCZ-
BM- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
-
Fabrication Number: HCZ-
BM- 062 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Cable Length [mm]: 670
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Rear Axle
- Length [mm]: 883
- Warning Contact Length [mm]: 885
- Brake Type: Disc Brake
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cable Length [mm]: 885
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Warning Contact Length [mm]: 678
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Cable Length [mm]: 685
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Fitting Position: Front Axle Left,
Front Axle - Brake Type: Disc Brake
- Warning Contact Length [mm]: 672
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Brake System: ATE
- Length 1 [mm]: 670
- Brake Type: Disc Brake
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LZ0170
- Quality class: PJ
Additional information: "Tootja: DELPHI
5 (E60), 07.03-
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
5 (E60), 07.03-
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 680
- Manufacturer: TRW
- Quality class: Q
- Name: Wear indicator
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 883
- Weight [kg]: 0.04
- Number of wear indicators [per axle]: 1
- Manufacturer Restriction: ATE
- Manufacturer: ABS
- Fitting Position: Rear Axle
- Brake System: ATE
- Length 1 [mm]: 780
- Brake Type: Disc Brake
- Name: DE LZ0171
- Manufacturer: DELPHI
- Quality class: PJ
Additional information: "Tootja: DELPHI
5 (E60), 07.03-
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
5 (E60), 07.03-
(kvaliteediklass: PJ)"
- Length [mm]: 670
- Fitting Position: Front Axle Left
- Brake Type: Disc Brake
- Weight [kg]: 0.042
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Left
- Brake Type: Disc Brake
- Length [mm]: 670
- Number of wear indicators [per axle]: 1
- Manufacturer: BREMBO
- Required quantity: 1
- Fitting Position: Front Axle Left
- Brake Type: Disc Brake
- Length [mm]: 670
- Manufacturer: METZGER
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 685
- Manufacturer: TRW
- Quality class: Q
- Name: Wear indicator
SVHC: No information available, please contact the manufacturer!
- Length [mm]: 685
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Brake Type: Disc Brake
- Weight [kg]: 0.042
- Name: SW 20 92 3025
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 670
- Fitting Position: Front Axle Left
- Brake Type: Disc Brake
- Weight [kg]: 0.042
- Name: SW 20 92 3021
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Length [mm]: 670
- Weight [kg]: 0.04
- Number of wear indicators [per axle]: 1
- Manufacturer: ABS
- Length [mm]: 685
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Brake Type: Disc Brake
- Weight [kg]: 0.042
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Length [mm]: 685
- Brake Type: Disc Brake
- Manufacturer: BOSCH
- Name: BS 1987473003
- Special Purpose Vehicle: for government vehicles
-
not for country specific design: China
(Taiwan) - Fitting Position: Front Axle
- Brake System: TEVES
- Width [mm]: 155
- Height [mm]: 68.3
- Thickness [mm]: 18.8
- Width 2 [mm]: 156
- Height 2 [mm]: 68.2
- Thickness 2 [mm]: 19.9
- WVA Number: 24688
- Wear Warning Contact: incl. wear warning contact
- Number of wear indicators [per axle]: 2
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - Weight [kg]: 1.915
- Manufacturer: VALEO
- Name: VA 302273
-
Additional information: 302-
273- 786 -
Lisainfo: 302-
273- 786
- Fitting Position: Front Axle Left
- Brake Type: Disc Brake
- Length [mm]: 670
- Packaging length [cm]: 26
- Packaging width [cm]: 15
- Packaging height [cm]: 1
- Weight [kg]: 0.038
- Manufacturer: TEXTAR
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Weight [kg]: 0.036
- Warning Contact Length [mm]: 780
- Manufacturer: TOMEX C
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 685
- Number of wear indicators [per axle]: 1
- Name: BR A 00 229
- Manufacturer: BREMBO
- Required quantity: 1
- Fitting Position: Rear Axle
- Brake Type: Disc Brake
- Length [mm]: 664
- Manufacturer: ATE
- Fitting Position: Front Axle
- Brake Type: Disc Brake
- Weight [kg]: 0.036
- Warning Contact Length [mm]: 680
- Manufacturer: TOMEX C
- Engine Code: N52N
- Required quantity: 1
- Fitting Position: Front Axle Left
- Brake Type: Disc Brake
- Length [mm]: 662
- Manufacturer: ATE
- Brake Type: Disc Brake
- Fitting Position: Front Axle
- Warning Contact Length [mm]: 670
- Required quantity: 1
- Manufacturer: MEYLE
- Fitting Position: Front Axle
- Length [mm]: 670
- Brake Type: Disc Brake
- Manufacturer: BOSCH
- Length [mm]: 122
-
Width [mm]: 59.2,
58.2 - Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
-
WVA Number: 23732,
23737 - Manufacturer: JAPKO
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Manufacturer Restriction: ATE
- Height 1 [mm]: 58
- Height 2 [mm]: 59.2
- Width 1 [mm]: 121.8
- Width 2 [mm]: 121.8
- Thickness 1 [mm]: 17
- Thickness 2 [mm]: 17
- Manufacturer: JPN
- Length [mm]: 122
-
Width [mm]: 59.2,
58.2 - Test Mark: ECE R90 Approved
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
-
WVA Number: 23732,
23737 -
Manufacturer: ASHIKA-
KLOCKI
- Fitting Position: Front Axle
- Special Purpose Vehicle: not for government vehicles
- Brake System: ATE
- Width 1 [mm]: 154.6
- Width 2 [mm]: 155.1
- Height [mm]: 63.5
- Thickness [mm]: 20.3
- Test Mark: ECE R90
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front Axle
- Brake System: ATE
- Width 1 [mm]: 155.1
- Height [mm]: 68.3
- Thickness [mm]: 20.3
- Test Mark: ECE R90
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Front Axle
- Width [mm]: 155
- Thickness [mm]: 20
- Height [mm]: 68
- Brake System: ATE
- Manufacturer: KAMOKA
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Manufacturer Restriction: ATE
- Height 1 [mm]: 58
- Height 2 [mm]: 59.2
- Width 1 [mm]: 121.8
- Width 2 [mm]: 121.8
- Thickness 1 [mm]: 17
- Thickness 2 [mm]: 17
- Manufacturer: PROFIPOWER
- Fitting Position: Front Axle
- Width [mm]: 155
- Thickness [mm]: 20
- Height [mm]: 68
- for OE number: 34 11 2 283 865
- Wear Warning Contact: excl. wear warning contact
- Brake System: ATE
- Manufacturer: KAMOKA UK£ADY HAMULCOWE
- Special Purpose Vehicle: for government vehicles
-
Engine Code: N52N,
N53 - Fitting Position: Front Axle
- Block Separation:
- Thickness [mm]: 20.3
- Width [mm]: 155.1
- Height [mm]: 68.3
- Brake System: ATE
- Manufacturer: JPN
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Special Purpose Vehicle: not for government vehicles
- Fitting Position: Front Axle
- Thickness [mm]: 20.3
- Height [mm]: 63.5
- Brake System: ATE
- Width 1 [mm]: 154.6
- Width 2 [mm]: 155.1
- Manufacturer: DENCKERMANN ZAWIESZENIE
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Special Purpose Vehicle: for government vehicles
- Fitting Position: Front Axle
- Width [mm]: 155.1
- Thickness [mm]: 20.3
- Height [mm]: 68.3
- Brake System: ATE
- Manufacturer: DENCKERMANN ZAWIESZENIE
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Fitting Position: Front Axle
- Length [mm]: 155
- Height [mm]: 68
- Thickness [mm]: 20.3
-
WVA Number: 23312,
23347 - Manufacturer: ASHIKA
- Engine Code: N52N
- Fitting Position: Front Axle
- Wear Warning Contact: prepared for wear warning indicator
- Manufacturer Restriction: ATE
- Height 1 [mm]: 63.5
- Height 2 [mm]: 63.5
- Width 1 [mm]: 155.2
- Width 2 [mm]: 154.7
- Thickness 1 [mm]: 19.5
- Thickness 2 [mm]: 19.5
- Manufacturer: PROFIPOWER
- Fitting Position: Front Axle
- Width [mm]: 155
- Thickness [mm]: 20
- Height [mm]: 64
- Wear Warning Contact: excl. wear warning contact
- Brake System: ATE
- Manufacturer: KAMOKA
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 155.3
- Height [mm]: 68.5
- Thickness [mm]: 19.8
- Wear Warning Contact: prepared for wear warning indicator
- Number of springs: 4
-
Manufacturer: AUTO-
GH
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Width [mm]: 122
- Thickness [mm]: 17
- Height 1 [mm]: 59.2
- Height 2 [mm]: 58.2
- Wear Warning Contact: prepared for wear warning indicator
- Manufacturer Restriction: ATE
- Observe technical data:
-
Manufacturer: AUTO-
GH
- Fitting Position: Rear Axle
- Brake System: TEVES
- Width [mm]: 122
- Height [mm]: 58.2
- Thickness [mm]: 17
- Width 2 [mm]: 122
- Height 2 [mm]: 58.2
- Thickness 2 [mm]: 17
- WVA Number: 23732
- Wear Warning Contact: excl. wear warning contact
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - Weight [kg]: 1.25
- Name: VA 301754
- Manufacturer: VALEO
- Quantity per packing unit: 4
- Fitting Position: Rear Axle
- Thickness [mm]: 17
- Width [mm]: 122
- Height 1 [mm]: 59.2
- Height 2 [mm]: 58.2
- Wear Warning Contact: prepared for wear warning indicator
- Brake System: ATE
- Weight [kg]: 1.25
- Manufacturer: TOMEX C
- Fitting Position: Rear Axle
- Width 1 [mm]: 121.8
- Height 1 [mm]: 58
- Thickness 1 [mm]: 17
- Width 2 [mm]: 121.8
- Height 2 [mm]: 59.2
- Thickness 2 [mm]: 17
- Brake System: ATE
- Manufacturer Restriction: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.15
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Length [mm]: 155.2
- Width [mm]: 68.4
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 19.5
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 2.04
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake System: Ate
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Height 1 [mm]: 63.5
- Height 2 [mm]: 63.5
- Wear Warning Contact: prepared for wear warning indicator
- Vibration: with vibration damper
- Width 1 [mm]: 154.6
- Width 2 [mm]: 155.1
- Thickness 1 [mm]: 20
- Manufacturer: METELLI UKL.HAMULCOWY
- Fitting Position: Front Axle
- Brake System: TEVES
- Width [mm]: 155
- Height [mm]: 63.3
- Thickness [mm]: 20.3
- Width 2 [mm]: 155
- Height 2 [mm]: 63.3
- Thickness 2 [mm]: 20.3
- WVA Number: 23794
- Wear Warning Contact: excl. wear warning contact
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - Weight [kg]: 1.867
- Manufacturer: VALEO
- Name: VA 301640
- Fitting Position: Rear Axle
- Brake System: Ate
- Quantity per packing unit: 4
-
Test Mark: ECE-
R90 - Height 1 [mm]: 59.2
- Height 2 [mm]: 57.9
- Wear Warning Contact: prepared for wear warning indicator
- Vibration: with vibration damper
- Width 1 [mm]: 122
- Width 2 [mm]: 122
- Thickness 1 [mm]: 17
- Manufacturer: METELLI UKL.HAMULCOWY
- Length [mm]: 155.3
- Width [mm]: 68.5
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 19.8
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 2.173
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Width 1 [mm]: 155
- Height 1 [mm]: 68.5
- Thickness 1 [mm]: 20.3
- Width 2 [mm]: 155.1
- Height 2 [mm]: 68.5
- Thickness 2 [mm]: 20.3
- Brake System: ATE
- Manufacturer Restriction: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.93
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Length [mm]: 155.2
- Width [mm]: 68.4
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 19.5
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 2.04
- Name: SW 20 91 6433
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 155.3
- Width [mm]: 68.5
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 19.8
- Wear Warning Contact: prepared for wear warning indicator
- Name: SW 20 11 6031
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 122
-
Width [mm]: 59.2,
58.2 - Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.18
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake System: TEVES
- Width [mm]: 155
- Height [mm]: 68.2
- Thickness [mm]: 20
- Width 2 [mm]: 155
- Height 2 [mm]: 68.2
- Thickness 2 [mm]: 20
- WVA Number: 23312
- Wear Warning Contact: excl. wear warning contact
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - Weight [kg]: 1.91
- Manufacturer: VALEO
- Name: VA 301410
Special Purpose Vehicle: for driving school cars, for ambulances, for police vehicles, for taxis
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- FMSI Code: D1042
-
Test Mark: E1 90R-
01878/ 1290 - Brake System: Continental
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
WVA Number: 23732,
23737 -
Friction Lining Material: Low-
Metallic - Wear Warning Contact: prepared for wear warning indicator
- Width 1 [mm]: 122.2
- Width 2 [mm]: 122
- Height 1 [mm]: 57.7
- Height 2 [mm]: 58.1
- Thickness 1 [mm]: 17
- Thickness 2 [mm]: 17
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Additional information: LP1927 DELPHI
- Lisainfo: LP1927 DELPHI
- Length [mm]: 122
-
Width [mm]: 59.2,
58.2 - Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.18
- Name: SW 20 91 6466
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Brake System: ATE
- WVA Number: 23447
- Length 1 [mm]: 122
- Height 1 [mm]: 58.2
- Height 2 [mm]: 58.2
- Thickness 1 [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- Manufacturer: MAGNETI MARELLI
- Length [mm]: 122
-
Width [mm]: 59,
58 - Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Rear Axle
- Thickness 1 [mm]: 17
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.18
- Observe service information:
- Manufacturer: BLUE PRINT HAMULCE
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- FMSI Code: D1260 D918
-
Test Mark: E1 90R-
02A0378/ 0584 - Brake System: Continental
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
WVA Number: 23312,
23313 -
Friction Lining Material: Low-
Metallic - Wear Warning Contact: prepared for wear warning indicator
- Width 1 [mm]: 155.4
- Width 2 [mm]: 155.5
- Height 1 [mm]: 68.2
- Height 2 [mm]: 68.2
- Thickness 1 [mm]: 20
- Thickness 2 [mm]: 20
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LP3630
Special Purpose Vehicle: for ambulances, for driving school cars, for police vehicles, for taxis
- for brake disc diameter [mm]: 324
-
Length [mm]: 154.8,
155.2 - Width [mm]: 63.6
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 20
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.842
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for brake disc diameter [mm]: 324
-
Length [mm]: 154.8,
155.2 - Width [mm]: 63.6
- Test Mark: ECE R90 Approved
- Supplementary Article/Info 2: with piston clip
- Fitting Position: Front Axle
- Thickness 1 [mm]: 20
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.842
- Name: SW 20 91 6503
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 16.7
- Length [mm]: 123
- Height 1 [mm]: 58.3
- Height 2 [mm]: 59.4
- Wear Warning Contact: prepared for wear warning indicator
- Brake Lining: With bevelled edges
- Brake System: Teves
-
WVA Number: 23732,
23737 - Name: SK VKBP90316
- Manufacturer: SKF
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Thickness 1 [mm]: 19
- Thickness 2 [mm]: 19
- Height 1 [mm]: 68.4
- Height 2 [mm]: 68.4
- Width 1 [mm]: 155.2
- Width 2 [mm]: 155.2
- Wear Warning Contact: prepared for wear warning indicator
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
- WVA Number: 23312
- Net weight [kg]: 2
- Manufacturer: NK
- Lisainfo: Soovita paigaldussarja 7915644
- Additional information: Soovita paigaldussarja 7915644
Special Purpose Vehicle: for ambulances, for driving school cars, for police vehicles, for taxis
- Fitting Position: Front Axle
- Quantity per packing unit: 4
-
FMSI Code: D1061-
7967 -
Test Mark: E9 90R-
01823/ 2249 - Brake System: Continental
-
Supplementary Article/Info 2: with anti-
squeak plate - Supplementary Article/Supplementary Info: without accessories
-
WVA Number: 23794,
23968 -
Friction Lining Material: Low-
Metallic - Wear Warning Contact: prepared for wear warning indicator
- Width 1 [mm]: 154.8
- Width 2 [mm]: 155.5
- Height 1 [mm]: 63.6
- Height 2 [mm]: 63.6
- Thickness 1 [mm]: 20.3
- Thickness 2 [mm]: 20.3
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Special Purpose Vehicle: not for government vehicles
- Quantity per packing unit: 4
- Fitting Position: Front Axle
- Thickness [mm]: 20.3
- Width [mm]: 154.7
- Height [mm]: 63.5
-
Brake System: ATE-
TEVES - Width 1 [mm]: 155.2
- Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 19.7
- Height [mm]: 63.6
- Wear Warning Contact: prepared for wear warning indicator
- Brake Lining: With bevelled edges
- Brake System: Teves
- Length 1 [mm]: 155.2
- Length 2 [mm]: 154.8
-
WVA Number: 24096,
24193 - Manufacturer: SKF KLOCKI HAM
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Width [mm]: 122
- Thickness [mm]: 17
- Height [mm]: 58
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article/Supplementary Info: with accessories
- Brake System: Teves
-
Supplementary Article/Info 2: with piston clip,
with anti- squeak plate -
WVA Number: 23732,
23737 - Manufacturer: BREMBO
- Name: BR P 06 033
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 324
- Quantity per packing unit: 4
- Number of pads: 4
- Thickness [mm]: 19.4
- Length [mm]: 155.2
- Height [mm]: 68.1
- Wear Warning Contact: prepared for wear warning indicator
- Brake Lining: With bevelled edges
- Brake System: Teves
-
WVA Number: 23312,
23347 - Name: SK VKBP80308
- Manufacturer: SKF
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Width [mm]: 122
- Thickness [mm]: 17
- Height 1 [mm]: 59.2
- Height 2 [mm]: 58.2
- Wear Warning Contact: prepared for wear warning indicator
- Manufacturer Restriction: ATE
-
Test Mark: E9 90R -
01120/ 786 - Observe technical data:
- Manufacturer: TRW
- Quality class: Q
- Name: Brake pads
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Brake System: TRW
-
Supplementary Article/Info 2: with bolts/
screws, with anti- squeak plate - Width [mm]: 106
- Height [mm]: 56.2
- Thickness [mm]: 17.7
- Width 2 [mm]: 106
- Height 2 [mm]: 62.6
- Thickness 2 [mm]: 17.7
-
WVA Number: 24561,
24562 -
Test Mark: ECE-
R90 - Weight [kg]: 1.18
- Manufacturer: VALEO
- Special Purpose Vehicle: for government vehicles
-
not for country specific design: China
(Taiwan) - Fitting Position: Front Axle
- Brake System: TEVES
- Width [mm]: 155
- Height [mm]: 68.3
- Thickness [mm]: 20.3
- Width 2 [mm]: 155
- Height 2 [mm]: 68
- Thickness 2 [mm]: 20.3
- WVA Number: 23312
- Wear Warning Contact: excl. wear warning contact
-
Supplementary Article/Info 2: with anti-
squeak plate -
Test Mark: ECE-
R90 - Weight [kg]: 2.025
- Manufacturer: VALEO
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 122
- Thickness [mm]: 17
- Height 1 [mm]: 59.2
- Height 2 [mm]: 58.2
- Wear Warning Contact: prepared for wear warning indicator
-
Test Mark: E9 90R-
02A1148/ 3105 - Manufacturer: TRW
- Quality class: Q
- Name: Brake pads
Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 155.3
- Height [mm]: 68.5
- Thickness [mm]: 19.8
- Wear Warning Contact: prepared for wear warning indicator
- Number of springs: 4
-
Test Mark: E1 90R -
01024/ 575 - Manufacturer: TRW
- Quality class: Q
- Name: Brake pads
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Width [mm]: 155
- Thickness [mm]: 20
- Height [mm]: 68
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article/Supplementary Info: with accessories
- Brake System: Teves
-
Supplementary Article/Info 2: with piston clip,
with anti- squeak plate -
WVA Number: 23312,
23313 - Manufacturer: BREMBO
- Name: BR P 06 054
- Fitting Position: Rear Axle
-
Article number of recommended accessories: 8DK 355 250-
651, 8DZ 355 201- 411 - Quantity per packing unit: 4
- Width 1 [mm]: 121.8
- Width 2 [mm]: 121.8
- Height 1 [mm]: 56.8
- Height 2 [mm]: 57.8
- Thickness [mm]: 17.3
- Wear Warning Contact: prepared for wear warning indicator
- WVA Number: 23732
- Brake System: Teves
- Weight [kg]: 1.25
- Assy./disassy. by qualified personnel required!:
- Name: HE 8DB355010471
- Manufacturer: HELLA PAGID
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 320
-
paired article number: 562319JC,
562319JC- 1 - Quantity per packing unit: 4
- Brake System: ATE
- Supplementary Article/Supplementary Info: without accessories
- Supplementary Article/Info 2: with piston clip
- Width [mm]: 122
- Height [mm]: 58.2
- Height 1 [mm]: 58.2
- Thickness [mm]: 17
-
Article number of recommended accessories: FWI277,
FWI291 -
WVA Number: 23732,
23737 - Test Mark: R90 Homologated
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 1.15
- Packing Type: Carton
- Packaging length [cm]: 20.6
- Packaging width [cm]: 12.2
- Packaging height [cm]: 7.8
- Manufacturer: JURID
- Fitting Position: Rear Axle
- Width [mm]: 121.8
- Height 1 [mm]: 59.2
- Height 2 [mm]: 57.8
- Thickness [mm]: 17.3
- Spring Clip Diameter [mm]: 25
- Brake System: ATE
-
Test Mark: E1 90R-
02A0525/ 0487 - MAPP code available:
-
Article number of recommended accessories: 24.8190-
0274.2, 24.8190- 0275.2 - Observe dimensions:
- Manufacturer: ATE
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Manufacturer Restriction: ATE
- Width [mm]: 155.3
- Height [mm]: 68.5
- Thickness [mm]: 19.8
- Number of springs: 4
- Wear Warning Contact: prepared for wear warning indicator
-
Test Mark: E9 90R-
02A1062/ 0919 - Manufacturer: TRW
- Quality class: Q
- Name: Brake pads
Braking System: Low dust brake pads, also for perforated brake discs SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
-
Supplementary Article/Info 2: with anti-
squeak plate, with mounting manual -
Article number of recommended accessories: 1987473003,
1987474693, 1987474366, 1987473005 - Observe technical data:
-
Material: Low-
Metallic -
Test Mark: ECE-
R90 - WVA Number: 23732
- Thickness [mm]: 17.04
- Width [mm]: 121.9
- Height 1 [mm]: 58
- Height 2 [mm]: 59.2
- Manufacturer: BOSCH
- Fitting Position: Rear Axle
- Quantity per packing unit: 4
- Width [mm]: 122
- Thickness [mm]: 17
- Height [mm]: 58
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Teves
-
Supplementary Article/Info 2: with anti-
squeak plate -
WVA Number: 23732,
23737 - Manufacturer: BREMBO
- Name: BR P 06 033X
General Information: Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.
- Special Purpose Vehicle: not for government vehicles
- Engine Code: N52N
- Fitting Position: Front Axle
- Width 1 [mm]: 154.6
- Width 2 [mm]: 155.1
- Height [mm]: 63.5
- Thickness [mm]: 20.3
- Brake System: ATE
-
Test Mark: E1 90R-
02A0335/ 0227 - MAPP code available:
-
Article number of recommended accessories: 24.8190-
0273.2 - Observe dimensions:
- Manufacturer: ATE
- Quality class: Q
- Name: Brake pads
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Fitting Position: Front Axle
-
Article number of recommended accessories: 98030400,
82072000 - Width [mm]: 155.3
- Height [mm]: 68.3
- Thickness [mm]: 20.3
- Wear Warning Contact: prepared for wear warning indicator
- WVA Number: 23312
- Brake System: Teves
- Observe mounting information:
- Packaging length [cm]: 17
- Packaging width [cm]: 12
- Packaging height [cm]: 8.3
- Weight [kg]: 2.1
- Manufacturer: TEXTAR
- Fitting Position: Front Axle
-
Article number of recommended accessories: 8DK 355 250-
641, 8DZ 355 201- 361 - Quantity per packing unit: 4
- Width [mm]: 155.3
- Height [mm]: 68.3
- Thickness [mm]: 20.3
- Wear Warning Contact: prepared for wear warning indicator
- WVA Number: 23312
- Brake System: Teves
- Observe mounting information:
- Weight [kg]: 2.1
- Assy./disassy. by qualified personnel required!:
- Name: HE 8DB355015391
- Manufacturer: HELLA PAGID
- Fitting Position: Rear Axle
- for brake disc diameter [mm]: 320
- Quantity per packing unit: 4
- Brake System: ATE
- Width [mm]: 121.8
- Width 1 [mm]: 121.8
- Height 1 [mm]: 59.2
- Height 2 [mm]: 58
- Thickness [mm]: 17.3
- Material: Ceramic
-
Article number of recommended accessories: FWI277,
FWI291 -
WVA Number: 23732,
23737 - Test Mark: R90 Homologated
- Wear Warning Contact: prepared for wear warning indicator
- Packing Type: Carton
- Packaging length [cm]: 17.5
- Packaging width [cm]: 10.5
- Packaging height [cm]: 8
- Manufacturer: JURID
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 324
- Quantity per packing unit: 4
- Brake System: ATE
- Width [mm]: 155
- Height [mm]: 68.5
- Height 1 [mm]: 68.5
- Thickness [mm]: 20.3
-
WVA Number: 23312,
23347 - Test Mark: R90 Homologated
- Wear Warning Contact: prepared for wear warning indicator
- Weight [kg]: 2.8
- Packing Type: Carton
- Packaging length [cm]: 20.6
- Packaging width [cm]: 12.2
- Packaging height [cm]: 7.8
- Manufacturer: JURID
- Fitting Position: Front Axle
- Quantity per packing unit: 4
- Width [mm]: 155
- Thickness [mm]: 20
- Height [mm]: 68
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article/Supplementary Info: without accessories
- Brake System: Teves
-
Supplementary Article/Info 2: with anti-
squeak plate -
WVA Number: 23312,
23313 - Manufacturer: BREMBO
- Name: BR P 06 054X
General Information: Brembo Xtra: the perfect brake pad for Brembo Xtra and Brembo Max brake discs.
- Special Purpose Vehicle: for government vehicles
- Engine Code: N52N
- Fitting Position: Front Axle
- Width [mm]: 155.1
- Height [mm]: 68.3
- Thickness [mm]: 20.3
- Number of springs: 4
- Brake System: ATE
-
Test Mark: E1 90R-
02A0334/ 0269 - MAPP code available:
- Observe dimensions:
- Manufacturer: ATE
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0230.2, 24.8190-0271.2, 24.8190-0272.2, 24.8190-0273.2
- Fitting Position: Rear Axle
- Width [mm]: 121.8
- Height 1 [mm]: 59.2
- Height 2 [mm]: 57.8
- Thickness [mm]: 17.3
- Spring Clip Diameter [mm]: 25
- Brake System: ATE
-
Test Mark: E1 90R-
02A0258/ 0339 - MAPP code available:
-
Article number of recommended accessories: 24.8190-
0274.2, 24.8190- 0275.2 - Observe dimensions:
- Permissible up to vehicle capacity [kW]: 225
- Manufacturer: ATE
- Quality class: Q
- Name: Brake pads
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Special Purpose Vehicle: not for government vehicles
- Engine Code: N52N
- Fitting Position: Front Axle
- Width 1 [mm]: 154.6
- Width 2 [mm]: 155.1
- Height [mm]: 63.5
- Thickness [mm]: 20.3
- Brake System: ATE
-
Test Mark: E1 90R-
02A0258/ 0314 - MAPP code available:
-
Article number of recommended accessories: 24.8190-
0273.2 - Observe dimensions:
- Permissible up to vehicle capacity [kW]: 225
- Manufacturer: ATE
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Special Purpose Vehicle: for government vehicles
- Engine Code: N52N
- Fitting Position: Front Axle
- Width [mm]: 155.1
- Height [mm]: 68.3
- Thickness [mm]: 20.3
- Brake System: ATE
-
Test Mark: E1 90R-
02A0334/ 0269 - MAPP code available:
- Manufacturer: ATE
- Quality class: Q
- Name: Brake pads
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Engine Code: N53
- Fitting Position: Front Axle
- Width [mm]: 155.1
- Height [mm]: 68.3
- Thickness [mm]: 20.3
- Brake System: ATE
-
Test Mark: E1 90R-
02A0258/ 0270 - MAPP code available:
- Permissible up to vehicle capacity [kW]: 225
- Manufacturer: ATE
- Quality class: Q
- Name: Brake pads
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Special Purpose Vehicle: for government vehicles
- Engine Code: N52N
- Fitting Position: Front Axle
- Width [mm]: 155.1
- Height [mm]: 68.3
- Thickness [mm]: 20.3
- Number of springs: 4
- Brake System: ATE
-
Test Mark: E1 90R-
02A0258/ 0270 - MAPP code available:
- Observe dimensions:
- Permissible up to vehicle capacity [kW]: 225
- Manufacturer: ATE
Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact Article number of recommended accessories: 24.8190-0230.2, 24.8190-0271.2, 24.8190-0272.2, 24.8190-0273.2 Technical Information: Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks